About the Acoustic Research ARS300
No home theater is complete without the deep-down impact a powered subwoofer can deliver; and no sub is better suited to the job than AR's incredible ARS300! Driven by 300 watts of Bob Carver/Sunfire® amplification, the down-firing 12" woofer couples with a low-turbulence trajectory port for tight, clean bass you need to feel to believe.
Want deep, accurate bass for your music, too? Just flip the front-panel contour switch from "Video" to "Audio" and the ARS300 adds the perfect low-end punch to all your tunes.
Details:
- 300-watt RMS Bob Carver/Sunfire® amplifier
- down-firing 12" woofer
- frequency response 22-120 Hz (±2.5 dB)
- continuously variable 50-120 Hz low-pass crossover
- low-turbulence port
- selectable Audio/Video contour switch
- preamp-level input
- dedicated LFE input/output for 5.1-channel bass
- speaker-level inputs and outputs
- phase switch
- video-shielded
- black ash finish
- 16-1/4"H x 15"W x 21"D
- warranty: 5 years subwoofer, 1 year amp
What's in the box:
Acoustic Research ARS300 owner's manual
- Black powered subwoofer
- 70" AC power cord
- Owner's Manual
- Consumer Registration Card
- Caution sheet (discusses proper unpacking techniques)
Customer reviews for Acoustic Research ARS300
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Acoustic Research ARS300
Features & specs
Enclosure | Bass Reflex | |
Woofer Size (inches) | 12 | |
Woofer Composition | Paper | |
Firing Direction | Down | |
Amplifier Output (watts) | 300 | |
Frequency Response | 20-120 Hz | |
Connections | ||
Preamp-Level Inputs | Yes | |
Speaker-Level Inputs | Yes | |
Speaker-Level Outputs | Yes | |
Wireless | No | |
Controls | ||
Low-Pass Crossover Freq | 40-120Hz | |
High-Pass Crossover Freq | None | |
Phase Switch | Yes | |
App Control | --- | |
Remote | --- | |
Other Info | ||
Height (inches) | --- | |
Width (inches) | --- | |
Depth (inches) | --- | |
Weight | --- | |
Speaker Parts Warranty | 1YR/5YRS* | |
Speaker Labor Warranty | 1YR/5YRS* | |
Amplifier Parts Warranty | --- | |
Amplifier Labor Warranty | --- |
Product Research
Features
Controls
Inputs and Outputs
Warranty Note
Driver: The ARS300 has a down-firing 12" paper cone woofer for deep, powerful bass. For a smoother response and improved durability, the driver uses a rubber surround.
Amplifier: The 12" driver is powered by a built-in 300 watt RMS amplifier, which is constructed under license from Sunfire Corporation.
Ports: The dual, low-turbulence trajectory ports give you tight, clean bass.
Audio/Video Contour Switch: This feature is used to optimize the unit's performance for both audio and video listening.
Auto Turn-On: In Auto mode, the unit turns on automatically when an input signal is received and turns off after a period of time without an input signal.
Low-Pass Crossover: The control unit has a built-in low-pass crossover that is adjustable from 40-120Hz. The low-pass crossover has a slope of 36dB per octave.
Phase Control: Allows you to select 0 or 180 degrees for the best bass response.
Front panel:
- Subwoofer Level Control: Slider control allows you to set the subwoofer's volume relative to the rest of the system
- Audio/Video Contour switch: Allows you to select Audio or Video Contour mode
- Signal LED: Blue light is activated when the subwoofer automatically turns on after sensing an input signal
Rear panel:
- Power Switch: Can select Off or Auto on
- Low-pass frequency control: Rotary knob allows you to adjust the low-pass filter from 40-120Hz
- Phase switch: Allows you to select 0 or 180 degrees
- Power On/Standby LED: Glows green when the subwoofer is on and glows red when the subwoofer is in standby mode
Rear panel:
- LFE Direct: Gold-plated mono RCA preamp input. This input is for use on source units that apply a low-pass crossover to their preamp subwoofer/LFE output (such as THX certified units or most Dolby Digital receivers). When using this input, the subwoofer's low-pass filter is by-passed which prevents interactions between the source units crossover and that of this unit.
- LFE Output: Gold-plated mono RCA preamp output. Allows you to loop the LFE input signal out to another LFE input on a powered speaker or subwoofer.
- Normal: Gold-plated left and right RCA preamp-level input.
- Input from Receiver: Binding post speaker-level inputs for left and right loudspeakers
- Output to Speakers: Binding post speaker-level outputs for left and right loudspeakers
- AC: AC input for the supplied power cord
Warranty: Warranty is 5 years for the loudspeaker, 1 year for the electronic amplifier.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Great sub, value for money
Nazrul from Trivandrum