In this blog we will walk you through how to clean and replace the carburetor on a Honda GX160 engine. If the engine won't start or isn't running smoothly, the carb might be the first thing to look at. Follow these steps:
Step 1
Take off the air filter using a 10mm wrench or socket.
Step 2
Unhook the gas line and throttle levers. Then remove the plastic housing cover.
Step 3
Remove the carburetor once all other pieces are removed.
Step 4
Either clean the carburetor in an ultrasonic cleaner or replace the carburetor with a new one.
Step 5
Insert the new or cleaned carburetor into place and slide the gasket into the carburetor.
Step 6
Slide back into place the outside housing and screw the bolt securely.
Step 7
Place the air filter back on and screw the nut. Then place the housing and secure with final nut back into place securely.
You have successfully replaced the Carburetor on a Honda GX160 engine.
