STEP-FOUR GmbH. Bayernstraße 77 5071 Wals-Siezenheim ...

STEP-FOUR GmbH. Bayernstraße 77 5071 Wals-Siezenheim, AUSTRIA 

Tel.: ++43/(0)662/45 93 78-0 Fax: ++43/(0)662/45 93 78-20 E-mail: office@step-four.at Internet: www.step-four.at 

price list international 2/2009 

Qty. Item no. EUR without VAT incl. 20% VAT Total 

90BA0540-GPA 

Milling Machines Basic 540 , working area 510 x 308 x 70 mm 

Basic 540 DOS Basic Package (1) - kit incl. SF-C2 motor control unit and milling software V4 LT 2.270,00 2.724,00 

90BA0540-EPA Basic 540 DOS Beginner's Package (1) - as DOS Basic Package plus KRESS 800 FME, set of bits 2.440,00 2.928,00 

90BA0540-PPA Basic 540 DOS Power Package (1) - as DOS Basic Package plus tool and reference switches, high frequency spindle system, set of bits 3.950,00 4.740,00 

90XSTB0540GP Basic 540 Xpert Start Basic Package - kit incl. SF-C2 motor control unit, XpertLINK and milling software XpertMILL LT 2.680,00 3.216,00 

90XSTB0540EP Basic 540 Xpert Start Beginner's Package - as Xpert Start Basic Package plus KRESS 800 FME and set of bits 2.840,00 3.408,00 

90XSTB0540PP Basic 540 Xpert Start Power Package - as Xpert Start Basic Package plus tool and reference switches, high frequency spindle system, set of bits 4.445,00 5.334,00 

90XADB0540GP Basic 540 Xpert Advance Basic Package - kit incl. XpertCNC motor control unit and milling software XpertMILL basic version, tool and reference switsches 3.640,00 4.368,00 

90XADB0540EP Basic 540 Xpert Advance Beginner's Package - as Xpert Advance Basic Package plus KRESS 800 FME and set of bits 3.820,00 4.584,00 

90XADB0540PP Basic 540 Xpert Advance Power Package - as Xpert Advance Basic Package plus tool and reference switches, high frequency spindle system, set of bits 5.100,00 6.120,00 

7DS4-MONTAGE Assembly of STEP-FOUR Basic 540 milling machine 250,00 300,00 

95ZELLEB0540 Protective cell for Basic 540 610,00 732,00 

96-MUG-B0540 Supporting base for Basic 540 596,00 715,20 

94VACUUMA3WR Vacuum table 4530 for Basic 540, 450 x 300 mm 192,00 230,40 

94VAC-MAT-A3 Protective top skin 4530, 450 x 300 mm (replacement) 7,00 8,40 

97T-NUT-B540 T-slot plate for Basic 540 440,00 528,00 

97T-NUTSPANN T-slot fixing set (12 parts) 210,00 252,00 

90BA1000-GPA 

Milling Machines Basic 1000 , working area 1024 x 420 x 70 mm 

Basic 1000 DOS Basic Package (1) - assembled incl. SF-C2 motor control unit and milling software V4 Pro, tool and reference switches 2.910,00 3.492,00 

90XSTB1000GP Basic 1000 Xpert Start Basic Package - assembled incl. SF-C2 motor control unit, XpertLINK and milling software XpertMILL LT, tool and reference switches 

Basic 1000 Xpert Advance Basic Package - assembled incl. XpertCNC motor control unit and milling software XpertMILL basic version, tool and reference 

3.320,00 3.984,00 

90XADB1000GP switches 4.185,00 5.022,00 

95ZELLEB1000 Protective cell for Basic 1000 810,00 972,00 

96-MUG-B1000 Supporting base for Basic 1000 950,00 1.140,00 

97T-NUT-B100 T-slot plate for Basic 1000 920,00 1.104,00 


90P0760STGPA 

Milling Machines Precise 760 , working area 750 x 458 x 100 mm 

Precise 760 DOS Basic Package - assembled incl. SF-C2 motor control unit and milling software V4 Pro, extension module "Drawing and Object 

Manipulation" and "Reaming and Layer distribution", tool and reference switsches 

Precise 760 Xpert Start Basic Package - assembled incl. SF-C2 motor control unit, XpertLINK and milling software XpertMILL basic version, Xpert[DRAW], 

4.980,00 5.976,00 

90XSTP0760GP Xpert[CAM], tool and reference switches 

Precise 760 Xpert Advance Basic Package - assembled incl. XpertCNC motor control unit and milling software XpertMILL basic version, Xpert[DRAW], 

5.680,00 6.816,00 

90XADP0760GP Xpert[CAM], tool and reference switches, emergency stop switch 6.189,00 7.426,80 

95ZELLEP0760 Protective cell for Precise 760 785,00 942,00 

96-MUG-P0760 Supporting base for Precise 760 850,00 1.020,00 

94VACUUMA2WR Vacuum table 6040 for Precise 760, 600 x 400 mm 230,00 276,00 

94VAC-MAT-A2 Protective top skin 6040, 600 x 400 mm (replacement) 11,00 13,20 

97T-NUT-P760 T-slot plate for Precise 760 630,00 756,00 


91MAGNETPREC Magnetic valves for Precise 760 219,00 262,80 

(1) Since January 2007 the Basic 540/1000 DOS packages come with the milling software V4 Pro instead of the LT version without additional cost. Therefore the backfitting of the XpertMILL milling software is only possible at the full version's and not at the update's price. 

STEP-FOUR GmbH. price list international 2009.xls page 1 01.04.2009


90P1000STGPA 

Milling Machines Precise 1000 , working area 1015 x 598 x 100 mm 

Precise 1000 DOS Basic Package - assembled incl. SF-C2 motor control unit and milling software V4 Pro, extension module "Drawing and Object 

Manipulation" and "Reaming and Layer distribution", tool and reference switsches 

Precise 1000 Xpert Start Basic Package - assembled incl. SF-C2 motor control unit, XpertLINK and milling software XpertMILL basic version, Xpert[DRAW], 

5.420,00 6.504,00 

90XSTP1000GP Xpert[CAM], tool and reference switches 

Precise 1000 Xpert Advance Basic Package - assembled incl. XpertCNC motor control unit and milling software XpertMILL basic version, Xpert[DRAW], 

6.110,00 7.332,00 

90XADP1000GP Xpert[CAM], tool and reference switches, emergency stop switch 6.589,00 7.906,80 

90P1000U-GPA 

90XSTP1000UG 

90XADP1000UG 


Milling Machines Precise 1000 U , working area 1015 x 600 x 160 mm 

Precise 1000 U DOS Basic Package - assembled with supported guidings incl. SF-C2 motor control unit and milling software V4 Pro, extension module 

"Drawing and Object Manipulation" and "Reaming and Layer distribution", tool and reference switsches 

Precise 1000 U Xpert Start Basic Package - assembled with supported guidings incl. SF-C2 motor control unit, XpertLINK and milling software XpertMILL 

6.980,00 8.376,00 

basic version, Xpert[DRAW], Xpert[CAM], tool and reference switches 

Precise 1000 U Xpert Advance Basic Package - assembled with supported guidings incl. XpertCNC motor control unit and milling software XpertMILL basic 

7.690,00 9.228,00 

version, Xpert[DRAW], Xpert[CAM], tool and reference switches, emergency stop switch 8.136,00 9.681,84 

90XADS1600GP 

Milling Machine Superior 1600 , working area 1550 x 998 x 195 mm 

Superior 1600 Basic Package - assembled with supported guidings and ball bearing spindles, incl. XpertCNC motor control unit and milling software 

XpertMILL basic version, Xpert[DRAW], Xpert[CAM], Xpert[3D], supporting base, tool and reference switches, emergency stop switch 15.760,00 18.912,00 

95ZELLEP1600 Protective cell for Superior 1600 1.860,00 2.232,00 

97T-NUT-P160 T-slot plate for Superior 1600 2.045,00 2.454,00 


Electronic Components Xpert 

92XPERT-LINK XpertLINK Windows-adaptor for SF-C2 (sold with a software licence only) 175,00 210,00 

92XPERT-LIFA Xport interface to control external systems (sold with a software licence only) 365,00 438,00 

92XPERTCNC2A XpertCNC Dynamic Step Control 2A (sold with a software licence only) 1.350,00 1.620,00 

92XPERTCNC3A XpertCNC Dynamic Step Control 3A (sold with a software licence only) 1.680,00 2.016,00 

92XPERTCNCSF XpertCNC Dynamic Step Control 2A-SFU with integrated high frequency converter (sold with a software licence only) 1.920,00 2.304,00 

92XPERTNOTAU Xpert emergency stop switch for immediate milling stop 42,00 50,40 

92XPERTH-BOX Xpert remote control box 370,00 444,00 

92XPERTRELAI Xpert relay box 430,00 511,70 



80XPERT-MILT 

Milling Software Xpert 

XpertMILL LT (available only together with SF-C2 motor control unit and milling machine) 220,00 264,00 

80XPERT-MUPD Update of XpertMILL LT to XpertMILL 470,00 564,00 

80XPERT-MILL XpertMILL basic version, single user licence 650,00 780,00 

80XPERT1MCAD Xpert[DRAW], extension module CAD-operation 110,00 132,00 

80XPERT2MTEC Xpert[CAM], extension module milling technology 380,00 456,00 

80XPERT3MIMP Xpert[3D], extension module import filter DIN-ISO G-code, 3D-DXF 250,00 300,00 

80XPERT4MROT Xpert[ROTATION], extension module rotation axis incl. activation of 4th axis in XpertCNC controller 490,00 588,00 

80XPERT5MWZW Xpert[WZW], extension module tool changer 350,00 420,00 

92XPERT-USB1 USB-software protection key to prepare data on external PC (basic equipment) 55,00 66,00 

92XPERT-USB2 USB-software protection key, see above (from second key on, max. 3 keys available per licence) 170,00 204,00 

80XPERT-UPV2 Update of milling software V2 to Xpert MILL 370,00 444,00 

80XPERT-3-LT Update of milling software V3LT to XpertMILL LT 110,00 132,00 

80XPERT-3-GV Update of milling software V3LT to XpertMILL 580,00 696,00 

80XPERT-UPV3 Update of milling software V3 Pro to XpertMILL 260,00 312,00 

80XPERT-UPM1 Update of V3 extension module 1 "Drawing and Object Manipulation" to Xpert[DRAW] 30,00 36,00 

80XPERT-UPM2 Update of V3 extension module 2 "Reaming and Layer Definition" to Xpert[CAM] 210,00 252,00 

80XPERT-4-LT Update of milling software V4LT to XpertMILL LT 70,00 84,00 

80XPERT-UPD1 Update of milling software V4LT to XpertMILL basic version 540,00 648,00 

80XPERT-UPD2 Update of milling software V4 Pro to XpertMILL basic version 160,00 192,00 

80XPERT-UPD3 Update of V4 extension module 1 "Drawing and Object Manipulation" to Xpert[DRAW] 20,00 24,00 

80XPERT-UPD4 Update of V4 extension module 2 "Reaming and Layer Definition" to Xpert[CAM] 160,00 192,00 

80XPERT-UPD5 Update of V4 extension module 3 "3D-NC-Control" to Xpert[3D] 20,00 24,00 

8SWSL-FONT00 Single Line Fonts (6 pcs.) for Windows, engraving fonts 155,00 186,00 

8SW-DP700400 DeskProto 5.x Lite, post-processor to create milling contours 248,00 297,60 

8SW-DP700100 DeskProto 5.x full version, post-processor to create milling contours 995,00 1.194,00 

Electronic Components DOS 

9285000SF-C2 Motor control unit SF-C2 (sold only with a software licence) 480,00 576,00 

92-RB-SFC200 Relay box for SF-C2 to control external devices (router, suction etc.) 130,00 156,00 

92-RB-DONGLE Relay box for interface to control external devices 152,00 182,40 

92-RB-ACDC00 Relay box + to control magnetic valves and external devices 275,00 330,00 

92-NOTAUSBOX Combined emergency stop/relay box 560,00 672,00 

Milling Software DOS 


8SWFR4-XLT00 Milling software V4 LT 160,00 192,00 

8SWUPDATE400 Update of milling software V4LT to V4 Pro 380,00 456,00 

8SWFRPR4-X00 Milling software V4 Pro 490,00 588,00 

8SWFR4-XM100 Extension module 1 "Drawing and Object Manipulation" (only available with V4 Pro) 90,00 108,00 

8SWFR4-XM200 Extension module 2 "Reaming and Layer Distribution" (only available with V4 Pro) 220,00 264,00 

8SWFR4-XM300 Extension module 3 "3D NC-Control" (only available with V4 Pro) 370,00 444,00 

8SWUPD3-4L00 Update of milling software V3LT to V4LT 40,00 48,00 

8SWUPD3-4P00 Update of milling software V3 Pro to V4 Pro 100,00 120,00 

8SWUPD-XM100 Update to extension module 1 V4 (only available with V4 Pro) 10,00 12,00 

8SWUPD-XM200 Update to extension module 2 V4 (only available with V4 Pro) 50,00 60,00 

8SW-DONGLE00 LPT-software protection plug to prepare data on external PC (max. 3 per software licence) 30,00 36,00 

8SW-DONG-USB USB-software protection plug to prepare data on external PC (max. 3 per software licence) 55,00 66,00 

8SW-DONGLF00 Dongle to control external systems (sold only with a software licence) 50,00 60,00 

8SW-IF-PROFI Interface to control external systems incl. current reduction (sold only with a software licence) 136,00 163,20 




Routers / Spindles 

93PROXXON220 PROXXON IB/E 220V router 93,00 111,60 

93KRE-800FME KRESS 800 FME, router 800W, with 6 mm and 1/8" collet 179,00 214,80 

04KRSZ120000 Cap nut for Kress 800 FME 18,20 21,84 

04KRSZ120300 3mm collet for Kress 800 FME 29,00 34,80 

04KRSZ120318 1/8" collet for Kress 800 FME 29,00 34,80 

04KRSZ120600 6mm collet for Kress 800 FME 15,00 18,00 

98-KR-ABSAUG Suction collar 43mm incl. Brush for Kress router 115,00 138,00 

7V-BUERSTE-1 Replacement brush for suction collar, 50mm 32,00 38,40 

7V-BUERSTE-2 Replacement brush for suction collar, 60mm 32,00 38,40 

98-KR-GRAVUR Engraving STEP-FOUR device spindle for height system regulation 160W, cased, for KRESS incl. cooling 800 FME block, router converter or other with 43mm HF-interface routers to control the spindle through the STEP-FOUR milling software, 

310,00 372,00 

93SFSPIND160 cable, 1/8" collet 1.640,00 1.968,00 

93SF-SPINDWH STEP-FOUR HF-spindle 160W, cased, incl. Cooling block, for use with XCNC Dynamic Step Control 2A-SFU with integrated HF-converter 945,00 1.134,00 

98-SF-SLNASE Sealing air nose for HF-spindle 160W incl. 6m tube, plug nipple and screw in union 52,00 62,40 

98-SF-ABS160 suction adaptor for 160W spindle 12,50 15,00 

98-SF-GRAVUR Engraving device for height regulation for STEP-FOUR spindle system and Jäger HF-spindle 33A1 290,00 348,00 

98-SF-ABSAUG suction adaptor for engraving device 41,00 49,20 

322-SFAK0760 HF-spindle-connecting cables for Precise 760/1000/1000 U and Superior 1000 68,00 81,60 

322-SFAK1600 HF-spindle-connecting cables for Superior 1600 70,00 84,00 

04SPANN1/8ZO 1/8“ collet for 160W spindle 45,00 54,00 

04SPANN3-0MM 3mm collet for 160W spindle 45,00 54,00 

04SPANN235MM 2,35mm collet for 160W spindle 45,00 54,00 

93SPIND42-2W STEP-FOUR HF-spindle 42-2 W27 FS 300W, cased, incl. cooling block, converter, cable, collet 1/8“ 4.066,00 4.879,20 

928571IF-EXT STEP-FOUR external HF-interface to control the HF-spindle 42-2 W27 FS 300W through the STEP-FOUR milling software 140,00 168,00 

93-TMPE0-SET ELTE asynchronic spindle 400W incl. external inverter, interface (for software control), 3 collets (3/3.5/6mm), from Precise 760 on 1.580,00 1.896,00 

93TMPE0L-UMF ELTE asynchronic spindle 400W incl. built-in inverter, 3 collets (3/3.5/6mm), from Precise 760 on 970,00 1.164,00 

04-ER11-XXXX collet ER11 1-7mm, in 0.5mm steps 10,80 12,96 

93-HSD1KWSET HSD asynchronic spindle 1000W incl. external converter, interface (for software control), 3 collets (3.5/6/8mm), only for Superior series 1.980,00 2.376,00 

04-ER20-XXXX collet ER20 2-13mm, in 0.5mm steps 13,60 16,32 

00FS-VHM9001-1/8 

Accessories for Milling Machines 

Set of bits, solid carbide, 1/8" shank, two flutes (5 pcs., 0,6, 0,8, 1,2, 1,6, 2 mm) 39,70 47,64 

00FS-VHM-XXX Set of bits, solid carbide, 1/8" shank, two flutes (5 pcs. of type ..........mm) 39,70 47,64 

93SCHLEPPM01 STEP-FOUR plotting knife incl. knife holder, knife, set of films, sample disk 220,00 264,00 

03-MHRD00501 Knife holder 76,00 91,20 

03ERSATZMESS Replacement knife 25,00 30,00 

7VFOLIENSATZ Set of films 11,00 13,20 

93PLOTTSTIFT plotter-pen incl. 4 refills, for 33mm clamp collar 38,00 45,60 

7V--CLEANSET STEP-FOUR maintenance set incl. MAKRA assembly cleaner, service oil plus and SYNCO Super Lube 36,00 43,20 

7VREIN-R3000 MAKRA assembly cleaner 600 ml R3000 5,00 6,00 

7VSERVICEOIL MAKRA service oil plus 300 ml 19,75 23,70 

7VSUPER-LUBE SYNCO Super Lube multi purpose grease, tube 85g 14,50 17,40 

94-MINI-COOL MINI-COOL mist spray unit (compressor not included) 165,00 198,00 

94-MMS-1-UNI Minimal quantity spray unit MMS-1 (compressor not included) 92,50 111,00 

7VJOKISCHN-P JOKISCH lubricant n-Paraffin, 10 kg 94,00 112,80 

94KOMPRESSOR GOLF 231-24 compressor, oilfree, 8 bar, 235 l/min, 1,5 kW 294,00 352,80 

94GM80P-NILF NILFISK GM80P high performance vacuum cleaner, for use with vacuum tables 370,00 444,00 

94STATIC-MAT STATIC-MAT engraving mat 300x300 mm 76,00 91,20 

7VMULTI-TAPE MULTI TAPE double sided tape, 25 mm wide, 50 m long 15,00 18,00 



WING designer V2 Wing Construction Programme 

8S4-WD-UPDV2 Update to WING designer V2 50,00 60,00 

8S4-WD-GRUND Basic module V2 incl. wing editor, data base and printing function 240,00 288,00 

8S4-WDPROFIL Extension module airfoil editor incl. HPGL-export 95,00 114,00 

8S4-WD-S4PRO Extension module milling and DXF for the export of STEP-FOUR milling files (SMF) and DXF-files into STEP-FOUR milling software V3/4 145,00 174,00 

8S4-WD-S4CUT Extension module cutting for the export of STEP-FOUR cutting files (SWF) into STEP-FOUR cutting software V3 120,00 144,00 

90STSNGRUNDP 

Wing Cutting Machines PC-CUT Standard working area 320 x 560 x 300-1400 mm 

Wing Cutting Basic Package - kit incl. SF-C2 motor control unit, wing cutting software V1.66 2.130,00 2.556,00 

90STSNKOMPPA Wing Cutting Complete Package - as Basic Package plus cutting transformer 2.465,00 2.958,00 

90STSNPROFIP Wing Cutting Professional Package - as Complete Package plus professional cutting software V4 Pro 3.125,00 3.750,00 

90CUT1000KPA 

PC-CUT 1000 Complete Package, assembled portal Professional units, incl. Cutting motor Machine control unit, PC-CUT cutting working transformer, area cutting 1000 x software 1000 x 300-1400 V4 Pro, incl. mm electronic wire tensioning 

system and supporting base 11.200,00 13.440,00 

98-DREHT-CUT Turntable with software extension (only for PC-CUT 1000) 2.540,00 3.048,00 

7D-DREHT-MON Assembly of turntable 210,00 252,00 

Components and Accessories for Cutting machines 


8SW-CUT--V1X Wing cutting software V1.66 (not possible with external systems) 110,00 132,00 

8SW-UPDSN300 Update of V2 to cutting software Version 3 Pro 102,00 122,40 

8SWSNUPDV400 Update of V3 to cutting software Version 4 Pro 100,00 120,00 

8SWSNX-LT400 Cutting software V4 LT 295,00 354,00 

8SWSNUPDLT00 Update of V4LT to V4 Pro 490,00 588,00 

8SWSNPR4-X00 Cutting software V4 Pro 753,00 903,60 

8SWSNPR4M100 Extension module 1 "Drawing and Object Manipulation" (only available with V4 Pro) 90,00 108,00 

8SWSNPR4M200 Extension module 2 "Turntable control" 370,00 444,00 

8SW-DONGLE00 LPT-software protection plug to prepare data on external PC (max. 3 per software licence) 30,00 36,00 

8SW-DONG-USB USB-software protection plug to prepare data on external PC (max. 3 per software licence) 55,00 66,00 

8SW-DONGLF00 Dongle to control external systems (sold only with a software licence) 50,00 60,00 

8SW-IF-PROFI Interface to control external systems incl. current reduction (sold only with a software licence) 136,00 163,20 

9285400420ST Cutting transformer for software-controlled cutting temperature 410,00 492,00 

7VW-06-KONFI Replacement wire, ready made 25,00 30,00 


Terms Liefer-and und conditions: Zahlungsbedingungen: We deliver according Wir liefern to the zu den general allgemeinen conditions Lieferbedingungen of the Austrian Electro- der Elektro- and Electronic und Elektronikindustrie Industry. Prices Österreichs. are net, ex Die factory, Preise without verstehen taxes, sich insurance, 

customs exklusive and Versandkosten. shipping charges. Die Lieferung Payment erfolgt before gegen delivery. Vorauskasse. After written Bei order Zahlung you receive gegen an Vorauskasse order confirmation erhalten indicating Sie nach the schriftlicher expected Bestellung date of delivery eine Auftragsbestätigung 

and the amount to pay. 

This mit voraussichtlichem amount has to be paid Liefertermin by check, und money dem zu order, bezahlenden cashier’s check Betrag. or Dieser credit Betrag transfer. ist Time vor Lieferung of delivery von is approx. Ihnen zu 2 bezahlen weeks after (per receipt Verrechnungsscheck of order. Previous oder price Überweisung). 

lists are 

obsolete. Die Lieferzeit Terms beträgt and conditions ca. 2 Wochen are subject ab Auftragseingang. to correction and Bisherige change Preislisten without notice. verlieren hiermit Ihre Gültigkeit. Irrtümer und Änderungen vorbehalten. 

Prices incl. 20% VAT only for EU countries. 

sender: 

company __________________________________________________________ 

name _____________________________________________________________ payment o banking transfer before delivery 

address ___________________________________________________________ o credit card (VISA/Mastercard) 

ZIP ___________ city ________________________________________________ 

phone __________________________ fax ______________________________ 

E-mail: ____________________________________________________________ 

Internet:___________________________________________________________ 

VAT-number:_______________________________________________________ 

Bank details: Oberbank Itzling, routing code 15090, account no. 331-0060/07, IBAN: AT941509000331006007, BIC: OBKLAT2LSAL

STEP-FOUR GmbH. Bayernstraße 77 5071 Wals-Siezenheim ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?