2 - ClamSITel

FlyCam/Pilot-1 

Beginners/Parkflyers 

Telemaster 

Warbirds/EDF Jets 

Aerobatic 

Scale Flight 

Glow/Pylon/Sailplanes 

Helicopters 

Spektrum 

Axi Motors 

Atlas Motors/ESC’s 

Brushless Motors/ESC’s 

Thunder Power/Chargers 

Accessories 

Boats/Accessories 

Catalog 52 Fall/Winter 2009 

Since 1964, Hobby Lobby has offered quality products supported by outstanding 

service to our friends and customers. Our relationships and our dedication to finding and 

selling the very best airplanes, helicopters, and boats has been the key to our success in 

the past, and will continue to be our focus in the future. We remain committed to 

bringing you products with the legendary Hobby Lobby quality. We appreciate your 

business and welcome your suggestions and ideas about how we can continue to offer 

you the best stuff in the business. 

SPECIAL OFFER: this offer can’t be combined with 

any other promotions, but if you call now or visit our 

web site and use this promotion code, you’ll get a 10% 

discount on any in-stock item: CAT5210 Offer ends 12/31/2009 

New products arrive daily on our web site: 

www.hobby-lobby.com 

Phone Hours: 

Monday-Friday: 

8:00 AM to 6:00 PM 

Saturday: 10:00 AM to 5:00 PM 

(Central Standard Time) 

(866) 512-1444 

Visit our newly remodeled and greatly expanded retail store and destination hobby shop in 

beautiful Brentwood, Tennessee. Just off the freeway, we are located at 5614 Franklin Pike Circle. 

Take advantage of our permanent rock crawling course, new outdoor race track and spacious 

lounge for birthday parties or special events. The local phone number is (615) 373-1444. 

Find a dealer near you 

To find quality Hobby Lobby products closer to home, visit one of our dealers in your area. We 

support local hobby shops (well, we ARE a local hobby shop). A list of our dealers is constantly 

updated on our web site. 

Cover Photo: 1/4 Scale WACO YKS-6 at NEAT Fair 2009 by Paul Osinski 

2 

FPV2400 "Pilot View FPV 2400" First Person Video Camera ................................................ $579.99 

PilotViewFPV offers a breakthrough in the way you fly radio controlled aircraft. With this system you will be flying from the 

cockpit of your own model! Have you ever dreamed of climbing into the cockpit with the Blue Angels Well, now you can! The 

PilotViewFPV system was designed for use in radio controlled model aircraft, but that is only the beginning as far as possible 

uses. PilotViewFPV may be used in radio controlled cars and boats, and helium balloons and kites present exciting possibilities. 

Extreme sports participants in skydiving, snowboarding, and mountain biking can now share their experiences real time with 

friends and family! The future is here now.

www.hobby-lobby.com • Order Online 24/7 3

AA1130 Acme "FlyCamOne2" Micro Video Camera .... $79.99 

Version-2: 3" x 1-1/2" x 1/2" (camera only), 1 oz. Video camera 

includes audio, still photos, a voice recorder, USB drive, and a 

Webcam. Unit is small enough to mount on just about any model 

airplane, small parkflyers, RC cars, trains, skate boards, or even a 

kite. Can be remotely activated using an additional servo. Videos are 

recorded with a resolution of 640x480 for clear playback, complete 

with sound, and 1280x1024 pixels for still photos. Camera lens 

rotates 90 degrees so you can take photos or video from multiple 

angles. Built-in rechargeable 200 mAh Li-Ion battery that charges via 

the USB port on your computer in about 1 to 1-1/2 hours. For video 

and audio-recordings, FlyCamOne2 requires an SD memory card (not 

included). With a 2GB SD card (not included) the video recording time is about 30 

minutes. Webcam use requires the included software and USB cable. No software required for all other uses! You can 

edit and compress the .avi video files using Windows Movie Maker, included with Windows XP SP2 and Windows Vista. 

Check Out Actual Flight Videos 


AA2003 Acme Head Mounted 

Camera Holder ..................................... $13.99 

Elastic adjustable headband that securely holds 

the FlyCamOne2 for hands free use. Great for 

filming while Biking, Running, Skateboarding, 

Bungee Jumping, Sky Diving, just about any 

place where hands free recording would be the 

safe alternative. Adjusts to fit your head or 

helmet. Can be used with or without the 

eXtreme battery pack. 

AA2004 Acme Waterproof Dive Box .. $27.99 

2-1/4" x 4-1/4" x 1-3/8". Clear plastic waterproof 

box with silicone seals. Protects FlyCamOne2 

up to a depth of approximately 6 feet. Camera 

must be turned on prior to inserting in case, but 

the camera start/stop controls are accessible 

from outside the box. Suitable for use with or 

without the eXtreme battery pack. 

AA2009 Acme eXtreme Power Battery Pack, 

1000 mAh ............................................ $44.99 

1-1/2" x 2-5/8" x 7/16", 1000 mAh auxiliary 

battery pack extends the recording time by as 

much as 2-1/2 hours. Snaps in place on the 

camera, charges with the mini USB plug that 

came with your FlyCamOne2. 

Pan FlyCamOne2's lens during flight 

AA2011 Acme Baseplate with Servo .......... $24.99 

Replaces the stock mounting plate for your 

FlyCamOne2 and allows you to pan the head of the 

camera up to 90 degrees during flight. Plug the servo 

into a spare proportional channel on your receiver. 

Use with the remote receiver cable (AA2013) to start 

and stop recordings in flight. 

Recharge your FlyCamOne2 in your car 

AA2014 Acme Car Charger Adapter .......... $12.99 

Adapter plugs into you car's 12V power port; connect 

to your FlyCamOne2 to recharge at the field. 

Output is 500 mAh output. 

Control your FlyCamOne2 from 

your transmitter 

AA2013 Acme Receiver Control Cable ...... $15.99 

Plug one end into the camera mounting plate and the 

other into an open channel on your radio receiver. 

Allows you to remotely trigger FlyCam while flying. 

AA1220 2 GB SD Memory Card ................. $19.99 

Provides about 30 minutes of video recording. 

4 

Your R/C Superstore • (866) 512-1444

The FCO3 Core Set (FC3000) includes the video recorder, 2” 

video screen and camera mounting plate. Now you can view 

your recordings directly on the 2” TFT screen without the need 

for additional equipment. The screen is removed for flight and 

replaced by the mounting plate. With the addition of the FCO3 

Transmitter Set (FC3002), the screen is replaced by the 2.4 

GHz transmitter module; now the camera sends the video to the 

receiver that is connected to the screen. The camera is still 

recording to the SD card as well as sending live video footage 

to the screen on the ground. In the near future, the receiver 

module will be able to connect to FCO3 V-Eyes (FC3004) for a 

bird’s eye view, in real time, of the video stream from your 

model. The FCO3 GPS Module (FC3007 - coming soon) will 

send information on altitude, speed and direction during flight. 

With a receiver that has 3 additional free channels, full head 

tracking will be possible (pan, tilt, start/stop). The pan and tilt 

functions are built into the camera and do not require additional 

servos. The functions Pan, Tilt, and On/Off can be controlled on 

the ground by the 868 MHz transmitter/receiver FCO LinX 

(FC3005) without using the model’s transmitter. 

Just 

$139.99 

Core Set 

Check Out Actual Flight Videos at 


2.4 GHz Transmitter and Receiver for FCO3 

FC3002 FlyCamOne3 2.4 GHz Transmitter Set .................. $99.99 

Transmitter Module: 2-3/8” x 2” x 7/8”, 40 grams, 550 mAh Lipo, 2.4 

GHz, 4 individually selectable channels, 10mW power. Attaches to the 

camera module to transmit video to the receiver module on the 

ground. The screen that you removed from the camera now attaches 

to the receiver module for viewing. The camera records to the SD 

card at the same time as the signal is being transmitted to the ground 

receiver. Includes the Receiver Module: 3-7/8” x 2” x 5/8”, 1000 mAh 

Lipo battery, 2.4 GHz, 4 channels. Has a 3.5mm video out A/V socket. 

When using the Transmitter Set, your aircraft radio system cannot be 

on 2.4 GHz. 

Airborne Video Camera with viewing screen 

and mounting bracket 

FC3000 FlyCamOne3 Core Set ................................. $139.99 

Camera Module: 3-7/8” x 2” x 5/8”, 2.2 oz. (62 grams) including 

mounting plate, 500 mAh Lipo, VGA resolution, 28 FPS, 2 internal step 

motors for Pan and Tilt via separate cable, Motion detection for automatic 

recording, requires a Micro SD card with a minimum of 4MB 

writing speed up to 8 GB storage. 

First Person Video Goggles 

for FCO3 with built-in head 

tracking 

FC3004 FlyCamOne3 V-Eyes 

Video Goggles ............... $299.99 

VGA resolution 640x480 with builtin 

head tracking sensors. 

Control FlyCamOne3 Pan, Tilt 

and Shutter release from your 

transmitter 

Control your FCO3 

without your model transmitter 

FC3005 FlyCamOne3 LinX .. $29.99 

868 MHz Transmitter/Receiver allows 

you to control the Pan, Tilt and 

Recording On/Off functions without 

using your models transmitter. 

FC3009 FlyCamOne3 Receiver Cable 

.................................................... $39.99 

Requires up to 3 additional channels on 

your radio to control all of the functions. 

Can use 2 channels to control Pan and 

Tilt. Cable plugs into the camera module 

and up to 3 open channels on your 

receiver. 


The Golden Age of Aviation produced some of the most attractive airplanes ever made. 

The period between the end of WW1 and the beginning of WW2 saw a level of aviation excitement in the United 

States that has never been surpassed. This was a time where access to airports was easy and a little elbow grease 

could earn you some flying time. Airplanes of the golden age and some from shortly after that period represent 

the work of some of the most famous names in aviation. Walter Beech, Clyde Cessna and Lloyd Stearman were all 

part of the Travel Air Manufacturing Co., later each formed companies that bore their names. C.G. Taylor and 

William Piper built airplanes together and also produced a great number of elegant machines under their own 

names. The influence on aviation of these golden age pioneers is hard to overemphasize. 

Join us in tribute, when you choose the 1/8 scale parkflyer series or the 1/4 scale model. Reward yourself with 

true-to-scale outlines and laser cut, lightweight, highly accurate construction. The Pilot-1 aircraft line is all about 

attention to detail. Designed to bring classic golden age looks, great flying qualities and something unique to the 

flying field, we give wings to the dream. 

Our new lineup of great flying planes 

NEW! Classic Civilian aircraft from Pilot-1 

Radio ___________________ 

SPM5500 Spektrum DX5e Transmitter, 

AR500 Receiver, no Servos .............. $99.99 

Four - HTS055 Hitec HS-55 Servos 

@ $13.99 ea. ...................................... $55.96 

Two - HT0097 Hitec 12" Aileron Extensions 

@ $5.99 ea. ........................................ $11.98 

Motor, Prop _______________ 

PM221716 AXI Gold 2217/16 OUTRUNNER 

Motor ................................................... $74.99 

PM22002 Radial Mount Set for AXI 2217 

Series ................................................... $14.99 

P09060SF APC 9x6 Prop .................... $2.70 

Motor Controller ____________ 

JAP18 Jeti ADVANCE Pro 18 Amp Brushless 

Controller ............................................ $66.99 

Battery __________________ 

TP21003SPL2 3-Cell 11.1V 2100mAh “Pro 

Lite V2” 

20C LiPoly Pack ................................. $47.99 

Charger _________________ 

SRC506 iC6 LiPlus Intelligent Digital 

Balance Charger ................................. $75.99 

PLT812 Pilot-1 "PA-12" 1/8 Scale ARF ...................................................... $139.99 

53-1/4" wingspan, 39-1/2" long, 360 sq. in. wing area, 34 oz. flying weight. The baby brother to our 1/4 scale PA-12, half the size but 

retains the fun and great scale looks. All laser cut balsa and plywood construction, pre-built and pre-decorated, can be assembled and 

ready-to-fly in a matter of hours. Covered in genuine Oracover for great looks now and in the future. Step-by-step photo illustrated 

instructions will guide even the relative novice through the build process to a successful conclusion. While not suitable for the complete 

novice, the little PA-12 is a very easy to fly airplane. It does not exhibit any bad tendencies and is totally predictable in flight 

performance. Flight times of 15 minutes plus are the norm. While not an aerobatic airplane, the PA-12 is capable of loops and rolls and 

inverted flight (not something you would try in a full scale one). Includes pre-bent and assembled landing gear, fiberglass cowl, 

steerable tail wheel, windshield and side glass, wing struts, wheels and hardware pack. For 4-channels: Ailerons (2 channels), Elevator, 

Rudder and Throttle. A radio with end point, exponential, and rudder mixing is recommended. 

6 


Nearly 6 foot wingspan Piper Super Cruiser 

for glow or electric 

Pilot-1 Airplanes 

PLT612 Pilot-1 “PA-12” 1/6 Scale ARF .......................................................................... $199.99 

Radio ___________________ 

SPM6600 Spekrtum DX6i Transmitter 

6-Channel Receiver, no Servos ...... $179.99 

Four-HTS0422 Hitec HS-422 Servos @ 

$12.49 ea. ........................................... $49.96 

Two - HT0605 24" HD Servo Extensions 

@ $8.89 ea. ......................................... $17.78 

Motor, Prop _______________ 


Motor ................................................... $99.99 

PM282002 AXI RMS for 2820/2826 Series 

Motors ................................................. $16.99 

PE12060E APC 20x12 Wide Electric Prop .. 

.............................................................. $13.90 



Controller ........................ $76.99 

MJ21031 Gold Connectors, 3.4mm, 3 sets 

..................................................................$8.99 

Battery __________________ 


Lite V2” 20C LiPoly Pack ................... $79.99 

DEA1300 Deans Ultra Plug Connectors, 

pair ......................................................... $3.50 

Charger _________________ 

SRC506 IC6 Balance Charger for 1-6 LiPoly 

Cells ..................................................... $75.99 

71" wingspan, 45" long, 711 sq. in. wing area, 80 oz. flying weight. All laser cut balsa and plywood construction, pre-built and pre-decorated, can be assembled and readyto-fly 

in a couple of evenings. Covered in genuine Oracover for great looks now and in the future. Step-by-step photo illustrated instructions will guide even the relative novice 

through the build process to a successful conclusion. Designed as an electric model; the 1/6th scale PA-12 is suitable for conversion to a glow motor. A .32 2-cycle or a .40 

4-cycle are appropriate sizes. While not suitable for the complete novice, the 1/6th scale PA-12 is an easy to fly airplane. It does not exhibit any bad tendencies and is 

totally predictable in flight performance. Flight times of 15 minutes plus are the norm. While not an aerobatic airplane, the PA-12 is capable of loops and rolls and inverted 

flight (not something you would try in a full scale one). Includes pre-bent and assembled landing gear, fiberglass cowl, steerable tail wheel, windshield and side glass, wing 

struts and jury struts with scale fairings, wheels and hardware pack. For 4-channels: Ailerons (2 channels), Elevator, Rudder and Throttle. A radio with end point, 

exponential, and rudder mixing is recommended. 

For those who love Cubs but want one a little different 

PLT412 Pilot-1 “PA-12” 1/4 Scale ARF ................................................... $529.99 

106-3/8" wingspan, 67" long (without spinner), 1581 sq. in. wing area, 15-1/2 pounds 

(electric version). All built up conventional balsa and plywood construction with the 

emphasis on scale looks and light weight. Wings have scale rib spacing and are 

pre-built and covered. Scale wing struts and jury struts are included as well as the 

scale covers for the ends of the struts. The cowl is a pre-finished fiberglass unit with 

hinge and panel lines molded in. All covering is genuine Oracover beautifully 

pre-installed. All flying surfaces are pre-slotted for the included hinges. Extensive 

hardware pack with quality clevises and control horns provided. Can be built either as 

an electric model or with a gas engine. It doesn't need a lot of power to fly beautifully. 

Ours is powered by an AXI 5320/28 on only 8-cells and flies for 15-25 minutes on 5000 

mAh. Wings are removable for transport. The big PA-12 has all the docile flight 

character that makes Cubs so popular. The ground handling is solid and its presence 

in the air is uncanny. On final approach it's easy to mistake it for its full size brother. 

Radio ___________________ 

SPM2710 Spektrum DX7 DSM2 7-Ch. Radio, 

AR7000 Rx., 4 DS-821 Servos ......... $349.99 


@ $8.89 ea. ......................................... $17.78 

DUR65060 Duralite Voltage Regulator 

w/Failsafe Switch, 6V ......................... $61.99 

Motor, Prop _______________ 


Motor ................................................. $249.99 

PE2012W APC 20x12 Wide Electric Prop .. 

.............................................................. $13.90 


SPIN77 Jeti SPIN 77 Amp Opto ....... $214.99 

SPINBOX Jeti "SPIN BOX" Programming 

Control ................................................ $39.99 

Battery __________________ 

Two - TP50004SPL2 4-Cell 14.8V 5000mAh 

“Pro Lite V2” 20C LiPoly Pack 

@ $149.99 ea. ....................................$299.98 

DEA7002 Series Module w/Deans Ultra 

Connectors .......................................... $12.99 

Charger _________________ 


Balance Charger ................................. $75.99 


Classic Civilian aircraft from Pilot-1 


Radio ___________________ 

SPM5500 Spektrum DX5e Transmitter, AR500 

Receiver, no Servos .............. $99.99 

Four - HTS055 Hitec HS-55 Servos Sub Micro 

Servos@ $13.99 ea. ................. $55.96 


@ $5.99 ............................................... $11.98 

Motor, Prop _______________ 


Motor ................................................... $89.99 


Series ................................................... $14.99 

P09060SF APC 9x6 Prop ..................... $2.40 



Controller ........................................... $66.99 

Battery __________________ 



Charger _________________ 


Cells ...................................................... $75.99 

PLT800 Pilot-1 “Champ” 1/8 Scale ARF ............................................... $129.99 

52" wingspan, 32" long, 362 sq. in. wing area, 34 oz. flying weight. All laser cut built-up 

wood construction with true scale outline and proportions. A contemporary of the Piper 

Cub; the Champ was its biggest competitor and in many ways its superior. Like its full 

scale counterpart, the 1/8 scale Champ is a joy to fly, easy and relaxed. Shoot touchand-go’s, 

cruise around or do some lazy aerobatics, it's all in a day's work with the 

Champ. The model comes with all main components pre-built and pre-covered with all 

hinges pre-slotted and ready to glue. Landing gear is pre-bent and ready to install. 

Fiberglass cowl is pre-finished to match the color of the airplane. Complete step-by-step 

photo illustrated instructions assure that even a novice builder will be successful. 

Assembly will take about 6-8 hours. For 4-channel control: Ailerons (2 servos), Elevator, 

Rudder and Throttle. 

Golden Age style in a modern laser-cut ARF 

PLT400 Pilot-1 “Champ” 1/4 Scale ARF ................................................... $529.99 

105" wingspan, 65" long, 1542 sq. in. wing area, ready to fly weight is 15-1/2 pounds 

(electric). With over 10,000 Champs built between 1944-1951 it was one of civil 

aviations great hits. Thousands of men and women learned to fly in a Champ and 

came to love it's easy flying characteristics. Faithful to its roots the Pilot-1 Quarter 

Scale Champ is an easy to fly, easy to fall in love with model. Construction is all built 

up laser cut wood. All outlines are scale and the wing has scale wing rib spacing. The 

airplane can be built with electric power or as a 1.20 glow or 23cc gas model. With 

almost 11 sq. ft. of wing area, the Champ has a light wing loading and very good manners, 

from taxi out to touch down. The entire airframe is covered in genuine Oracover. 

Wings and struts are easily removed for transport and storage. Cowl is epoxy 

fiberglass, pre-painted to match the covering. Battery access is through a hatch on the 

underside of the nose; landing gear is pre-assembled heavy-duty wire unit, ready to 

bolt into place. Assembly requires 12-16 hours. As an electric model the Champ 

requires 4 standard size servos; add one more for a gas or glow powered version. For 

4-channels: Aileron (2 servos), Elevator, Rudder and Throttle. 

Radio ___________________ 


AR7000 Rx., 4 DS-821 Servos ......... $349.99 


w/Failsafe Switch, 6V ......................... $61.99 


@ $8.89 ea. ......................................... $17.78 

Motor, Prop _______________ 


Motor ................................................. $249.99 

PE2012W APC 20x12 Wide Electric Prop .. 

.............................................................. $13.90 


SPIN77 Jeti SPIN 77 Amp Opto ....... $214.99 

SPINBOX Jeti "SPIN BOX" Programming 

Control ................................................ $39.99 

Battery __________________ 

Two -TP50004SPL2 4-Cell 14.8V 5000mAh 

“Pro Lite V2” 20C LiPoly Pack @ $149.99 ea. 

....................................................... $299.98 

DEA7002 Series Module w/Deans Ultra 

Connectors .......................................... $12.99 

Charger _________________ 


Cells .................................................. $75.99 

8 


Golden Age Classic, easy to build, transport and fly 

Radio ____________________ 

SPM6600 Spekrtum DX6i Transmitter 

6-Channel Receiver, no Servos ...... $179.99 


@ $13.99 ea. ....................................... $55.96 

Two - HT0097 Hitec 12" Aileron Extension 

@ $5.99 ea. .......................................... $11.98 

Motor, Prop ________________ 


Motor ................................................... $74.99 


Series ................................................... $14.99 

PE10070E 10x7E Thin Electric Prop ... $2.70 

Motor Controller _____________ 


Controller ........................................... $99.99 

Battery __________________ 

TP21003SPL2 Pro Lite V2 3 Cell 2100 mAh 

11.1V 20C LiPoly Pack ....................... $47.99 

Charger __________________ 


Balance Charger ................................ $75.99 

PLT81081 Pilot-1 Stinson 108 Blue/Cream 1/8 Scale ARF ........ $149.99 

PLT81082 Pilot-1 Stinson 108 Red/Cream 1/8 Scale ARF ......... $149.99 

50-3/4" wingspan, 38-1/2" long, 345 sq. in. wing area, 41-1/2 oz. flying weight (with 7.4 oz. battery). True to scale classic for those who love elegant 

design and gentle handling. All laser-cut balsa and ply construction accurately pre-assembled and pre-covered in genuine Oracover. 

Has attractive scale details that make this handsome aircraft stand out at the flying field. Fiberglass engine cowl with chrome-look air intake grills, and 

fiberglass wheel pants. Aluminum landing gear with airfoil covering and plastic fairings that blend to the fuselage. Pre-built and covered wing struts. 

Wings slide onto carbon wing tube and are held in position by a screw tab. Airplane can be built with either one or two 

elevator servos (2 elevator pushrods included) and uses pull-pull rudder control; each aileron has its own servo. 

The clearly written photo-illustrated instruction manual shows each assembly step and offers valuable setup information for successful flying. 

Removing the bottom hatch (no tools required) easily accesses the battery. Flight times in excess of 15 minutes are possible. Requires a 4-channel 

radio system; we recommend a computer radio system with end point adjustments and the ability to have rudder-aileron mixing and differential aileron 

adjustments. 

Classic scale model for gas or electric power 


PLT4108B Pilot-1 27% Scale Stinson 108 Blue ARF ...................... $899.99 

PLT4108R Pilot-1 27% Scale Stinson 108 Red ARF ....................... $899.99 

Radio ____________________ 


AR7000 Rx, 4-DS821 Digital Servos .. $349.99 

Three - HTS0635 Hitec HS-635 HB Hi Torque 

Servos @ $27.99 ea. .......................... $83.97 

Four - HT0605 24" Aileron Extension 

w/Gold Pins@ $8.89 ea. .................... $35.56 

Three - HT0604 12" Aileron Extension 

w/Gold Pins @ $6.69 ea. ........................ $20.07 

Motor, Motor Mount, Prop _______ 

PM534518 Model Motors AXI Gold 5345/18 

OUTRUNNER Motor ........................ $285.99 

AMM111 Aluminum Motor Mount System for 

OUTRUNNER Brushless Motors, 40 pcs 

.............................................................. $17.99 

PE2112W APC 21x12 Wide Electric Prop 

............................................................ $13.90 

Motor Controller,Voltage Regulator _ 

SPIN99 Jeti SPIN 99 ...................... $298.99 

SPINBOX Jeti SPIN BOX ................. $39.99 

DUR65060 Duralite Voltage Regulator with 

Failsafe Switch, 6V .......................... $61.99 

Battery ___________________ 

Two - TP50005SPL2 5-Cell 18.5V 5000mAh 

“Pro Lite V2” 20C LiPoly Pack@ $184.99 ea. 

......................................................... $369.98 

Charger __________________ 

TME300 TME "Xtrema" Lithium Charger & 

Wattmeter .............................................. $189.99 

108-1/2" wingspan, 81" long, 1680 sq. in. wing area, 19-1/2 lbs. flying weight. The Stinson is one of the most attractive civilian aircraft of the post WW2 

period. It could carry 4 people and do it in style. Our version of this airplane is all built-up conventional wood construction from precision laser cut parts. 

Each model is expertly built by a single technician dedicated to producing an outstanding model. The covering is genuine Oracover, known world-wide 

for its superior performance. The colors are original factory stock paint schemes, either red over cream or blue over cream. In either case the epoxy 

glass cowl and wheel pants are painted to match the covering. The landing gear is a robust all-carbon fiber unit, suitable for years of use even under 

adverse conditions. The wings have scale rib spacing and internally driven flaps. Rudder is a pull-pull system and each elevator half is individually 

driven. Access to the interior of the fuselage is provided by a large hatch in the center of the wing. Designed for gas motors of 26cc or larger, we built 

ours with a large AXI 5345 Outrunner brushless motor. Either choice provides you a model with excellent performance. With a 10 cell 5000 mAh 

battery our flight times are 10-12 minutes with reserve. The big Stinson's handling both on the ground and in the air is a total joy, very easy to fly and 

responsive. For 6-channel radio (minimum): Ailerons (2 servos), Flaps (2 servos), Elevator (2 servos), Rudder and Throttle. 


Golden Age biplane - Great looks, easy to fly 

PLT8930 Pilot-1 Waco YKS-6 1/8 Scale ARF ...... $179.99 


50" wingspan, 37" long, 624 sq. in. wing area, 43 oz. flying 

weight. There are few things more attractive than a Golden Age 

biplane and WACO created some of the best. Our Pilot-1 Waco 

YKS-6 in 1/8 scale captures the overall beauty of this airplane 

and brings it to you in an easy to assemble ARF. Precision laser cut all wood construction, 

pre-assembled and pre-covered in genuine Oracover. Much simpler to assemble 

Radio ___________________ 

SPM5500 Spektrum DX5e Transmitter, AR500 

Receiver, no Servos .......................... $99.99 

Four - HTS055 Hitec HS-55 Servos Sub Micro 

Servos@ $13.99 ea. ........................... $55.96 


@ $5.99 ea. ......................................... $11.98 

Motor, Prop _______________ 


OUTRUNNER Motor ........................... $95.99 


Series Brushless Motors .................. $16.99 

PE10070E 10x7E Thin Electric Prop .. $2.70 


SPIN22 Jeti SPIN 22 Amp Brushless Speed 

Control ................................................ $84.99 

Battery __________________ 



Charger _________________ 


Balance Charger .................................. $75.99 

than many biplanes, the Waco's upper wing attaches to the side on the fuselage and is automatically aligned. Assembly will take 6-8 hours, the 

illustrated instructions provide clear guidance. Our recommended power system provides plenty of power for quick take-offs and a great climb. 

The airplane will perform all the standard aerobatic maneuvers but is at its best flying in a scale manner, doing touch-and-go's and shooting landings. 

Flight times are 10-15 minutes. For 4-channels: Ailerons (2 servos), Elevator, Rudder and Throttle. 

Big Scale Golden Age biplane-beautiful detail, great performance 

PLT4930 Pilot-1 Waco YKS-6 1/4 Scale ARF ............. $899.99 

WACO (Weaver Aircraft Company) of Loraine, Ohio was one of 

the premier aircraft manufacturers of the Golden Age. The YKS-6 was a large cabin biplane 

with seating for 4-5 people. Its large wing area and overall light weight allowed it take off and 

land in undeveloped areas common to the US in the 1930's. Our model is of the airplane that 

is owned by the Deutsches Museum Flugwerft Schleißheim. This airplane was originally built 

as an ambulance aircraft in 1936 and spent the bulk of its service life on floats in the Alaska 

outback. Restored in 1989 the plane was later shipped to Germany and is still in flying 

condition with its original registration numbers. Our airplane has a 100” wingspan and is 74” 

long with a 2496 sq. in. wing area (that's over 17 sq. ft. of wing area). At 20-22 lbs. flying weight 

it has a low wing loading typical of a Waco. We included lots of scale detail to bring the model 

to life: corrugated ailerons, working doors, scale aluminum wheel hubs, Airfoiled aluminum wing 

struts, scale rib spacing and scale outline and colors. All laser cut plywood construction, the 

airplane comes in 2 large boxes with a great deal of the tough work already done. The main 

parts are pre-assembled and covered with the graphics pre-applied. The wings are easily 

removed without disassembly; there is no rigging to deal with. Battery access is through the 

operable doors on both sides of the fuselage. Total build time is about 15-20 hours. Complete 

hardware package included. Whether built as an electric or gas model the flight performance 

is a total joy, take offs are short and climb performance is quick. The airplane will slip into a 

small field just like the original full scale one did. Our recommended electrical setup provides 

much greater than scale performance, we rarely get above half throttle. Flight duration with a 

5000mAh battery is well over 10 minutes with reserve. Airplane can be flown with 10 or 12 lipoly 

cells and balances with the batteries inside the fuselage. 

Radio _______________ 

SPM2710 Spektrum DX7 DSM2 

7-Ch., AR7000 Rx, 4 DS-821 

Servos .................................... $349.99 

HTS0635 Hitec HS-635 HB Hi-Torque 

Servo ...................................... $27.99 

Two - HT0604 12" Aileron Extension 

@ $6.69 ea. ............................ $13.38 

Two - HT0605 24" Aileron Extension 

@ $8.89 ea. ............................ $17.78 


with Failsafe Switch, 6V ........... $61.99 

TP21003SPL2 3-Cell 11.1V 2100mAh 


.................................................... $47.99 

Motor, Prop ___________ 

PM534516 Model Motors AXI Gold 

5345/16 OUTRUNNER .... $285.99 

PE2112W APC 21x12 Wide Electric 

Prop ........................................ $13.90 

Motor Controller ________ 

SPIN99 Jeti SPIN 99 Amp Opto 

Brushless Controller ........... $298.99 

SPINBOX Jeti SPIN BOX 

Programming Control ............ $39.99 

Battery ______________ 

Two -TP50006SPL2 6-Cell 22.2V 

5000mAh “Pro Lite V2” 20C LiPoly 

Pack@ $219.99 ea. .............. $439.99 

DEA7002 Series Module with Deans 

Ultra ...................................... $12.99 

Charger _____________ 

SRC506 IC6 Balance Charger for 1-6 

LiPoly Cells .......................... $75.99 

10 


Golden Age Racer that's fun to fly 


Radio ___________________ 


AR500 Receiver, no Servos .............. $99.99 

Four - HTS055 Hitec HS-55 Servos Sub 

Micro Servos@ $13.99 ea. ................ $55.96 


@ $5.99 ea. ......................................... $11.98 

Motor, Prop _______________ 


Motor ................................................... $89.99 


Series .................................................. $14.99 

PE10070E APC 10 X 7 "E" Prop ......... $2.70 



Controller ....................................... $66.99 

Battery 

__________________ 


“Pro Lite V2” 20C LiPoly Pack ........... $47.99 

_________________ 

Charger 


Balance Charger .............................. $75.99 

PLT8044 Pilot-1 “Wedell-Williams Model 44” 1/8 Scale ARF .................. $149.99 

In the late 1920's and early 30's air racing was huge in the United States. Racing pioneers like Granville, Rider, Laird, Howard and Curtiss were 

familiar names, but there was no one who had more success than Jimmy Wedell and his Wedell-Williams racers, particularly the Model 44. In the 

year's 1931-34, Jimmy Wedell's Model 44 placed in the top three in the Thompson Trophy Race 7 times, including 2 wins. 

40" wingspan, 31" long, 325 sq. in. wing area, 35 oz. flying weight. Our model 44 captures the look and excitement of this classic airplane in a 

modern laser cut ARF. We combined racer looks with sport flyer handling for an easy to fly, easy to build airplane. Model is all laser cut balsa and 

ply construction, pre-covered in genuine Oracover. Cowl is pre-finished fiberglass, wheel pants are molded plastic. Includes flying wires, tail braces, 

pre-bent wire landing gear, steerable tail wheel and hardware. Easy access to the flight batteries under the magnetic battery hatch in the fuselage. 

Photo illustrated instructions included, assembly time approximately 8-12 hours. While not suitable for the novice, the Model 44 is an easy plane to 

fly. Anyone with some aileron airplane experience should not have any problems flying this airplane. Our recommended power system provides 

plenty of power for quick take-offs and powerful climbouts. All regular aerobatic maneuvers are easily performed with this airplane. Its light wing 

loading makes it easy to slow down for landing. For 4-channels: Ailerons (2 servos), Elevator, Rudder and Throttle. 

Teaching kids about Aviation 

Every summer the Warner Park Nature Center puts on all kinds of 

outdoor activities and learning opportunities for the local kids of 

Nashville. Parents can sign their kids up for all kinds of eagerly 

awaited programs that last all summer long. June 24th was Astronomy, 

Space, and Model Aviation Day. Hobby Lobby and the Edwin Warner 

Aviators have participated in this program for years. This year the 

weather was perfect and there were 92 kids in attendance. The kids are 

divided into several groups and then spend around half an hour or so at 

thedifferent space, astronomy, and model aviation stations. At the 

modelaviation station, the kids are introduced to the basics of flight with 

a short discussion. It’s fun to see how intrigued they are. Then we 

show them what we mean with our aircraft. Mike Hines and I brought 

alongseveral of our jets and prop planes as well as the huge 12 Foot 

Telemaster ARF. Some of the kids wanted to catch a ride in it! I brought along some parachute guys and we dropped 

them out of the Telemaster several times and let the kids chase them down. They loved that! A few of the guys from 

the club brought some foamy combat planes. This was awesome! It looked liked they kit bashed several different kits 

to get a flying machine together. The kids really enjoyed watching combat and especially the crashes that followed. 

It’s really a privilege for us to be 

there to spark some interest and 

excitement about aviation in so 

many kids. If you’re in the area 

and would like more information 

about the parks program, visit 

www.friendsofwarnerparks.com. 



Terrific beginners plane--- brushless power, 2.4 GHz radio 

Powerful brushless outrunner 

motor pre-installed 

Included: 

4-Channel 2.4 

GHz 

transmitter and 

6-Channel 

receiver can be 

used in future 

airplanes or 

helicopters 

AT3307 Art-Tech Wing Dragon HL RTF with 2.4 GHz Radio ........................ $169.99 

42" wingspan, 34-1/2" long, 367 sq. in. wing area, flying weight of about 17 oz. If you want to learn 

how to fly, buy a plane that already knows how: the Wing Dragon HL. Learning to fly doesn't get 

much easier than this. Wing Dragon HL has good power and wonderful stability, the plane already 

knows how to fly. The brushless outrunner motor provides lots of thrust, it only takes a few 

seconds to climb to altitude. Reduce the power and Wing Dragon HL will cruise around for 10 minutes 

or more per charge of the 7 cell NiMH pack. Airplane comes complete with a 2.4 GHz radio 

system that is pre-installed and ready for use. This allows you to fly the Wing Dragon HL almost 

anywhere without the worry of frequency interference. Everything that you need to fly is included 

in the package: 4-channel 2.4 GHz radio transmitter and 6 channel receiver, 2 servos, brushless 

outrunner motor and controller, 7 cell NiMH battery pack, wall plug-in NiMH battery charger. 

Assembly is quick and easy and does not require any tools or glue, even the necessary 

crewdriver is included. The radio system is a 4-channel unit that gives you a lot of future flexibility. 

Easy access to 

battery 

and radio system 

NEW! Add floats to your 

Wing Dragon HL 

ATS3307F 

Float Set for Wing 

Dragon HL .... $24.99 

Spare parts for Wing Dragon HL 

ATS33071 Spare Tail Set ............................ $14.99 

Complete replacement Elevator and Rudder 

ATS33072 Spare Wing Set ......................... $29.99 

Complete replacement Wing set with dihedral brace 

ATS3307P Spare Propeller ........................... $5.99 

7” Pusher prop presses on Wing-Dragon motor 

AT3316T Spare Power Battery ................... $21.99 

7-cell, 8.4 Volt, 1000mAh NiMH pack with 

T-Connector 

Out of AA batteries 

Transmitter uses: 

Two - BATAA Packs of 4 AA 

Alkaline Cells @ $3.50 ea. ..... $7.00 

Wing Dragon HL - Always Flying 

replacement parts FREE for ONE YEAR! 

Wing Dragon HL beginner's RC airplane. The Always 

Flying Program gives you FREE replacement parts 

for ONE YEAR! 

Wing Dragon HL - Always Flying replacement parts FREE for ONE YEAR! ....................................................................... $179.99 

For the first year of flight, Hobby Lobby International will give you any part you break on your Always Flying Airplane, free of charge. 

Of course, there is a catch! We want a photo and the story behind your crash. We want to be there with you. We want to experience that 

first crater job. That means your Flight Advisor approved story is good for some FREE parts! * You pay only for shipping WHEN you tell 

us the story of the wreck, the wind gust, moving tree or rapidly rising ground surface that broke your aircraft (we know it's not your fault). 

Visit our Always Flying Section to send a photo and your interesting sob story. If you have video of the wreck, you get FREE 

SHIPPING! To get your replacement parts, all you have to do is tell everyone how it happened, call us to order your parts and email photos 

of the crash. Standard shipping charges apply unless you have video! 

12 



Nothing else to buy -- easy flyer even has radio included 

PEL4106 RCM Pelikán "Bellanca Decathlon 480" RTF ........................................................... $129.99 

40" wingspan, 29-1/2" long, 245 sq. in. wing area, 21-1/2 oz. 

flying weight. A fine airplane for a beginner to RC. Airplane has 

a large wing area that makes it easy to fly. It takes off from a 

smooth surface or with a hand launch. It's easy to land. Made 

of injection molded dense beaded foam. Assembly time is a 

few hours, most of it waiting for the glue to dry. Main landing 

gear snaps into position, tail wheel is steerable, functional lift 

struts lock into place with cotter pins. Everything is here: It 

includes 4 channel radio (only 3 channels are used - rudder, 

elevator, throttle - ailerons included but are not used), motor, 

prop, 8-cell 600 mAh 9.6V NiMH flight battery and 110V plug in 

wall charger. Spare propeller and spinner are included. 

Fuselage has servos, radio, 

speed control and motor 

pre-installed 

Easy access to flight battery 

through hatch on 

bottom 

4-channel radio with 

servo reversing on 

all channels 

PEL4107 RCM Pelikan "Waco" Biplane 

RTF ................................................ $169.99 

39" wingspan, 31" long, 503 sq. in. wing area, 24 

oz. flying weight. All molded foam Ready-To-Fly 

biplane complete with brushless OUTRUNNER 

motor and speed controller, 72 MHz 4-channel 

radio, 3 servos, propeller and spinner. A 3-cell 1300 

mAh Lithium Polymer battery and Balance Lithium 

Poly Charger are included (requires 12 volt battery 

or power supply). Airplane is pre-painted with 

decals pre-applied. Assembly requires a Phillips 

screwdriver and about and hour of time. Install 

8-AA batteries (not included) in the transmitter, 

charge your flight batteries and you are ready to fly. 

The OUTRUNNER brushless motor provides the 

power needed for aerobatic maneuvers like rolls, 

loops and inverted flight. Ailerons are on both the 

top and bottom wings for better roll control. 

Airplane has a gentle stall. Landings are slow and 

easy. Comes complete with all necessary small 

parts and instruction manual. Suitable as a first 

aileron airplane. 

Quick to build, fun to fly, assembles in about an hour 

Out of AA batteries 

Transmitter uses: 

Two - BATAA Packs of 4 AA 

Alkaline Cells @ $3.50 ea. ..... $7.00 



Beginner's dream! Easiest flying models of all! 

HLA020 "Miss 2" ARF ................................... $89.99 

Radio ______________ 

SPM5500 DX5e Full Range Transmitter, 

AR500 Receiver, no servos ......... $99.99 

Two - HTS055 Hitec HS-55 Sub Micro 

Servo @ $13.99 ea. ...................... $27.98 

Motor, Prop Adapter, Prop __ 

PS221234 Model Motors AXI Silver 

2212/34 OUTRUNNER Motor ...... $54.99 

GR605331 Graupner Prop Adapter for 

3.2mm Shaft ............................... $5.69 

P09060SF APC 9X6 Prop ............... $2.40 

Motor Controller ______ 

JEE012 Jeti ECO 12 Amp Brushless 

Controller ................................ $43.99 

Battery __________ 


“Pro Lite V2” 20C .................. $47.99 

Charger __________ 

ETC2500 Smart Charger for 1-4 

Li-Poly Cells ...................... $48.99 

BAT220 Charger Adapter, JST to 

Deans Ultra ........................... $4.99 

54" wingspan, 35" long, 395 sq. in. wing area, 27 oz. 

flying weight. Nose of airplane has been lengthened so 

airplane will balance with today's lighter lithium battery 

packs. Pre-built and pre-covered all wood airplane. 

Polyhedral wing makes Miss 2 handle smoothly and 

provides stability. Flies for over an hour as the airplane 

floats on the lightest of thermals. Includes good 

instructions and is easy to assemble. For 3-channels: 

Elevator, Rudder and Throttle. 

Versatile aileron trainer and sport flyer 

HLA2067 "Super Miss" ARF ............................ $99.99 

. 

54" wingspan, 35-1/2" long, 397 sq. in. wing area, 34 oz. flying 

weight. Super Miss is back and redesigned. Airplane is all 

balsa and plywood built-up construction. Pre-built and 

pre-covered. The wing has a low dihedral angle and strip 

ailerons. Airplane is easy to assemble and even easier to fly. 

The wing loading is as light as many sailplanes, allowing the 

airplane to slow to a walk for easy landings. Super Miss is 

overpowered; at full throttle the climb is straight up. Throttle 

back and you have the power to learn and perfect aerobatic 

maneuvers. For 4-channels: Ailerons, Elevator, Rudder and 

Throttle. 

Radio ______________ 

SPM5500 DX5e Full Range 

Transmitter, AR500 Receiver, 

no servos ............................. $99.99 

Three - HTS055 Hitec HS-55 Sub 

Micro Servo @ $13.99 ea. .. $41.97 

Motor, Prop, Spinner _____ 

AM2909 Atlas 15 Brushless 

OUTRUNNER ...................... $39.99 

PE10070E 10x7 Thin Electric 

Prop ....................................... $2.70 

GR1304/4 Graupner 38mm Spinner, 

4mm Shaft, 8mm Prop ....... $23.99 

Motor Controller ______ 

JEE025 Jeti ECO 25 Amp 

Brushless Controller ... $52.99 

Battery ____________ 


“Pro Lite V2” 20C .................. $62.99 

Charger 

ETC2500 Smart Charger for 

1-4 Li-Poly Cells ............ $48.99 

BAT220 Charger Adapter, JST 

to Deans Ultra ................. $4.99 

14 


Laser cut: builds into ultra light floater 


HLAR010 “Miss Stik” Kit .................................................................................... $34.99 

55" wingspan, 35-1/2" long, 400 sq. in. wing area, 22 

oz. flying weight. With a wing loading under 8 oz. per 

square foot, you can climb to thermal altitude in seconds, 

then float for as long as you wish. Very precise 

laser cut balsa kit designed by Tom Hunt. Written 

instructions with clear full size plans, wire main landing 

gear, molded front cowl, top quality balsa, and 

clear windshield material. Classical in design, the 

model is very easy to fly and lands slowly. A beginner 

can fly this plane with confidence. Brilliant performance 

with the power system we recommend. For 3 

channels; rudder, elevator and throttle. 

Radio _________________ 

HTR48725 Hitec "Neon 3" FM with Micro 

05S Rcvr., 2 HS-55 Servos ......... $69.99 

Motor _________________ 

PM221226 AXI 2212/26 OUTRUNNER 

Brushless Motor ......................... $79.99 

Motor Controller __________ 

JEE012 Jeti "ECO 12" 12 Amp 

Controller for Brushless Motor . $43.99 

MJ21011 Gold Connectors, 1.8mm, 

3 pair ............................................ $7.99 

BAT228 JST Connector, Female .. $2.99 

Prop/Spinner ____________ 

P10070SF APC 10x7 

Slowflyer Prop ........................... $2.70 

GR1304/3 Graupner 38mm Spinner, 3.2mm Shaft, 

8mm prop hole ... $23.99 

Battery ________________ 

TP9102SJPL2 Thunder Power 2 Cell 910 

mAh Li-Poly Pack w/JST Connector ............ $21.99 

Charger ____________ 


1-4 Li-Poly Cells ......... $48.99 

Wheels _____________ 

LYT53 "LYT" 2-1/16" Wheels, pair ............ $5.99 

The German Model Airplane industry commissioned these kits to teach 

young modelers the model airplane hobby. 

YOU get to see PERFECTION in a model airplane kit! 

GR4019 Graupner MINI 16” Handlaunch Glider ........................ $16.99 

GR4017 Graupner PITO 19” Handlaunch Glider ...................... $17.99 

GR4020 Graupner SLIPPER 21” Handlaunch Glider ................ $18.99 

These airplanes FLY extremely well. If you properly trim them for flight 

they are capable of minute and longer flights from a handlaunch. When 

you BUILD them you will be amazed that balsa and hardwood parts can 

be made as perfectly as they are in these kits. All airfoils are fully shaped, 

dihedral angles correctly cut with templates included for assembly. 

EVERYTHING — glue, sand paper, sanding block, ballast, copper wire 

for control surface trim, stick-on decals — is included in the packages. 

Punchout jigs are included so everything will be accurately assembled. 

The instructions are in 3 languages, German, English, French. The plan 

and instructions are accurate and easy to follow. If you are a teacher you 

may be interested in buying them for class instruction in model building 

and aerodynamics —call us — we have prices for schools. If you are 

a father or grandfather and want a project to interest your kids in aircraft 

modeling you’ll never find a better project than these. If you have been 

curious about high performance handlaunch gliders you’ll want to build 

these yourself. 

Specifications: MINI: 15.75” wingspan, 16.75” long, PITO: 18.9” 

wingspan, 17.92” long, SLIPPER: 21.66” wingspan, 22/84” long. 


Flies like a Giant with only 35" Wingspan 

HLA192 AeroCraft "Micro-Telemaster" 

All Wood Kit ............................ $28.99 

35-1/2" wingspan, 24" long, 192 sq. in. wing 

area, 6-8 oz. flying weight, 6 oz. per sq. ft. 

wing loading. Nothing flies like a Telemaster 

and nothing builds as easy as the 

Micro-Telemaster kit. The full-size plans and 

photo-illustrated assembly manual make 

this the best choice for building your 

airplane this weekend. 

All Laser-cut parts 

and premium grade 

balsa wood assure 

easy assembly. Wing 

leading edges are factory milled to shape. Like its big 

brothers, Micro-Telemaster flies with authority using the 

recommended power system. Controls are 

rudder, elevator and throttle. 

Wood Kit 

Radio, Servos __________ 


AR500 Receiver, no Servos .... $99.99 

SPM6300 AR6300 Nanolite 

6-Channel DSM2 Receiver ...... $59.99 

Two-SPS060J DSP60J Programmable 

Digital Super Sub-Micro Servo @ 

$21.99 ea. ................................. $43.98 

Motor, Prop ____________ 

PM220354 AXI Gold 2203/52 

Outrunner Motor ...................... $69.99 

Parkflyer is half the size of Sr. Telemaster 

Balsa Kit 

HLA101 Hobby Lobby “Mini-Telemaster” Kit .............. $33.99 

315 sq. inches, 45” span “Mini-Telemaster” is a 48% scale model 

of the Sr. Telemaster. Has the great flying qualities of Sr. 

Telemaster but is a parkflyer. When powered as we recommend, 

the model has lots of power for short takeoffs and steep climbs, 

and it's light enough to float in for slow and easy landings.Very 

easy-to-build balsa kit includes laser-cut wing ribs and other 

parts, wire main landing gear, wire tail skid. For 3 channels: 

Rudder, Elevator and Throttle. 

P07040SF APC 7x4 Slowflyer Prop .... $2.00 



Controller ............................... $43.99 

MJ21011 1.8mm Gold Connectors, 

3 Sets ........................................ $7.99 

Battery ______________ 

TP09102SJPL2 2-Cell 7.4V 910mAh 


w/JST ...................................... $21.99 

Charger ______________ 


LiPoly or 1-8 Ni Cells ............ $39.99 

Wheels ______________ 

LYT35 "LYT" 1-3/8" Wheels, pair ........ $4.49 

Radio __________________ 

HTR48725 Hitec "Neon 3" FM with Micro 

05S Rcvr., 2 HS-55 Servos ............ $69.99 

Motor __________________ 

PS220834 Model Motors AXI Silver 

2208/34 OUTRUNNER Motor ......... $49.99 

Motor Controller ___________ 


Controller ........................................ $43.99 

Prop __________________ 

P08060SF APC 8x6 Slowflyer Prop .. $2.20 

Battery _________________ 

TP21003SPL2 Pro Lite V2 3 Cell 2100 

mAh 11.1V 20C LiPoly Pack ......... $47.99 

Charger ________________ 

ETC2030 Smart Charger ............... $39.99 

Wheels ________________ 

LYT53 “Lyt” 2-1/16” Wheels, pair .. $5.99 

16 


TELEMASTER 

NEW! Radio Ready airplane with both regular and aileron wings included 

Radio ______________ 

SPM5500 Spektrum DX5e 


no Servos ............................. $99.99 

Battery _____________ 

TP21003SPL2 Pro Lite V2 3 Cell 2100 

mAh 11.1V 20C LiPoly Pack ... $47.99 

Charger ____________ 

SRC506 IC6 Balance Charger for 

1-6 LiPoly Cells .................. $75.99 

DEA1300 Deans Ultra Plug 

connectors, Pair .................. $3.49 

HLA115 Hobby-Lobby Mini Telemaster RR w/2 Wing Sets .............................................. $189.99 

47" wingspan, 32-1/2" long, 329 sq. in. wing area, 23 oz. flying weight. Mini-Telemaster is now 

offered as a Radio Ready airplane. Two wing sets are included; begin with the regular wings 

(without ailerons) and when you want to move up to 4-channel control just switch to the included 

aileron wing set. Airplane is pre-built and pre-covered, a brushless 1300Kv outrunner motor and 30A speed 

control are pre-installed. The elevator and rudder servo are installed and ready to be plugged into the 

receiver. Nearly all the building has been done for you, what remains can be done without glue in less than an 

hour. The main landing gear is pre-bent wire and the tailwheel is steerable. When it comes to flying, 

Mini-Telemaster flies like a Telemaster: Smooth, responsive, and predictable. It still has all of the gentle 

handling and slow flight characteristics of the larger Telemaster airplanes. The difference is it can be flown in a 

much smaller area. For 3 or 4 Channels: Elevator, Rudder, Ailerons (optional) and Throttle. 

No time to build the kit Now an Almost Ready to Fly airplane 

Almost - Ready - to - Fly 

Radio 

HTR48725 Hitec "Neon 3" FM 

with Micro 05 Receiver, 2 HS-55 

Servos ............................. $69.99 

Motor, Prop Adapter, Prop 

PS220834 AXI Silver 2208/34 

OUTRUNNER Motor ........ $49.99 

PM22002 Radial Mount Set for 

AXI 22 Series Motors ..... $12.99 

P08060SF APC 8X6 Slowflyer 

Prop ................................... $2.40 

Motor Controller 


Brushless Controller ...... $39.99 

Battery 

TP21003SPL2 Pro Lite V2 3 

Cell 2100 mAh 11.1V 20C 

LiPoly Pack ..................... $47.99 

HLA114 Hobby-Lobby "Mini-Telemaster" ARF ...... $74.99 

47" wingspan, 32-1/2" long, 329 sq. in. wing area, 23 oz. 

flying weight. Up until now, if you wanted a Mini-Telemaster, 

you had to build one yourself. Not any longer. Mini-Telemaster is now offered as an ARF. Airplane 

is pre-built and covered. The hard building has been done for you. Assembly takes only about 3 

hours and consists of gluing the wing halves together, installing the tail 

parts to the fuselage and installing the radio equipment. The main 

landing gear is pre-bent wire and the tailwheel is steerable. When it 

comes to flying, Mini-Telemaster flies like a Telemaster. Smooth, 

responsive, and predictable; it still has all of the gentle handling and 

slow flight characteristics of the larger Telemaster airplanes. The difference 

is it can be flown in a much smaller area. For 3-Channels: Elevator, 


HLA114W Main Wing with Ailerons for Mini-Telemaster ........ $31.99 

A simple direct replacement wing with strip ailerons, installs on your Mini-Telemaster with no modifications. The wing is the 

same size and area as the original wing. The dihedral has been reduced for use with ailerons. Comes in two 

panels, each pre-covered with the ailerons pre-hinged and torque rods in place. Wing joiner must be epoxied together 

and then the wing halves must be glued together with epoxy. An aileron servo must be installed 

(HS-81 servo not included) and connected to the aileron torque rods with the included hardware. 4-Channel radio 

required for this application. Decal set included. 

Charger 


1-3 Li-Poly or 1-8 NiCd/NiMH 

Cells .................................. $39.99 

BAT221 Charger Adapter, 

JST to Speed 400 .............. $6.49 


connectors, Pair ................ $3.49 


TELEMASTER 

The world’s best glow powered trainer is MUCH BETTER as an electric --- 

More powerful and Ready-Built 

HLA110 Hobby-Lobby 

6 Foot "Telemaster Electro ARF" ........ $159.99 

73-1/4” wingspan, 53-1/2” long, 848 sq. in. wing 

area, 88 oz. flying weight, 15 oz. per sq. ft. wing 

loading. Hundreds of modelers have had their first 

successful flying experience with a Telemaster, and 

many beginners have successfully flown a 

Telemaster 40 without assistance. With Telemaster 

Electro, all the things that made Telemaster 40 

great are there but now in Almost Ready to Fly 

form. It’s set up for AXI OUTRUNNER power (more 

powerful and no temperamental and messy glow 

motor to deal with). We wish that we could build a 

model this well; the construction is as though you 

had a Telemaster kit custom built for you. We 

insisted the plane be built up with stick longerons, 

not the light ply sheeting you find in other ARF 

planes. The motor mount is installed, ready for an 

AXI 2826/12 motor with a radial mount; the battery 

box is installed, ready for either 8-10 cell NiCad or 

NiMh batteries or a 3 cell Lipo pack. The access 

hatch for the battery is built and the magnetic latch 

pre-installed.Photo-illustrated instructions are 

included showing step-by-step how the model is 

assembled, including the addition of optional flaps 

(servo location in wing is pre-installed). For 4 

channels: Ailerons (2 servos), Elevator, Rudder and 

Throttle. Flaps (2 servos) are optional. 

Pre-installed battery 

tray with adjustable 

battery stop for LiPoly 

or NiMH packs 

Pre-installed motor mount 

ready for AXI motor and 

radial mount, Jeti speed 

control mounts in cooling 

airflow 

Sturdy aluminum landing 

gear mounts to 

pre-installed blind nuts 

Precision 

laser cut ARF, 

we wish we 

could build 

this well. 

Optional flaps 

easy to install 

Easy battery access 

through pre-built 

hatch with magnetic 

latch, no need to 

remove the wing to 

change batteries 

Radio ______________ 



no Servos .......................... $99.99 

Four - HTS0322S Hitec HS-322 

Deluxe Standard Servo 

@ $9.99 ea. ........................ $39.96 

Motor, Prop ___________ 

PM282612 “AXI” OUTRUNNER 

Brushless Motor .............. $112.99 

PM282002 Radial Mount for 

2820/2826 Series Motors .. $16.99 

PE13080E 13x8E Thin Electric 

Prop ...................................... $4.60 


JAP40 Jeti ADVANCE Pro 40 Amp 

Brushless Controller ........ $99.99 

Battery _____________ 

TP43503SPL2 3-Cell 11.1V 

4350mAh "Pro Lite V2” 20C 

LiPoly Pack ....................... $99.99 

Charger _____________ 

SRC506 iC6 LiPlus Intelligent 

Digital Balance Charger ... $75.99 

Here’s Everything You’ll Need 

See HLA110 Above 

HLA111 Telemaster 40 Kit ................................... $89.99 

73" wingspan, 53-1/2" long, 848 sq. in. wing area, 96 oz. flying 

weight, less than 16 oz. per sq. ft. wing loading. This is an all 

balsa and hardwood kit that takes about 40 hours to build and 

cover and install flight equipment. Hundreds of modelers have 

had their first successful flying experience with a Telemaster,and 

many beginners have successfully flown Telemaster 40 without 

assistance. The electric power system that we recommend will 

fly the airplane for over 10 minutes, with better performance -- 

quicker takeoffs, steeper climbs -- than a glow engine. The 

kit can be built as an electric powered airplane or as a .40 

powered glow plane. For 4 or 5 channels: Rudder, 

Elevator, Ailerons (2 servos), Throttle. The kit also 

includes Flaps (1 servo). The Telemaster 40 is very 

easy to land and this makes it an 

excellent airplane for a beginner. If you are a 

beginner, build it fairly well, and do some 

imaginary flights before the actual first 

flight, you will probably have no 

problems soloing Telemaster 40 on 

your first RC flight. 

18 


HUGE! No other airplane flies like the 

SENIOR TELEMASTER! 

TELEMASTER 

HLA107 Senior Telemaster Kit .............. $125.99 

95" span (almost 8 feet!) 1330 sq. in. wing area, plus 

320 sq. in. lifting stab area. 63" long. Ultra light balsa 

construction. For 4 channels and .40 to .60 engines. 

Senior Telemaster uses 4 RC channels. A 5th channel 

could be used to make the ailerons also function as 

flaps (flaperons). With flaperons it nearly hovers into 

landings! Nothing, nothing, nothing flies like Senior 

Telemaster! Senior Telemaster is so LIGHTWEIGHT 

that we’ve found it flies BEAUTIFULLY with a 45 size 

engine. 

Radio ______________ 

SPM6600 Spektrum DX6i DSM2 

6-Ch. Radio, AR6200 Rx, 

no servos .............................. $199.99 

Four - HTS0322S Hitec HS-322 

Servo @ $9.99 ea. .................. $39.96 

Two - HT0097 12” Aileron 

Extension @ $5.99 ea. ........... $11.98 

Engine ______________ 

TTR61 Thunder Tiger 61RC .. $109.99 

WOW! Great sale on the Senior Telemaster. What a 

nice plane. I have been meaning to send a message 

telling that y'all are doing a great job. I was a Tower 

Hobby guy but now I try to be a Hobby Lobby guy. I 

remember having a Hobby Lobby radio from the 1970's 

and when I got back in the hobby about 3 years ago I 

searched for your web site. A good find. Keep up the 

great service and products, in the long run it wins. 

A Greig 

Your structure will look this 

good 

Light weight and 1330 

square inches of wing, this 

is modeling at its best 

Simple elegant design, rugged 

but light 

Turbulator strips on wing 

give better airflow and light 

weight 

Lifting stabilizer, one of the 

things that makes 

Telemaster fly so well 

Perfectly cut wing ribs and 

a mountain of well-cut 

balsa parts 

30 Year-Old Hobby-Lobby R/C Airplane 

Wins UAV Contest 

Proof that you CAN teach an old dog new tricks... 

"Team Telemaster" entered and won with a Hobby-Lobby Senior Telemaster kit 

purchased over 30 years ago by Aaron's dad. Aaron was 18 months old at the 

time of purchase. Furthermore, they beat two other university-sponsored teams 

that outspent them 4 to 1 or more. "Everyone was aerospace engineers, Simeon 

and I didn't finish more than a semester of engineering" Aaron said. "And both 

university teams crashed their planes." 

"The entire team at Hobby-Lobby is thrilled to see our classic Telemaster take on the big 

guys and win. The Telemaster has been a consistently great plane for R/C pilots looking 

for easy flying characteristics combined with a simple assembly process. We are now 

seeing lots of interest in using this affordable, proven platform by hobbyists and 

universities interested in expanding the civilian possibilities for UAV's." 


HLA007RW Hobby-Lobby Ready 

Built Senior Telemaster (Red) 

................................................ $209.99 

HLA007 Hobby Lobby Ready Built 

Senior Telemaster (Yellow) 

................................................ $209.99 

94” wingspan, 64” long, 1330 sq. in. 

wing area (Stab area 320 sq. in.), 10 lbs. 

8 oz. flying weight (41 series AXI motor, 

16 NiMH cells). This is EXACTLY the 

same flying weight that it is when 

equipped with a glow engine. It is 

READY BUILT and COVERED in yellow 

or red iron-on covering. Just install your 

power system and radio equipment and 

FLY IT! Ready Built Senior Telemaster is 

accurately constructed of balsa and 

hardwoods, with a rib and spar wing. 

The quality is tops. How does it fly It’s 

a Telemaster - and nothing flies like a 

Telemaster! It will land backwards in a 

15 mph wind. Its takeoffs are majestic 

like an airliner. For aerobatics or carrying 

heavy loads we’ve included wing struts 

and secure mounting points that will help the 

huge wing carry heavier positive G loads. Ready 

Built Senior Telemaster has a two-piece wing so 

can haul it in a small car. Almost all hardware is 

included in the airplane's box: Wheels, steerable 

tail wheel, hinges, pushrods, control horns, and 

more. For 4 channels: Aileron (2 servos), 

Elevator, Rudder and Throttle. If you are building 

the Senior Telemaster for glow power, you will 

need a .61 engine (TTR9160) and other glow 

flight items like a glow plug, glow starter, engine 

starter, and fuel. 

TELEMASTER 

Huge, Almost-Ready-to-Fly 8 foot Telemaster 

Batteries install through pre-made 

hatch, no need to remove the wing. 

Magnets can be used for hatch 

latch. 

Jeti Speed control located 

below motor for good cooling 

AXI motor installs easily with 

nylon spacers and fasteners, 

Available Separatelly 

Radio ______________ 

SPM6600 Spektrum DX6i Full 

Range Transmitter w/o 

Servos MD2 ................. $199.99 

Four-HTS0322S Hitec HS-322 

Standard Servo @ $9.99 ea. ... $39.96 

Two-HT0097 12" Aileron Extensions 

@ $5.99 ea. ............................... $11.98 

Motor, Motor Mount ________ 

PM412018 "AXI 4120/18" 

OUTRUNNER Motor .............. $129.99 

PM41002 Radial Mount Set 

41 Series .................................. $18.59 

Motor Controller, BEC ____ 

JAP70SB Jeti ADVANCE Pro 70 

Amp w/Switching BEC .... $129.99 

Prop _______________ 

PE14010E APC 14x10 E Prop .. $5.20 

Battery ______________ 


"Pro Lite V2” 20C LiPoly Pack .. $134.99 

Charger _______ 

SRC506 IC6 Balance 

Charger for 1-6 LiPoly 

Cells ................ $75.99 

Struts and matching covering 

included with model. 

Two-piece wing slides apart for 

easy transport 

Strong wire landing gear pre-bent 

and pre-soldered 

20 


Huge - Tom Hunt calls it “Balsa 

Overcast” 

TELEMASTER 

HLA112 Aero Craft 12 FOOT Telemaster Kit .. $349.99 

143-1/2" wingspan, 90" long, 3050 sq. in. wing area 

(over 21 sq. ft.), 23 pounds flying weight, a little over 16 

oz. per sq. ft. wing loading (and about 14 oz./sq. ft. when 

you count the lifting stabilizer). Laser cut wing ribs, 

aileron, stab and elevator ribs. Construction is 

conventional all balsa and plywood and the kit for this 

huge airplane is a veritable lumberyard. Nothing flies like 

a Telemaster! Its gentle handling character is 

legendary as is its ability to lift weight. This model can 

easily lift camera equipment or a camcorder and is so 

slow and stable that the photos and videos come out 

beautifully. It jumps off the ground with the 

recommended AXI 5330 Outrunner motor. Model is easy 

to build but requires a large area for construction. Wing is 

three-piece; center section is the width of the fuselage 

and bolts to it, the two wing panels bolt to the center 

section. The lift struts are functional and must be used. 

Wing panels can be built with flaps or without. Lifting 

stabilizer has an area of 672 sq. in. (larger than many 

airplane wings) and is removable for transport. 

Fuselage is almost 8 feet long 

A builders dream, your wing will 

look this good 

This model is HUGE, this is the 

tail framework 

Plans show every detail, like 

this installation of the lift 

struts 

Radio _____________ 


7-Ch. Radio, AR7000 Rx, 

4 DS-821 Servos ............................ $349.99 

HTS0422 Hitec HS-422 Servos ........ $12.99 

HT0604 12” Heavy Duty Servo 

Extension ............................................ $6.69 

Four- HT0605 24” Heavy Duty Servo 

Extension @ $8.89 ea. ..................... $35.56 

Four- HT0606 36” Heavy Duty Servo 

Extension @ $9.79 ea. ..................... $39.16 

Two- HT0096 Aileron "Y" Connector 

@ $9.59 ea. ....................................... $19.18 

Motor ____________ 


Brushless Motor ................... $269.99 


JAP90P Jeti ADVANCE Pro 90 Amp 

Opto Brushless Controller ............ $257.99 

HT00925 Hitec 1800 mAh Receiver 

Battery ............................................... $27.99 

Prop ______________ 

PE20011E 20 x 11E Thin Electric 

Propeller ............................................ $13.99 

Battery, Connectors ____________ 

Two- TP50005SPL2 5-Cell 18.5V 


Pack @ $184.99 ea. ......................... $369.98 

DEA7002 Series Module with 

Deans Ultra Connectors ................... $12.99 

Charger ___________ 


Digital Balance Charger 

...................................... $75.99 

Classic all balsa and plywood 

construction 

12 Foot Telemaster can be 

powered with a Gas Motor (We 

still prefer a Big AXI) 


TELEMASTER 

HUGE, Ready-Built version 

of the 12 Foot Telemaster 

HLI212 12 Foot Telemaster ARF 

w/Drop Box ................ $1099.99 

For the club or individual that wants a 

huge airplane that can carry cameras, 

drop parachute guys or candy, fly 

incredibly slowly and still be transported 

in a regular car-the 12 Foot Telemaster 

ARF is it. Every flying event that I took 

the original kit built 12 Foot Telemaster 

to brought out the same question again 

and again-“Do you have this in an ARF 

I simply don't have the time, space, ability to build one but would love to have one.” We listened 

and here it is. To solve the problem of how to transport the airplane we designed the fuselage in 

2 parts. 3 large diameter aluminum tubes and nuts hold the halves together; assembling them 

takes only a minute. With all of the elevator and rudder functions being controlled by servos in the 

tail, only electrical connections need to be made. The elevator halves are removable; each half 

has its own servo and slips onto an aluminum tube spar joiner. The vertical fin and rudder with 

tail wheel steering remain attached to the rear fuselage. The forward fuselage has two operable 

side doors that make access to the interior of the airplane easy. Whether you build yours as an 

electric (like we did) or install a gasoline engine, this easy access is great. The forward part of the 

fuselage also contains the built in drop box. It is easy to load from the top under the 

magnetically latched hatch and large enough to hold several pounds of candy. A central partition 

in the drop box allows you to drop the contents of each side independently, 2 drops during one 

flight. The wings are huge and again to aid in transport they are divided into 4 sections, each a 

little under 3 feet long. The inboard sections have large flaps and the outboard sections contain 

the ailerons. In flight into a 10mph headwind with full flaps you can just about park the Telemaster 

at zero ground speed. This airplane is the definition of a floater, yet with the flaps up it penetrates 

and handles wind well. The anodized aluminum struts are fully functional. The aluminum wing 

tube captures the outer strut ends for an exceptionally strong connection. The landing gear is 

heavy duty wire shock absorbing design and the 7” diameter wheels will allow take-offs and 

landings from even fairly rough fields. An absolute joy to fly, the 12 Foot Telemaster will take-off 

in little more than its own length and with full flaps will land in a small area. This is a great show 

plane and always a huge hit with the kids when its raining candy! 

22 

Radio ______________ 


7-Channel Radio, AR7000 Rx, 

4 DS-821 Servos ............... $349.99 

Three- HTS0635 Hitec HS-635HB Hi 

Torque Servos @ $27.99 .... $83.97 

Seven-HT0604 12” HD Aileron 

Extensions @ $6.69 ea. ...... $46.83 

Two-HT0605 24” HD Aileron 

Extensions @ $8.89 ea. ...... $17.78 

Four-HT0606 36” HD Aileron 

Extensions @ $9.79 ea. ...... $39.16 

Motor, Prop __________ 

PM5360 AXI “5360 Special” 

OUTRUNNER …................ $645.99 

PM5360P 30” X 20” Wood Prop 

for AXI 5360 ........................ $89.99 

Motor Controller _______ 


Brushless Controller ….... $298.99 

SPINBOX Jeti SPIN BOX 

Programming Control ........ $39.99 

JEM02 Jeti MAX BEC 2 ....... $89.99 


2100 mAh “Pro Lite V2” 20C 

LiPoly Pack @ $47.99 ea. .. $95.98 

Battery _____________ 



Pack @ $184.99 ea. ........... $369.98 


Deans Ultra Connectors .... $12.99 

Charger ____________ 


Digital Balance Charger .... $75.99 

Parachute Drop At SEFF 2009 

Your R/C Superstore • (866) 512-1444 

Candy Drop at 

NEAT Fair 2009

Warbirds 

Warbirds with amazing performance 

Beautifully engineered for easy assembly and great flying performance. 

Made of lightweight pre-painted molded foam. Includes waterslide 

decals representing an authentic aircraft. The surface of the foam is 

toughened and the areas on the bottom of the plane that contact the 

ground are made of tough plastic. The flight performance of the Alfa 

planes is simply amazing. Additional optional equipment is available on 

our website at www.hobby-lobby.com. 

ALF219 Bf-109F Grey Camo ARF........................................ $119.99 

32-3/4" wingspan, 29-1/2" long, 175 sq. in. wing area, 15-1/2 oz. 

ALF201 Alfa P-47 Thunderbolt ARF ........................ $119.99 

32-3/4" wingspan, 28" long, 192 sq. in. wing area, 15 oz. 

ALF201 

ALF202 P-51D Mustang ARF ..................................... $119.99 


ALF202 

ALF203 Lavochkin LA-7 Scale ARF ........................... $119.99 


ALF204 F4U-1 Corsair Scale ARF ............................. $119.99 


ALF203 

ALF205 Focke Wulf FW-190 A-8 Scale ARF ............. $119.99 

33-1/2" wingspan, 28-3/4" long, 186 sq. in. wing area, 16 oz. 

ALF204 

ALF207 P-51D Mustang Marie ARF .......................... $119.99 


ALF205 

ALF208 F4U-1 Corsair ARF Scale ............................ $119.99 


ALF209 P-47D Thunderbolt Chow Hound ............... $119.99 


ALF207 

ALF208 

For items needed to complete 

these aircraft, visit our website 

at 


or call us at 

866-512-1444 

ALF209 


Warbirds 

ALF217 P-47 Thunderbolt ARF ....................................... $119.99 

32-3/4" wingspan, 28" long, 192 sq. in. wing area, 16 oz 

ALF218 Bf-109F Tropical Camo ARF ................................... $119.99 


ALF210 Nakajima Ki.84a Hayate ARF ..................... $119.99 


ALF210 

ALF211 P-51B Mustang Shangri-La ARF ................. $119.99 


ALF211 

ALF212 P-47 Thunderbolt Razorback ARF .............. $119.99 


ALF213 Bristol Beaufighter Twin ARF ...................... $119.99 


ALF212 

ALF214 F4F Wildcat ARF ........................................... $119.99 


ALF213 

ALF215 Spitfire Mk. Vb ARF ...................................... $119.99 


ALF216 Fw 190 D-9 Dora ARF ................................... $119.99 


ALF214 

ALF301 Albatros D.V ARF Biplane ............................ $119.99 


ALF215 

24 

ALF216 

For items needed to complete these 

aircraft, visit our website 

at 


or call us at 

866-512-1444 


ALF301


Finally, a Mustang that anyone can fly - Now Includes 2.4 GHz Radio 

Includes Brushless OUTRUNNER Motor 

and Lithium Battery 

Scale landing gear 

plugs into wing for 

quick, easy transport 

AT7602 Art-Tech "Mustang P-51D" RTF w/2.4 GHz Radio .................................. $219.99 

37-3/4" wingspan, 30-3/4" long, 245 sq. in. wing area, 20 oz. flying weight. Fuselage and wing are molded high-density bead 

foam. Stabilizer and rudder are heat-molded foam with a tough, smooth surface, all pre-hinged and painted. The airplane 

comes completely pre-painted and decorated, the servos and electronics are pre-installed, and the brushless OUTRUNNER 

motor and speed control are installed and ready for use. The scale 4-bladed propeller (there are 2 included) and special 

4-blade spinner really add to the authentic appearance, as does the scale landing gear and wheels that come assembled 

and ready to be screwed in place. The wing has individual aileron servos pre-installed and ready to plug into the radio 

receiver. The assembly is very quick and easy; in the time it takes to charge the included 3-cell 1300mAh Lithium battery with 

the included 12 Volt balance charger, (12 Volt battery or power supply required) the airplane can be ready for flight. The 

included 2.4 GHz 6-channel radio requires 8-AA batteries (sold separately). Almost all novice pilots want to fly a Mustang and 

generally this is the worst possible choice - until now. The gentle flying character and predictability of this airplane is suitable 

for even fairly low time pilots. The big 4-bladed prop provides lots of thrust with only moderate speed, the wide stance of the 

landing gear gives you good ground handling, and the high lift wing provides great handling even at low speed. Flight times 

are about 10-15 minutes. 

Battery box pre-installed, 

perfect balance is 

automatic 

Out of AA 

batteries 

Transmitter 

uses: 

Two - BATAA Pack of 

4 AA Alkaline Cells 

@ $3.50 ea. ..... $7.00 

To increase your flying time order an extra battery: AT3234 Art-Tech 11.1V 1300 mAh LiPoly Battery .....................… $34.99 

NEW! Ready-to-Fly with 6-channel 2.4 GHz Radio, Scale 4-Blade Prop and Retracts 

ESM047A P-47 Thunderbolt RTF ........................................ $249.99 

ESM047B P-47 Thunderbolt ARF (Receiver Ready) ......... $189.99 

The P-47 was the heaviest US single-engine fighter of WWII and was 

built in greater quantities than any other. More than half a million 

combat sorties were flown in P-47’s between the years of 1943 and the 

end of the war in 1945. One of the first true multi-role fighters, the Jug 

was a fighter, bomber, dive-bomber and ground attack aircraft. The 

P-47 was also the first piston-powered fighter to exceed 500 mph. 

41" wingspan, 35" long, 258 sq. in. wing area, 27 oz. flying weight. 

Nearly everything is included in the box. The only additional parts 

required are the AA batteries for the included 2.4 GHz 6-channel radio 

system and a small amount of 5-minute epoxy for gluing the tail 

feathers in place. All pre-painted molded foam construction with the 

decals pre-installed and coated with a clear polyurethane spray for 

durability. The powerful outrunner brushless motor (1050kv) has plenty 

of power to swing the scale 11" 4-bladed propeller. The 25A speed 

control is pre-installed and connected using Genuine Deans 

Ultraconnectors, as is the supplied 3-cell 1650 mAh Lipo flight battery. 

Sturdy mechanical retracts are pre-installed in the wings and 

pre-connected to the retract servo. The gear legs have scale gear 

doors attached; tail wheel is steerable with rudder input. Includes a 

complete set of illustrated instructions with all control throws and CG 

information clearly presented. Tips on Lipo battery care and flying are 

included as well. After you charge the flight battery with the included 

Lipo 2-3 Cell charger, you are ready to fly. The scale outline of the 

P-47 is accurately represented. Combined with the scale 4-bladed prop 

and the retracts, you have a great flying package that looks terrific on 

the ground, taxiing out to the runway, or flying by with the gear up. The 

P-47 has solid flying manners with a very slow stall speed and 

predictable control response. The wide stance of the landing gear 

makes ground handling very solid and the steerable tail wheel keeps 

everything going in the proper direction. The big 4-bladed scale prop 

provides a lot of thrust; the smooth application of power is required for 

a scale take-off and a little power needs to carry into the landing for a 

smooth result. A great choice for the pilot with some aileron experience. 

Out of AA batteries Transmitter uses: 

Two - BATAA Pack of 4 AA Alkaline Cells @ $3.50 ea. ..... $7.00 


Scale Electric Flight 

Big 4-foot wingspan scale model with stunning detail 

FSK033A Flying Styro North American "B-25J Mitchell", Basic Model ....................... $289.99 

FSK033B Flying Styro North American "B-25J Mitchell", Super Detailed ................... $319.99 

48" wingspan, 37" long, 313 sq. in. wing area, 35 oz. flying weight (with landing gear), 16 oz. per 

sq. ft. wing loading. Flying Styro's biggest and most ambitious scale model, the North American 

B-25. Can be built as a basic flying model without landing gear and detail parts or as the super 

detailed version which includes the landing gear, cockpit interior, front greenhouse interior, guns, 

motor details, landing lights, pilot figures and plastic skid plates. We built the super detailed version 

and are flying it both with and without the landing gear. Outboard wing panels are removable for 

easier transport and storage. This is an airplane for the modeler who enjoys modeling. Although a 

great deal of highly detailed work has been pre-done for you, there is still a lot of modeling to be 

done to complete the airplane. For those who enjoy modeling, this can be more than half the fun. 

Our B-25 model is powered with two AXI Gold 2212/34 OUTRUNNER motors driving the scale 

3-bladed props; which provides, plenty of power and good duration. Model is all pre-painted 

vacuformed foam construction with balsa and plywood reinforcements. Assembly will take 20-40 

hours depending on the degree of detail that you choose. For 3 channels: Ailerons (2 servos), 

Elevator and Throttle. 

FSK033C Flying Styro Super Detail Set for B-25J Basic ............................................ $69.99 

Combined with the Basic model (FSK033A) you have the contents of the Super Detailed model 

(FSK033B). 

Radio ______________ 


w/Receiver ........................... $99.99 

HTS055 Hitec HS-55 Servo ... $13.99 

Two - HT0096 "Y" Connector 

@ $9.59 ea. .......................... $19.18 

Two - HT0097 12" Servo Extension 

@ $5.99 ea. ............................................ $11.98 

Two - HT0099 6" Servo Extension 

@ $5.59 ea. .............................................. $11.18 

Motors ______________ 

Two - PM221234 AXI 2212/34 

OUTRUNNER Brushless Motor 

@ $79.99 ea. ....................... $159.98 

Two - PM22002 Radial Mount for AXI 22 Series 

Motor @ $14.99 ea. .................. $29.98 

Two - MJ21011 Gold Connectors, 1.8mm 

@ $7.99 ea. ................................ $15.98 

Motor Controllers _______ 

Two - JAP08 Jeti "Advance PRO" 8 

Amp @ $58.99 ea. ............. $117.98 

Props ______________ 

Included: Two 3-blade scale props and spinners 

are included in the kit. 

Battery _____________ 

TP33003SPL2 3-Cell 11.1V 3300mAh "Pro 

Lite V2” 20C LiPoly Pack..... $79.99 

Charger _____________ 

TPC425 Thunder Power 1-4 Cell 

Li-Poly Charger ................. $49.99 


Deans Ultra ........................ $4.99 

26 

Scale Warthog for twin JetScreamer motors and XF-Fans 

FSK036 Flying Styro "A-10 Warthog" Ducted Fan ARF ............................................ $289.99 


flying weight. Terrific looking jet, all molded hollow foam 

construction, pre-painted in matte finished camouflage colors. 

Tremendous amount of detail: full cockpit interior, scale landing 

gear for static display, full set of bombs and rockets, and complete 

scale waterslide decals. Two of our 56mm "XF-Fan" units with two 

JetScreamer motors make the perfect power package for this jet, 

providing tremendous thrust for powerful flight performance. Jet 

can be hand launched and landed on its belly; the main wheels 

extend below the airplane which protects the bottom. This is a kit for the experienced modeler 

who enjoys building and flying scale models. The assembly time takes between 20 - 40 hours 

depending on the degree of finish. Minimum 3 channel radio required: Ailerons (2 servos), 

Elevator, Throttle. 


Radio _______________ 

SPM6600 Spektrum DX6i Full 

Range Transmitter w/o Servos 

MD2 .................................... $179.99 

Three - HTS055 Hitec HS-55 Servos 

@ $13.99 ea. ........................ $41.97 

Two - HT0097 Hitec 12"Servo Extensions 

@ $5.99 ea. .......................... $11.98 

Ducted Fans, Motors ______ 

Two - ETH550 "XF-Fan" 56mm 

Ducted Fan @ $24.99 ea. ... $49.98 

Two - MMC5156 "JetScreamer" 

OUTRUNNERS w/21mm 

Adapters @ $69.99 ea. ..... $139.98 


Two - ABC20 Atlas Black 20 Amp Brushless 

Controller@ $38.99 ea. ....... $77.98 

Two - MJ21011 1.8mm Gold 

Connectors @ $7.99 ea. ..... $15.98 

Battery _____________ 

TP26003SPL2 3-Cell 11.1V 2600mAh "Pro 

Lite V2” 20C LiPoly Pack .. $62.99 

Charger ____________ 

ETC2700 AnyRC 1-5 Cell LiPoly 

Smart Charger ............... $49.99

NEW! Are you ready to tumble…. 

360 degree thrust vectoring nozzle allows unbelievable maneuvers 

HLI3500 F-35 Lightning II 360 Degree Vectored Thrust Jet ..................................................... $279.99 

31-1/4” (800mm) wingspan, 47-1/8” (1200mm) long, 36 oz. (1000g) flying weight. Now experience the 

thrill of almost unlimited aerobatic maneuvers: flat spins, tumbles and high alpha flight-all are possible 

thanks to the fully vectored thrust design of the F-35. The F-35 is officially licensed by Lockheed Martin 

and comes with a 70mm fan and Outrunner brushless motor (2750Kv), 45 Amp ESC with switch mode 

BEC, 4-cell 2200mAh Lipo battery and comes pre-painted. Glue the wings and tails in place and install 

your 7-channel radio and you are ready to perform the impossible. The battery and the speed control 

are pre-connected with genuine Deans Ultra connectors. Retracts with nose wheel steering are preinstalled. 

Photo illustrated instructions include step-by-step setup of the various mixes on a Spektrum 

DX7 radio. Recommended control throws, CG and expo settings are provided. 

HLI3501 F-35 lightning II 360 Degree Vectored Thrust AIRFAME ONLY ................................ $129.99 

Radio, Servos ____________________ 

SPM2710 DX7 DSM2-7 Channel, AR7000 Rx, 4-DS821 

Digital Servos ......... $349.99 (you will not be using the 

servos with airplane) 

Ten- 9 gram servos (Included and Installed) 

Motor _____________________________ 

Outrunner Brushless (2750 Kv) (Included and Installed) 

Ducted Fan Unit 70mm w/6-bladed impeller (Included and Installed) 

Thrust Vector Nozzle 360 Degree TV Nozzle (Included and Installed) 

Speed Control 45A ESC w/Switch Mode BEC pre-connected with 

Genuine Deans Ultra Conns. (Included and Installed) 

Retractable Landing Gear 2 Main gear and 1 steerable nose gear 

(Included and Installed) 

Battery 4-Cell 14.8V 2200mAh 20C LiPoly 

Pack (Included in kit) 

Battery Charger ___________________ 


Balance Charger ........................... $75.99 

NEW! Spare Battery 

HLI350011 Spare 4 Cell 2200 mAh 

Battery for F-35 Jet ............. $49.99 

NEW! Sturdy single wheel retracts with steerable nose wheel 

FWF900106S Retractable Landing Gear Set w/Steerable Nose 

Gear .......................................................................................… $14.99 

Set includes 2 main gears and 1 steerable nose gear with positive up 

and down lock. Main gear retracts either forward or back, can be modified 

to inward or outward by rotating the gear leg 90 degrees. Main 

landing gear wire is 3mm and the distance from the bottom of the 

retract mechanism to the bottom of the 50mm (2”) wheel is 125mm 

(5”). The steerable nose gear has 46mm (1-13/16”) foam wheels and a 

spring loaded suspension with 12mm (7/16”) of travel. The distance 

from the bottom of the retract mechanism to the bottom of the tire is 

121mm (4-3/4”). Each retract requires a servo that can provide 17mm 

(5/8”) of travel. One additional servo will be required for steering of the 

nose wheel. Includes mounting plates and screws. Designed for use in 

material up to 25mm (1”) thick. Can also be used as fixed gear by 

installing the included fixed gear housing. Use on planes up to about 

3-1/2 pounds flying weight. 


Electric Ducted Fan 

NEW! World’s first Twin vectored thrust ducted fan RC Jet performs maneuvers not possible with other RC Jets 

R/C Pilots voted the Su-34 

"Best New Product" at 

SEFF 2009 

(Southeast Electric Flight Festival) 

"Best Foam Jet" awarded to the Su-34 

Vectored Thrust Jet at the 2009 

E-Jets International flying event 

FW034A Su-34 Fullback Twin Vectored Thrust Jet, Green Camo ................................... $329.99 

FW034B Su-34 Fullback Twin Vectored Thrust Jet, Blue Camo ...................................... $329.99 

35-1/2" wingspan, 57" long, 53 oz. flying weight.This is a BIG all molded foam jet with great detail and 

great performance. Two 64mm fans with two 3500 Kv Outrunner brushless motors and two 45 Amp 

brushless speed controllers power the big jet. Take offs from a smooth runway or short grass are quick 

and the initial thrust will blast the jet nearly straight up. The pilots in attendance at SEFF 2009 

(Southeast Electric Flight Festival) voted the Su-34 the "Best New Product" after watching the incredible 

flight performance of this cutting edge aircraft. Maneuvers that simply cannot be done with other 

jets are routine with the vectored thrust nozzles of the Su-34. The famous "Cobra Maneuver" can be 

flown as well as flips and tumbles that will amaze your flying buddies. Each nozzle is individually controlled 

and is mixed with both elevator and aileron controls. A 7-channel computer radio (minimum) is 

a must. We show the step-by-step setup screens of how to program a Spektrum DX-7 with the mixing 

required. The jet is easy to fly and very solid in the air, however due to the setup,the model is best 

suited for the experienced to advanced RC pilot. The Su-34 comes with a set of retractable landing 

gear with twin wheel trucks for the mains and steerable twin wheel nose gear. Each gear has its own 

adjustable servo for gear retraction. There are a total of 10 servos pre-installed in the jet: 2-elevator, 

2-aileron, 2-vectored thrust, 3-gear retract, 1-steering. Assembly only takes about 1-2 hours; epoxy 

glue is included for gluing wing and tail parts to the fuselage. Landing gear is pre-installed as are all 

other servos and control surfaces. The included 4-cell 3000 mAh lipo battery pack provides about a 

4-minute flight - but what an exciting 4 minutes! 

SU-34 with “Best New Product” 

award from SEFF 2009 

FW034BE Su-34 Fullback Blue Camo Twin Vectored Thrust Jet AIRFRAME ONLY ....... $129.99 

FW034E Su-34 Fullback Twin Vectored Thrust Jet AIRFRAME ONLY .............................. $129.99 

NEW! Spare Battery 

FW3026 Spare 4-Cell 3000 mAh Battery 

for SU-34 Jet .............................. $69.99 

28 

NEW! Pivoting dual-wheel mains and steerable nose wheel 

FWF900106D Retractable Landing Gear Set with Dual Main Wheels .. $19.99 

Set includes 2 main gears with pivoting dual wheels and a steerable nose gear unit 

with dual tires. Main gear retracts either forward or back, wheels rotate 90 degrees 

when retracted to minimize their profile. Each unit locks in both the up and down 

position. Main landing gear wire is 3mm and the distance from the bottom of the 

retract mechanism to the bottom of the 43mm (1-11/16”) wheels is 122mm (4-3/4”). 

The steerable nose gear has 2-34mm (1-5/16”) foam wheels and a spring-loaded 

suspension with 12mm (7/16”) of travel. The distance from the bottom of the retract 

mechanism to the bottom of the tires is 136mm (5-3/8”). Each retract requires a 

servo that can provide 17mm (5/8”) of travel. One additional servo will be required 

for steering of the nose wheel. This is the landing gear from our Su-34 but is 

suitable for other aircraft with similar landing gear. Includes mounting plates and 

screws. Designed for use in material up to 25mm (1”) thick. Can also be used as 

fixed gear by installing the included fixed gear housing. Use on aircraft up to about 

3-1/2 pounds flying weight. 


NEW! Super Scale F-16 with 80mm fan, Outrunner motor and 45A ESC 

HLI3161 Super Scale F-16 Fighting Falcon ARF ....................................................... $259.99 

28-1/3" wingspan, 43-1/2" long, 160-3/4 sq. in. wing area, 35 oz. flying weight. This is a super 

scale rendition of the USAF F-16 and includes all the quality parts for flying success. The ducted 

fan unit has a diameter of 80mm and the impeller has 8 dynamically balanced blades. The 

included Outrunner brushless motor has a Kv of 2600 and is a perfect compliment to the fan. 

To complete the power unit a 45 amp speed control is provided. 

The first thing that you will notice when you open the box is the high level of detail. There are 

many injection molded plastic parts like the inlet scoop, scale landing gear legs, gear doors and 

wheels. The fins on the rockets and missiles are hard plastic, much more durable and better 

looking than the molded foam on many jets. The detail that you would expect from a 

display model, but this one flies, and flies beautifully. 

Assembly is step-by-step and the clear illustrated instructions guide you through them of all. 

The items not provided in the kit are servos (5-HS65HB required), flight battery (4-cell 2200 

mAh) and radio equipment (minimum 4-channels). The hardware is first class, hinges are pintype, 

nose wheel steering is beautifully engineered and the servo extensions for the elevator 

and aileron servos are provided. The wings have carbon rod reinforcements. 

The crystal clear canopy and its base form the battery hatch that is held in place with strong 

rare-earth magnets; access to change batteries is quick and easy. Jet comes with a complete 

complement of ordinance, 2-AGM-88 harm missiles, 2-AIM-120C wing tip missiles and 2- 

reserve drop fuel tanks. The AIM missiles are glued in place but the AGM-88's and drop tanks 

are held in place with magnets and are removable for flight and transport. 

This is a model for the more experienced modeler who is looking for terrific scale looks and solid 

flight performance. Landing gear are fixed and the jet requires a smooth surface for take-offs 

and landings. 

Radio, Servos ___________ 

SPM5500 DX5e Full Range 


no servos ............................... $99.99 

Five-HTS065 HS-65 HB Mighty 

Feather Servo @ $25.99 ea.. $129.95 

Motor _______________ 

Outrunner Brushless (2600 Kv) Included in kit 

Ducted Fan Unit __________ 

80mm Ducted Fan with 8-blade impeller 

(Dynamically Balanced) Included in kit 

Speed Control ___________ 

45A Programable ESC pre-connected with Genuine 

Deans Ultra Conns. Included in kit 

Battery ________________ 

TP22504SP30 4-Cell 14.8V 2250mAh “Pro 

Power” 30C LiPoly Pack .......................... $79.99 

DEA1300 Deans Ultra Connectors, Pr. ... $3.50 

Battery Charger 

__________ 


Digital Balance Charger ..... $75.99 

HLI3162 Super Scale F-16 Fighting Falcon Edwards Airforce 

Base Scheme ARF ......................................................... $259.99 

HLI3163 Super Scale F-16 Fighting Falcon Tiger Scheme 

ARF .............................................................................. $279.99 



Ducted fan JETS with amazing performance 

ALF104 Alfa A-4 Skyhawk Electric Ducted Fan RC Jet Airplane .................................... $169.99 

22" wingspan, 29" long, 155 sq. in. wing area, 16 oz. flying weight. 

ALF102 Alfa Model MIG-15 Electric Ducted Fan RC Jet Airplane ..................................... $159.99 

29-1/2" wingspan, 29" long, 198 sq. in. wing area, 16.5 oz. flying weight. 

ALF103 Alfa Model F-86 Electric Ducted Fan RC Jet Airplane .......................................... $159.99 

29-1/2" wingspan, 29-1/4" long, 201 sq. in. wing area, 16.5 oz. flying weight. 

All 3 jets are of hollow molded foam construction, completely pre-painted and ready for assembly. The 

surface of the foam is toughened and the areas on the bottom of the jet that contact the ground are 

made of tough plastic. The ducted fan unit is included (EDF 60/15 Mk. 2). The flight performance of 

the jets is simply amazing; with our recommended JetScreamer motor the speed is blistering. Vertical 

performance is unlimited (OK, it is limited, but only by the pilots ability to keep the airplane in sight). 

Slow speed performance is excellent and hand launching is easily done. Additional optional 

equipment is available on our website at www.hobby-lobby.com. These jets are not intended for the 

novice pilot or builder, they are not difficult and much of the work is pre-done, but some prior modeling 

experience is required for success. The ducting is smooth and elegant in design. The optimum 

balance point is molded into the bottom surface of the wing for easy reference. Waterslide decals for 

multiple versions of each aircraft are provided along with helpful instruction on their application. Total 

assembly time is about 6-8 hours. For 3-channels: Ailerons, Elevator and Throttle. 

Take off from a runway or do touchand-go's 

when you add wheels to your 

A-4 

ALF104W Alfa Wheel Set for A-4 "Skyhawk" 

.................................................................. $12.99 

Custom wheel set specifically for the Alfa A-4 

"Skyhawk". Kit includes three foam wheels, music 

wire axles, balsa and lite-ply. Cut out the marked 

wheel opening on the bottom of the fuselage and 

wing panels and glue in the wheel assemblies. 

Glue is not included. See our website for additional 

PDF instructions. 

Radio 

HTR48725 Hitec Neon 3 SS, 

Micro 05 Receiver, 2 HS-55 

Servos ........................... $69.99 

Motor/Ducted Fan 

MMC5156 LittleScreamers 

"JetScreamer" OUTRUNNER 

w/21mm Adapter .......... $69.99 

ALF51013 Alfa Rotor Plug 

for 3mm Shaft ................ $6.99 

Ducted fan included in kit 


SPIN22 Jeti SPIN 22 Amp 

Brushless Controller ..... $84.99 

SPINBOX Jeti "SPIN BOX" 

Programming Control ... $39.99 

Battery 

TP21003SPL2 3 Cell 11.1V 

2100 mAh Lipo ..... $47.99 

Charger 

ETC2500 Li-Poly Smart 

Charger for 1-4 Cells 

................................. $48.99 

BAT220 Charger Adapter, 

JST to Deans Ultra ............................ $4.99 

See more products on our website 


30 



NEW! Light and fast--super performance when mated with a JetScreamer motor 

ALF105 Alfa F-16C Camo Grey ARF ..................... $169.99 

ALF106 Alfa F-16C 90th Anniversary Color ARF .. $169.99 

24-3/4" wingspan, 33-3/4" long, 181 sq. in. wing area, 17 oz. flying 

weight. The jet is molded entirely from polystyrene foam and 

completely pre-painted, ready for assembly. Complete instructions are 

provided along with an exploded view drawing of the jet. The 

assembly is not difficult but prior building experience is recommened. 

Assembly will take 6-8 hours depending on choice of glues. 

Waterslide decals for 6 different combat aircraft are included. A wide 

selection of motors can be installed in the included Alfa 60/15 Mark II 

fan unit. We recommend the JetScreamer (MMC5156) for ballistic 

performance and jet-like speed. All aerobatic maneuvers are possible 

with the exception of those requiring a rudder. The jet is designed for 

hand launching and belly landing; the bottom of the fuselage has a 

plastic shell reinforcement to reduce wear. The landing speed is very 

slow when built to the recommended weight. Three micro servos are 

required, two for ailerons and one for elevator. 

Radio ______________ 


AR500 Receiver, no Servos .. $99.99 


@ $13.99 ea. ........................... $41.97 

Motor/Ducted Fan ________ 

MMC5156 LittleScreamers "JetScreamer" 

OUTRUNNER w/21mm Adapter .. $69.99 

ALF51013 Alfa Rotor Plug for 

3mm Shaft ............................... $6.99 

ALF51031 Alfa 5 Bladed Rotor 

................................................ $13.99 

Ducted fan unit included in kit! 


SPIN22 Jeti SPIN 22 Amp Brushless 

Controller ............................... $84.99 


Programming Control .......... $39.99 

Battery ______________ 

TP21003SPL2 3 Cell 11.1V 2100 mAh LiPo 

.................................................................. $47.99 

Charger _____________ 

SRC506 IC6 Balance Lipo Charger ...... $79.99 

SRC513 Poly-Quest 

Adapter for IC6 Charger .......................... $9.99 

NEW! Big 75mm fans with strong thrust 

Radio ______________ 

SPM5500 Spektrum DX5e w/Receiver 

................................................. $99.99 

HCH108B A-10 "Warthog" ARF ........................................................................................ $219.99 

.. 

40" wingspan, 36" long, 258 sq. in. wing area, 36 oz. flying weight. Includes two 75mm ducted fans with 

two outrunner brushless motors and two 18-amp controllers. Power is supplied by a 3-cell 2200 mAh Lipo 

battery that is easily accessed under the removable canopy. Construction is all pre-painted and 

decorated injection-molded foam. The wing is removable and reinforced with a carbon rod. The two fan 

units are fairly large (75mm diameter) and produce strong thrust at a moderate speed and low amp draw. 

The wide stance of the tricycle landing gear gives the A-10 great ground handling for taxiing and take-off 

and superior control in landing. Assembly is quick; the wing halves need to be glued together, motor 

nacelles glued to the fuselage (fans and motors are pre-installed). Motors must be plugged into the speed 

controls and the direction of rotation checked, there is no soldering required. All servos are pre-installed 

and all control surfaces are pre-hinged. Charge the 3-cell lithium battery with the included balance 

charger. Charge is done through the balance plug on the battery and each individual cell is charged 

independently to reach 4.2V. Flying the A-10 is where the fun really starts; the steering is precise and not 

overly sensitive giving you great control on the take-off. Once in the air the climb is strong and the 

control is smooth and quick. Big loops, fast or slow rolls, inverted flight are all easily done. Flight times 

are from 6-8 minutes. Landings are best accomplished with a small amount of throttle for a smooth 

approach. 

HCH108BE A-10 "Warthog" AIRFRAME ONLY Version w/ 2 - 75mm Fans................... $129.99 

To double your flight time, 

order an extra battery: 

HCH500001 3 Cell 2200mAh 11.1V 

Lipo Battery ............................ $49.99 



NEW! Navy delta wing jet with 64mm fan and outrunner brushless motor 

Radio ______________ 

SPM5500 Spektrum DX5e w/Receiver 

.................................................... $99.99 

Charger ____________ 


Balance Charger ...................... $75.99 

FMS051 F4D-1 Skyray Jet ARF ............................................................................................................... $169.99 

25-1/2" wingspan, 35-3/4" long, 309 sq. in. wing area, 21 oz. flying weight. All molded EPS foam construction, 

pre-painted and decorated with waterslide decals. Assembly is quick and consists of gluing the main wing panels 

and vertical tail to the fuselage, gluing on the nose cone and installing the landing gear. In less time than it takes 

to charge the 3-cell 1300mAh lithium polymer battery with the included lipo balance charger, you can have the jet 

ready to fly. Requires a 4-channel radio system with Delta mixing ability. We recommend a radio with end point 

adjustments and exponential. Jet has nose wheel steering, its wide stance on its landing gear provides good 

ground handling and control for smooth takeoffs and landings. The main gear are a snap-in installation and are 

easily removed, the nose gear can be removed by loosening an Allen screw. Jet can be flown with or without the 

gear. The 64mm ducted fan is pre-installed with an outrunner brushless motor and 30 amp electronic speed 

control producing smooth power for jet-like performance. The servos, control horns and control surface hinges are 

all pre-assembled. The canopy is held in place by magnets giving quick and easy access to the battery 

compartment. The F4D-1 has great flight manners and with its large wing area and delta configuration it slows 

down to a walk when the nose is raised. With the nose down and the throttle up, the F4D-1 really gets moving; its 

broad speed range makes it a joy to fly. Not a difficult model to fly, this intermediate level ducted fan is good for 

the modeler with some aileron experience. 

FMS051E F4D-1 Skyray Jet AIRFRAME ONLY ......................................................................................... $89.99 

NEW! Outrunner Brushless Motor, 4-Cell Lipo and 45A controller make this jet really perform 

Radio ______________ 


w/Receiver ........................ $99.99 

Charger ____________ 



............................................ $75.99 

32 

FW015BB F-15 Aggressor Blue ARF ............ $179.99 

FW015DB F-15 Aggressor Desert ARF ........ $179.99 

29-1/8" wingspan, 43-5/16" long, 25 oz. flying weight. 

Most F-15's are a low visibility overall gray, the 

exception to this rule are the F-15's of the 65th 

Aggressor Squadron. Their F-15's are painted in the 

colors of the Soviet Union's Su-27 Flanker and other 

opposing forces aircraft and are flown as part of the 

"Red Flag" air combat training program. These colorful 

F-15's play the role of opposing fighter aircraft and provide vital training for US pilots. We 

chose these color schemes for the model F-15 to provide the model pilot a higher level of 

visibility. All molded foam construction, pre-painted and ready for final assembly and decal 

placement. Complete photo-illustrated instructions are included with recommended control 

throws and CG location. Assembly will take you only about an hour and then another hour for 

decals, even the 5-minute epoxy is included. The F-15 comes with a powerful pre-installed 

Outrunner brushless motor (3500Kv), a 4-cell 2200mAh 20C Lipo pack and a 45A ESC with 

BEC. This combination in the 64mm fan unit gives the F-15 some serious performance. 

Take-offs are quick and the climb is just about vertical. Jet comes with fixed landing gear and 

is capable of flight from a runway or even a short grass field. Landing gear is easily 

removable and the airplane can be hand launched. Jet has a very broad speed range with 

totally predictable flight performance. Jet is docile at low speed and quick and responsive at 

high speed. A 4-channel radio system (minimum) is required as well as a dedicated Lithium 

battery charger like our SRC506 Lipo Balance charger. 

FW015BE F-15 Aggressor Blue AIRFRAME ONLY ................................................... $99.99 

FW015DE F-15 Aggressor Desert AIRFRAME ONLY ............................................... $99.99 




FMS0058 Spare 2200 mAh 4 Cell 20C LiPo 

Pack for "F-15” .................................... $73.99


70mm fan + 4 Cell lithium battery = BIG fun 

Radio 

______________ 


w/Receiver ................ $99.99 

Charger 

_____________ 



..................................... $75.99 

FMS005 F-16 Fighting Falcon ARF ............................................................................... $229.99 

30-3/4" wingspan, 48-1/2" long, 35-1/2 oz. flying weight. All molded foam construction with lots of 

detail and a very smooth finish, painted with matte paint. Total assembly time is about one hour 

due to the low parts count and beautiful fit. The 70mm fan includes an OUTRUNNER motor that 

provides lots of thrust for quick takeoffs with a strong climbout. The ducting is very clean giving the 

F-16 impressive speed, but in a model large enough for easy flight orientation. Battery changes 

are quick: just remove the canopy (it is held in place with magnets) and swap it out. Access to the 

70mm fan unit and 45A ESC is also very simple: just remove 2 screws and the entire middle 

section of the main duct can be removed. This is great for those who want to hop this one up or 

simply need easy access for maintenance and blade balancing. The main landing gear are 

installed without using any tools and only one allen screw installs the nose wheel steering. Model 

can be flown either off a runway with the included landing gear or it is easily hand launched. Flight 

times are about 5 minutes using the included 4 cell 2200 mAh LiPo battery. Landings are quite 

slow due to the large lifting body shape of the F-16. Bring it in with the nose high and it will slow 

to a walk. Includes 5 pre-installed servos. Requires a 4 channel radio. 

FMS005E F-16 Fighting Falcon AIRFRAME ONLY Version .............................................. $99.99 



FMS0058 Spare 2200 mAh 4 Cell 20C LiPo 

Pack for "F-16 Fighting Falcon" .......... $49.99 

BIG F-4 Phantom with 70mm fan, outrunner motor and 4S lipo pack included 

FMS003 "F-4 Phantom" ARF ................................................................. $229.99 

28-3/8" wingspan, 43-3/8" length, 250 sq. in. wing area, 34 oz. flying weight. This 

all-molded foam airplane comes completely painted in an attractive matte finish 

with waterslide decals applied. The 70mm fan with 

brushless outrunner motor is pre-installed, as is the 45A brushless speed control. 

The jet has 5 pre-installed servos: (2) ailerons, (2) elevators, nose wheel steering. 

Landing gear is fixed but can be easily removed for hand launching. Battery 

changes are quick, just remove the canopy that is held in place with magnets. The 

jet is large enough for good visibility in flight, but is easily transported. The thrust 

from the 70mm fan with the included 4 cell 2200 mAh LiPo battery will quickly 

accelerate the F-4 into the air. The climbout is steep and the speed impressive. The 

full scale Phantom had the glide angle of a brick; our version displays much more 

pilot friendly manners. Due to its light weight the F-4 will slow down nicely and 

retain its good flying character, making landings a thing of beauty. Flight times are 

about 5 minutes on a charge. Requires a 4 channel radio. 

FMS003E "F-4 Phantom" AIRFRAME ONLY .......................................... $99.99 

Radio ______________ 

SPM5500 Spektrum DX5e w/Receiver .. $99.99 

Charger ____________ 


Balance Charger .............................. $75.99 

To double your flight time, order an extra battery: 

FMS0036 Spare 2200 mAh 4 Cell 20C 

LiPo Pack for "F-4 Phantom" ... $49.99 



Exceptionally well engineered jet, flies smooth and fast - two 66mm fans included 

SFM290 "Executive Jet" Twin Ducted Fan ARF ....................................................... $99.99 

47" wingspan, 53-1/4" long, 370 sq. in. wing area, 47 oz. flying weight. Molded bead foam 

construction. Fuselage comes with the two 66mm fans pre-installed, ready for the motors and 

the foam engine nacelles. The wings are reinforced with carbon tubes and have molded recesses 

for aileron servos; wing tips are made of wood and pre-covered. Molded pockets with plywood 

mounting blocks for the installation of the landing gear are pre-installed in the wings and accept 

the included fixed gear or the optional retract gear (SFM3501B). Fuselage has the mount for the 

steerable nose gear pre-installed; just screw the fixed steerable gear in place. The ailerons, 

elevator and rudder are made of balsa and covered with heat-shrink film. They are pre-installed 

and the hinges are pre-pinned for safety. The fuselage has wooden servo mounts and battery 

tray pre-installed. Jet accelerates quickly and easily takes off from a smooth surface/runway with 

a strong climb rate. Jet can be hand launched and will belly land easily, without damage when 

the landing gear is removed. Plastic covers are provided to cover the landing gear openings if 

you do not install the landing gear. Speed is impressive even with the fixed gear. Flight is smooth 

and solid; the stall is at a very low speed and is not severe. The glide is amazing; the setup for 

a landing needs a long approach or you will glide right on by. Flight times with the two 1800 mAh 

packs in parallel are about 7-10 minutes of varied flying. Assembly is easy and takes about 4-6 

hours for the fixed gear version, and about an hour or two more for the retracts. For 4-channels: 

Aileron (2 servos), Elevator, Rudder/Nose steering, and Throttle. A 5th channel is required if you 

wish to add the retractable landing gear. 

Add Retractable landing gear to your Executive 

Jet - here's what you'll need: 

SFM3501B Retract Set for "Executive Jet" ............................. $24.99 

Set includes sturdy main gear and steerable nose gear with 2.5mm wire. Custom designed for 

SFM290, retracts screw in place with no modification. Includes retract units, pushrods, mounting 

screws and wheel retention hardware. Requires 2 servos, one for the main gear and one for the 

nose gear. The steering is provided by an additional pushrod connected to your existing rudder 

servo. 

You will also need: 

Two - HTS082 Hitec HS-82 Metal Gear 

Micro Servo @ $21.99 ea. ........................................................... $43.98 

HT0099 Hitec 6" Extension ............................................................ $5.59 

For nose retract servo: 

HT0096 Hitec "Y" Harness ............................................................. $9.59 

For 2 retract servos on one channel 

Radio 

SPM6600 Spekrtum DX6i Full 

Range Transmitter w/o Servos 

MD2 ..................................... $199.99 

Two- HTS055 Hitec HS-55 Sub 

Micro Servo @ $13.99 ea. ... $27.98 

Two - HTS082 Hitec HS-82 Metal 

Gear Servo @ $21.99 ea. .... $43.98 

Two - HT0097 Hitec 12" Extensions 

@ $5.99 ea. ........................... $11.98 

HT0096 Hitec "Y" Harness .... $9.59 

Motors 

Two - MT2235 SFM OUTRUNNER 

Brushless Motor @ $39.99 ea. 

.............................................. $79.98 


Two - SFM2421 30 Amp Brushless 

Speed Control 

@ $39.99 ea. ....................... $79.98 

Two - MJ21011 1.8mm Connectors, 

3 Sets @ $7.99 ea. ............. $15.98 

Battery 

Two - TP21003SPL2 3-Cell 11.1V 

2100mAh “Pro Lite V2” 20C 

@ $47.99 ea. ....................... $95.98 

DEA7001 Parallel Module with 


Charger 


LiPoly Cells ....................... $49.99 


Deans Ultra ......................... $4.99 

Pre-wired and ready to install - 9 LED's total 

SFM290L Scale Lighting Set for Executive Jet ........................... $119.99 

Completely pre-wired and ready to install in your Executive Jet. Includes1 red and 1 green position 

light, 1 red and 1 white strobe light each on its own circuit and 5 landing lights on 2 circuits. The heart 

of the system is a solid-state controller that is powered from your flight battery. It controls the strobe 

pattern for the 2 strobe circuits (F1 and F2); each strobe circuit is independent and can be 

programmed for its own pattern of flashes. The dual landing light circuits (L1 and L2) are controlled 

by your landing gear switch. When you flip the switch to lower the gear, the first landing light circuit 

lights up (3 LED's), a little more than a second later the second light circuit (2 LED's on the main gear) 

is switched on. Full illustrated instructions are included and the only soldering required is to connect 

the input power leads to the input power of the speed controls. Installation can be done either while 

building the jet or just as easily as a retrofit to an already built model. Can be installed on jets with 

fixed gear or on jets with retracts installed. 

34 


Good flying 3D Airplane--- at a GREAT price 

Aerobatic and 3D Flight 

SK055 Yak-55, Yellow/Pink .................................................... $29.99 

SK056 Yak-55, Blue/Black ..................................................... $29.99 

SK057 Yak-55, Red/Blue ........................................................ $29.99 

SK058 Yak-55, Red/Black ...................................................... $29.99 

Radio ______________ 

SPM5500 Spektrum DX5e Full 

RangeTransmitter, ............. $99.99 

Three - HTS055 Hitec HS-55 Servo 

@ $13.99 ea. ....................... $41.97 

Motor ______________ 

SK400XT Esskay OUTRUNNER 

Motor, 400XT ...................... $29.99 

Prop, Prop Adapter ______ 

P10038 APC 10x3.8 Prop .... $2.70 

MJ8030 3mm Prop Adapter for 

APC Props ............................ $3.99 



Brushless Controller ......... $43.99 

Battery ______________ 


“Pro Lite V2” 20C w/JST ... $29.99 

Charger ______________ 


Li-Poly Cells ....................... $33.99 

32” wingspan, 29” long, 208 sq. in. wing area, 8 oz. flying weight. 

5-1/2 oz. per sq. ft. wing loading. Lightweight pre-printed foam 

construction, the parts are pre-notched for accurate and strong 

assembly. Wing stiffened with 3mm carbon rod. Carbon rod material 

for elevator and rudder pushrods included. Assembly takes only an 

hour or two using foam friendly CA and a small amount of Epoxy. Light 

enough for indoor flying but still has the strength and stability 

necessary for outdoor flying. Fully 3D capable with the power system 

that we recommend. Controls are Aileron, Elevator, Rudder, and 

Throttle. 

Big 3D EPP foam airplane 

Radio ______________ 

SPM5500 Spektrum DX5e Full 

Range Transmitter ............. $99.99 

Five-HTS056 Hitec HS-56HB Sub 

Micro BB Servo @ $24.99 ea. 

........................................... $124.95 

Motor, Spinner _______ 

POTM200 Potensky POT 200 W 


w/Spinner ......................... $84.99 

Prop ______________ 

P11038 APC 11x3.8 Prop ... $2.90 



Brushless Controller ....... $66.99 

Battery _____________ 


“Pro Lite V2” 20C ............ $47.99 

Charger ___________ 

ETC2500 Li-Poly Smart Charger 

for 1-4 Cells ..................... $48.99 

BAT220 Charger Adapter - JST 

to Deans Ultra ................... $4.99 

POT201 Potensky “Uzi XXL” ............................................... $199.99 

39" wingspan, 40-1/2" long, 698 sq. in. wing area, 25 oz. flying weight. 

Nearly 5 sq. ft. of wing area, with a wing loading just over 5 oz. per. 

sq. ft. Control surfaces are pre-hinged. The rounded leading edges for 

all flying surfaces are pre-cut. The airplane will slow to a walking pace 

or open the throttle and fly straight up. Carbon rods stiffen the structure. 

EPP foam is very durable. This makes a great combination for 3D flight. 

Build in a couple evenings. Good illustrated instructions. For 4 channels: 

Ailerons, Elevator, Rudder and Throttle. 



Light and tough EPP 3D aerobat-flies off water with optional floats 

HC1292A Hacker “Super Zoom” 4D, Red ............ $119.99 

HC1292B Hacker “Super Zoom” 4D, Yellow ....... $119.99 

HC1292C Hacker “Super Zoom” 4D, Purple ....... $119.99 

39-1/3” wingspan, 39-3/4” long, 361 sq. in. wing area, 15-1/2 

oz. flying weight, a little more than 6 oz. per sq. ft. wing 

loading. Tough but light EPP foam construction with HUGE 

control surfaces make this airplane a top performer. 

(40% of the symmetrical wing is in the ailerons) Broad speed 

range, from a walk when in an alpha knife-edge or a harrier, to 

faster speeds with sharp snaps and crisp point rolls. Easy and 

tough enough for a beginner yet really comes alive when flown by an experienced pilot. Not limited 

to indoor flying, the airplane has the power to perform even in moderate wind. Plane is pre-printed 

with bright 4-color graphics for easy orientation in the air. Hardware includes fiberglass control 

horns, wire landing gear, wheels, wooden motor mount, wing and fuselage reinforcements. 

Photo-illustrated instructions take you quickly through each step of the assembly. For 4 channels: 

Aileron, Elevator, Rudder and Throttle. A radio with end point adjustments and exponential is 

recommended. Airplane can also be fitted with float set (see item HC1809 below) for water flying. 

Radio ______________ 


6-Ch. Radio, AR6200 RX, 

no servos......................... $199.99 

Three - HTS055 Hitec HS-55 

Servo @ $13.99 ea. .......... $41.97 

Two - HT0099 Hitec 6” Servo 

Extensions @ $5.59 ea. ... $11.18 

EF001 Lightenna “72” 

Micro Antenna ...................... $6.99 

Motor, Prop, Motor Mount ____ 


Brushless Motor .................. $79.99 

PM22002 Radial Mount Set for 

AXI 22 Series Motors ........... $14.99 

P10047 APC 10x4.7 

Slowflyer Prop ....................... $2.70 



Brushless Controller ......... $66.99 

Battery ______________ 


“Pro Lite V2” 20C w/JST .... $29.99 

Charger, PCM Guard _____ 


1-3 Li-Poly Cells ................. $33.99 

Huge 

ailerons and 

large movement 

for 

extreme 3D 

performance 

Elevator 

and 

Rudder 

servos in 

tail for 

precise 

control 

Converts to 

fly off water 

in seconds 

with optional 

float kit 

Fly with or without plug-in main gear 

Super Zoom on Floats 

Live near a Lake Fly Super Zoom off water 

36 

HC1809 Hacker Super Light Floats for 

Super Zoom 4D ................ $26.99 

20” long foam floats and all the necessary 

hardware to easily convert your Super Zoom 

4D for flying off of water. Weight of floats 

including hardware is only 2.2 oz. Small 

amount of assembly required, takes about 30 

minutes. After that it only takes seconds to 

convert from wheels to floats and back again. 


Fiberglass control horns and 

rudder hinges

Lightweight aerobatic and 3D performer 

GR9578 Graupner "Extra 300S Elektro" ARF .... $149.99 


ready to fly weight. Almost-ready-to-fly, ultra-lightweight aerobatic 

trainer with excellent flying characteristics and performance. The 

aircraft is laser cut balsa and plywood with reinforcements fitted at 

highly stressed areas. Fuselage, wings, tail plane and fin are 

factory-built and pre-covered with iron-on film. The canopy and 

upper hatch are removable for access to the flight battery and 

servos. The large wing area makes it a very good-natured, neutral 

flying airplane, capable of all pattern style maneuvers. Two-part 

wing makes it easy to transport and store. Assembly takes 6-8 

hours; the included illustrated instruction manual is clear and takes 

you step-by-step. Decals, lightweight wheels and small accessory 

parts are included. Controls are: Ailerons (2 servos), Rudder, 

Elevator and Throttle. 


Designed as an electric airplane--- Light and easy to fly 

Radio __________________ 

SPM6600 Spektrum DX6i Full Range 

Transmitter w/o Servos MD2 

................................................... $199.99 


@ $13.99 ea. .............................. $55.96 

Two - HT0099 Hitec 6” Aileron 

Extension Cable @ $5.59 ea ... $11.18 

Two - HT0097 Hitec 12” Aileron 

Extension Cable @ $5.99 ea .... $11.98 

Motor, Prop _____________ 

PM281412 Model Motors AXI Gold 

2814/12 Outrunner Motor ......... $94.99 

PE10070E APC 10X7E Prop ....... $2.70 

MJ4703 Collet Prop Adapter for 4mm 

Shaft,M6 ............................................ $4.49 

HLHS150W 1-1/2” Spinner, White .. $2.00 

PM280802 Model Motors Radial Mount 

Set for 2814 ................................ $16.99 

Motor Controller ___________ 


Brushless Controller ................ $99.99 

Battery _________________ 


“Pro Lite V2” 20C LiPoly Pack .. $54.99 

Charger ________________ 

SRC506 IC6 Balance Charger for 1-6 

LiPoly Cells ............................... $75.99 

GR9574 Graupner “Electro Kadett” ARF ...... $199.99 


flying weight. 11 oz. per sq. ft. wing loading. Laser cut 

built-up balsa and plywood construction. The wings are rib 

and spar construction, completely pre-built and 

pre-covered. Motor cowl and wheel pants are pre-finished 

fiberglass. Landing gear is anodized aluminum. Laser cut motor mount is ready for your AXI motor. 

The correct side and down thrust is already built in. Flight battery is easy to install through the hatch 

under the nose. A great second airplane with smooth and predictable flying characteristics. Lots of 

power for short take-offs even from the grass and so light it floats 

in slowly for easy landings. Very stable with a gentle stall and 

quick recovery. As easy to fly as a trainer but with enough power 

to practice more advanced maneuvers. Rolls, loops, inverted, 

even sustained knife-edge is easily accomplished. 

Photo-illustrated instructions are clear; assembly time is about 

4-6 hours. Flight time is about 8-12 minutes. For 4 channels: 

Ailerons (2 servos), Elevator, Rudder and Throttle. 

Radio ______________ 

SPM6600 Spektrum DX6i DSM2 6- 

Ch. Radio, AR6200 Rx, no servos 

........................................... $199.99 

Two-HTS081 Hitec HS-81 Servo 

@ $16.49 ea. ................... $32.98 

Two-HTS225BB Hitec HS-225 Ballbearing 

Servos @ $20.99 ea. ....... $41.98 

Motor, Prop, Spinner _____ 

AM292110 Atlas 2921/10 

OUTRUNNER ..................... $49.99 

PE11070E APC 11X7 E Prop $2.90 

GR1385/45 Graupner 45mm 

Precision Spinner, 5mm Shaft 

.............................................. $18.99 


ABC45 Atlas 45 Amp Brushless 

Controller .......................... $67.99 

Battery _____________ 


Lite V2” 20C LiPoly Pack .. $79.99 

Charger ____________ 

SRC506 IC6 Balance Charger for 

1-6 LiPoly Cells .................. $75.99 


Semi scale T-28 Trojan flies as good as it looks 


Radio 

HTR971B Hitec Laser 4 Channel FM 

with 2HS-322 Servos .................... $129.99 

Four - HTS225BB Hitec HS-225BB Mighty 

Mini BB Servo @ $20.99 ea. .......... $83.96 

Motor, Prop 


OUTRUNNER ................................... $99.99 

GS11080 "G-Sonic" 11-8 Prop ......... $7.79 

GR605350 Graupner Prop Shaft 

Adapter for 5.0mm Shaft ................ $12.79 


ABC45 Atlas Black 45 Amp Brushless 

Controller .......................................... $67.99 

Battery 

TP21004SPL2 4-Cell 14.8V 2100 mAh 

Pro Lite V2 20C ................................ $69.99 

GR9398 Graupner "North American T-28 

Trojan"ARF ................................................. $229.99 

48-3/8" wingspan, 39-1/4" length, 400 sq. in. wing area, 

61-1/2 oz. flying weight. The airplane's performance 

and handling in the air are a testament to its light 

weight. It is built primarily of balsa and plywood with 

reinforcements at high stress points. The two-piece 

wing makes T-28 easy to transport to the flying field and 

reduces storage space. The fuselage, wing and tail panels are supplied ready-made 

and covered in multi-color film. Electric motor mount for AXI motor is included. 

Assembly requires 6-8 hours; an illustrated instruction manual is included. The tricycle 

landing gear makes the ground handling easy. Take-offs are very quick and the climb 

is powerful. The airplane is capable of all basic aerobatic maneuvers and slows well for 

controlled, easy landing. A 4-channel radio system is required. Controls are: Ailerons 

(2 servos), Elevator, Rudder and Throttle. 

Charger 


Balance Charger ............................. $75.99 

Retract landing gear included with airplane 

GR9381 Graupner North American "AT6 

Harvard" ARF ............................................ $229.99 

62-1/4" wingspan, 47-1/4" long, 600 sq. in. wing 

area, 128 oz. flying weight. Construction is 

lightweight conventional balsa and plywood 

completely pre-covered with heat shrink film. The 

control surfaces are pre-hinged and pinned. Wing 

has semi-symmetrical airfoil and the mounts for the mechanical retracts are pre-installed. 

Retracts are included. Quick and easy build will take only 8-10 hours. Airplane is designed 

for a glow engine but performs better with the electric OUTRUNNER. The conversion to 

electric is very easy. The motor mounting hardware is included in our accessory pack. 

Airplane is easy to fly and would make a good intermediate aerobatic trainer. Has a broad 

speed range and slows well for landings. For 5 channels; Aileron (2 servos), Elevator 

(2 servos), Rudder, Retracts, Throttle. 

Radio 

SPM6600 Spektrum DX6i DSM2 6-Ch. 

Radio, AR6200 Rx, no servos ..... $199.99 

Five - HTS0322S Hitec HS-322 Servo 

@ $9.99 ea. ................................... $49.95 

HTS075 Hitec Retract Servo 

HS-75, BB ............................................................. $29.49 

Two-HT0097 Hitec 12" Servo Extension 

@ $5.99 ea. ........................................................... $11.98 


NiCad Pack ........................................................... $27.99 

Motor 

PM413016 "AXI" 4130/16 

OUTRUNNER Brushless Motor .... $164.99 

PM41002 Radial Mount Set for 41 Series 

Motors ........................................... $21.99 


JAP77P Jeti ADVANCE Pro 77 Amp Opto 

Brushless .................................... $175.99 

Prop 

PE14010E 14x10 APC "E" Prop ..... $4.60 

Battery 

Two - TP33003SPL2 3-Cell 11.1V 3300 mAh 

Pro Lite V2 20C @ $79.99 ea. ....... $159.98 

Charger 


Balance Charger ............ $75.99 

38 



Specifically designed for AXI OUTRUNNER motor, easy to build and fly 

RCM513 Tiger Moth 1:7 Scale .......................... $189.99 


flying weight. Totally designed as an electric airplane with 

battery box and motor mount in place. There are only two 

places that require glue in the entire build. The rest is all 

assembled using a screwdriver and small wrench. All flying 

surfaces are pre-hinged and the mounting points for the 

pull-pull hardware are pre-drilled. Complete set of functioning 

flying wires is included. Airplane comes pre-built and pre-covered with all decorations in 

place, can be built in 4-6 hours. AXI motor 

provides lots of power, you will fly at less 

than 1/2 power most of the time. Flies best 

in light wind, slow flight, touch and goes, 

slips to landing -- relaxed flying at its best. 

Instructions included. For 4 channels, 

Ailerons (2 servos), Elevator, Rudder and 

Throttle. 

Radio _____________ 

HTR971B Hitec Laser 4 with 2 

HS-322 Servos ................. $129.99 

Two-HTS081 Hitec HS-81 Servos 

@ $16.49 ea. ...................... $32.98 

Two-HT0097 Hitec 12" Servo 

Extensions @ $5.99 ea. .... $11.98 

HT0096 Hitec Dual Aileron "Y" 

Harness ................................ $9.59 

Motor, Prop, Spinner ______ 

PM282010 AXI 2820/10 


......................................................... $99.99 

PM282002 Radial Mount for 2820 

and 2826 Series AXI Motors ........ $16.99 

PE11055E APC 11x5.5E Prop ........ $2.90 

HLHS175B 1-3/4" Spinner, Black .. $2.10 



Brushless Controller ........... $99.99 

Battery _____________ 

TP33003SPL2 3-Cell 11.1V 


Pack ..................................... $79.99 

Charger _____________ 


Digital Balance Charger ..... $75.99 

Big, elegant and easy to fly 

RCM760 Green Model "Super Tiger Moth" 

........................................................ $399.99 

78" wingspan, 65-3/4" long, 1,842 sq. in. wing area 

(12-3/4 sq. ft.), 14-1/4 lbs. flying weight. The Tiger 

Moth was a primary trainer for thousands of pilots; our 

Super Tiger Moth could train hundreds more. 

Decorated in the DeHavilland School of Flying colors 

and sporting a scale instrument flying hood on the rear 

cockpit, the airplane looks ready for another training 

mission. Beautifully built of balsa and plywood, pre-covered with heat-shrink film. The elevator and 

rudder are pull-pull controlled with a scale appearance. Wings have full wire bracing but once 

assembled they can be detached from the fuselage without having to remove flying wires. This 

makes the airplane much easier to transport and set up. The scale landing gear is completely 

pre-assembled and ready to install. Battery hatch on the bottom of the nose gives easy access to 

the flight batteries. Flight times are over 10 minutes of smooth, graceful flying. For 4-channels: 

Ailerons (2 servos), Elevator, Rudder and Throttle. 

Radio 

SPM2710 Spektrum DX7, 7-Ch., 

AR7000 Rx, 4 DS-821 Servos 

........................................... $349.99 

Two - HT0604 Hitec 12" HD Servo 

Extension @ $6.69 ea. ...... $13.38 

Two - HT0605 Hitec 24" HD Servo 

Extension @ $8.89 ea. ...... $17.78 

ABB450 Switch Mode BEC, 

8-42V ................................... $29.99 

Motor, Prop 

AM5020 Atlas 90 Brushless 

OUTRUNNER ................... $149.99 

PE20010E APC 20x10 E Prop 

............................................. $13.90 


ABC90P Atlas 90 Amp Opto 

Brushless Controller ...... $199.99 

Battery 

Two - TP50005SPL2 5-Cell 18.5V 

5000 mAh Pro Lite V2 20C 

@ $184.99 ea. ................. $369.98 



Charger 


Digital Balance Charger .. $75.99 


Glow/Glow Conversion 

Big…powerful…ELECTRIC aerobatic airplane- suitable for large sailplane aerotow 

GR9378 Graupner Taxi 2400 ARF .................. $539.99 

94-1/4" wingspan, 68" long, 1628 sq. in. wing area, 18 

pound flying weight. Airplane is laser cut built-up balsa 

and plywood construction. Cowl and wheel pants are 

fiberglass, and landing gear is aluminum. Aluminum 

steerable tail wheel unit with pull-pull hardware, special 

flap hinges, pull-pull rudder controls and large spinner 

included. 2-piece wings have internally driven flaps and externally driven ailerons. The 

stabilizer is a 2-piece unit that assembles on an aluminum tube spar, each stab half has 

its own elevator servo. Designed for an OS Max 160 glow or G26 gas motor. For 

superior performance use an AXI 5330/24 OUTRUNNER. The power is amazing, 

sustained knife-edge passes are a breeze; just about any aerobatic pattern maneuver is 

possible. Conversion to electric is easy; included is a full size drawing of the motor box 

that needs constructed. Flight times are 15 to 20+ minutes. Flaps slow the airplane for 

easy landings. Good for aero towing large-scale sailplanes. Clear instructions included. 

For 5 channels: Ailerons (2 servos), Flaps (2 servos), Elevator (2 servos), Rudder and 

Steerable tail wheel and Throttle. 

Radio 

SPM6600 Spektrum DX6i DSM2 6-ch. 

Radio, AR6200 Rx, no servos .. $199.99 

Four - HTS0322S Hitec HS-322 Servo 

@ $9.99 ea. .................................. $39.96 

Three - HTS0635 Hitec HS-635HB Hi 

Torque Servos @ $27.99 ea. ....... $83.97 

Two - HT0605 Hitec 24" Heavy Duty 

Servo Extension @ $8.89 ea. ..... $17.78 





Two - HT0096 Hitec "Y" Harness 

@ $9.59 ea .................................... $19.18 


NiCad ............................................ $27.99 

Motor 

PM533024 AXI 5330/24 Outrunner 

Brushless Motor ......................... $269.99 


JAP90P Jeti ADVANCE Pro 90 Amp 

Opto Brushless ........................... $257.99 

Prop 

PE21014E APC 21 x 14E .............. $13.90 

Battery 

Two - TP50005SPL2 5-Cell 18.5V 5000 mAh 

Pro Lite V2 20C @ $184.99 ea. .. $369.98 

Charger 


Balance Charger .......................... $75.99 

Glow powered Nostalgia Champion Sport flier 

Radio 


6-Ch. Radio, AR6200 Rx, no 

servos ........................... $199.99 

Five - HTS0322S Hitec HS-322 

servo @ $9.99 ea. .......... $49.95 

Two - HT0604 Hitec 12" Aileron 

Extension w/Gold Pins 

@ $6.69 ea. .................... $13.38 

Engine, Prop 

TTR9141 Thunder Tiger 

Pro 46 R/C Aircraft Engine 

....................................... $109.99 

GP10060 Graupner 10-6 Prop 

........................................... $5.30 

40 

GR9393 Graupner "Kwik Fly MK 3" ARF .... $229.99 

60" wingspan, 53" length, 660 sq. in. wing area, 6-3/4 pound 

flying weight. "Kwik Fly MK 3" was originally designed by Phil 

Kraft, the American and ex-World Champion in the 1970’s. 

Conventional all wood built-up construction, with rib and spar 

wings. Covered in red and white heat shrink film. Construction 

is quick. You will need to install the tail, ailerons, rudder and 

elevator, fuel tank, radio system, motor, fixed landing gear and 

control rods. Airplane is set up so that conversion to retractable 

landing gear can easily be accomplished. Using the 

recommended glow engine and prop, Kwik Fly is capable of 

loops, rolls, inverted flight and strong climbs, yet it remains a docile flier in the air. Kit comes with 

a photo-illustrated manual with step-by-step instructions. All necessary hardware, landing gear, 

control horns, push rods and decals are included in the kit. Suggested for intermediate to 

advanced pilots. For 4 channels: Ailerons (2 servos), Elevator, Rudder/Nose Wheel Steering 

and Throttle. 


Micro Pylon Racers 

Indoor pylon bashing at it's best 

HC1298A Hacker “Strega” EPP Mini Reno Racer ARF ......... $59.99 

HC1298B Hacker “Furias” EPP Mini Reno Racer ARF ........ $59.99 

HC1298C Hacker “Rarebear” EPP Mini Reno Racer ARF .... $59.99 

20-1/2” wingspan, 17-1-2” long, 3.8 oz. flying weight. Tough all EPP 

foam airplanes can take terrific crashes that would destroy other 

airplanes and keep right on flying. Ideal for pylon racing in a gym or in 

your backyard. Assembly is quick, all you need is medium CA and some 

kicker. Instructions are easy to follow, illustrated drawings, you can be 

ready to fly in under 2 hours. Potensky’s 20W motor is the perfect 

choice for these racers, providing the right combination of speed in a 

lightweight package. Get together with your friends and have an all out 

Mini Reno Race of your own. No matter who wins, everyone will leave 

with a huge smile on their face. Controls are: Ailerons, Elevator and 

Throttle. 

Radio ______________________ 

HTR48725 Hitec "Neon 3" FM, Micro 05 

Receiver, 2 HS-55 Servos ......................... $69.99 

Motor, Prop ___________________ 

POTM020 Potensky POT 20W OUTRUNNER 

Brushless Motor, 6mm Threaded Shaft ... $74.99 

HLFK5555 4.9 x 4.3 Prop/Spinner ............... $3.30 

Motor Controller _________________ 

JAP08 Jeti ADVANCE Pro 8 Amp .............. $58.99 

Battery ______________________ 

TP3502SJPL2 2-Cell 7.4V 350mAh “Pro Lite V2” 

20C w/JST ................................................... $13.99 

Charger _____________________ 

ETC2020 Smart Charger for 1-3 LiPoly Cells 

...................................................................... $33.99 


Micro Pylon Racers 

Pylon racer is quick to build and even faster to fly 

GR9554 Graupner "Nemesis" ARF .............................. $59.99 

25-1/4" wingspan, 22-1/4" long, 113 sq. in. wing area, 8-1/2 oz. flying 

weight. All molded high-density styrofoam construction. Wing has 

molded-in carbon tube spar for added strength. Nemesis is an ideal 

practice plane for pylon racing with a Speed 300 brushed motor or an 

Inline 400 brushless motor. With the recommended motor and prop, 

Nemesis is very fast yet control response is precise with no bad 

tendencies. Designed for intermediate to advanced pilots. No painting is 

required. Battery access is easy with quick-release magnetic hatch. 

Controls are Ailerons, Elevator and Throttle. Included are detailed 

illustrated step-by-step buildinginstructions, decals and assorted small 

hardware. Average build time is approximately 6 hours. 

Radio 

SPM2720 Spektrum DX7 DSM2 7-Ch. 

Radio, MicroLite Rx, 3 DS-285 Servos 

............................................................ $339.99 

Motor, Prop 

GR6531 Graupner Inline 400 8.4V 

Brushless Motor ................................ $97.99 

GPF04740 Graupner 4.7x4 CAM Speed 

Prop, 4.8mm bore ................................ $5.49 

GR6033/23 Graupner 28mm Precision 

Spinner for 2.3mm Shaft ................... $38.99 


GR7183 Graupner 12A Compact Control 

w/BEC ................................................. $67.99 

Battery 

TP9102SJPL2 2-Cell 7.4V 910 mAh Pro Lite 

V2 20C ................................................. $21.99 

Charger 


balance Charger ................................ $75.99 

Semi-scale motor glider for powered or thermal flying 

RCM625 Super Dimona 2400 ... $159.99 

94-1/2" wingspan, 43" long, 625 sq. in. wing 

area, 65 oz. flying weight. The factory did 

the hard work for you. Fuselage, wheel 

pants and winglets are gel-coated fiberglass. 

Wings and stabilizer are pre-built and 

covered conventional wood construction. 

Flying surfaces are pre-hinged. Servo mounts, landing gear mounts, pushrods and 

wing connecting spar tube are pre-installed. The nose gear is steerable. Assembles 

quickly, clear photo-illustrated instructions. Removable clear canopy and cockpit interior 

provides easy access to the equipment and flight batteries. Powered as we recommend 

the model will take off of a short runway and climb steeply. Turn the motor off 

and enjoy the thermal performance. Flight times of over 30 minutes are easily 

achieved with a little thermal help. Easy to build and fly. For 4 channels: Ailerons (2 

servos), Elevator,Rudder (and nose wheel steering), and Throttle. 

Radio 

HTR971B Hitec Laser 4 FM, 

2 HS-322 Servos ................................. $129.99 

Two-HTS055 Hitec HS-55 Servos 

@ $13.99 ea. ......................................... $27.98 

Two-HLAE320 24" Servo Extensions 

@ $4.99 ea. ............................................. $9.98 

HT0096 Dual Aileron "Y" Harness ........ $9.59 

Motor, Prop, Spinner 


Brushless Motor ................................... $99.99 

HLAN2954 10.5x6 Carbon Prop ............. $9.60 

GR1385/42 42mm Precision Spinner, 

5mm Shaft, 8mm Prop Hole ................ $22.99 



Brushless .............................................. $99.99 

Battery 

TP33003SPL2 3-Cell 11.1V 3300 

mAh Pro Lite V2 20C ........................... $79.99 

Charger 


Balance Charger .................................. $75.99 

42 


Electric Sport and Sailplane 

Self-launching sailplane with V-tail, Ailerons and Flaps 

GR4546 Graupner Cumulus XXL Sailplane .................................................... $289.99 

88-5/8" wingspan, 42-3/4" long, 652-1/2 sq. in. wing area, 58 oz. flying weight. The airfoil 

section is a GQ/W 10%; the V-tail is a flat plate and is removable. Cumulus XXL is a 

beautifully coordinated glider with a light touch and precise handling. The exceptional 

handling is most noticeable on the landing approach, where it can be flown slowly. The 

airplane has full-length camber changing flaps, which can be deflected up as well as down 

for a broad speed range. By deflecting the flaps up it is better able to penetrate a downdraft 

and punch through to areas of lift. We powered our Cumulus XXL with an OUTRUNNER for 

powerful climbs to thermal altitude. With a little thermal assistance you can fly all day on a 

single battery. Fuselage is gel-coated epoxy glass. The wings and tail are built-up balsa and 

ply construction pre-covered in opaque and transparent heat shrink covering. Instructions 

are clear and assembly will take 12-15 hours. For 6 channels: Ailerons (2 servos), Flaps, 

V-Tail (2 servos), Throttle. 

Radio 

SPM6600 Spektum DX6i DSM2 6-Ch. 

Radio, AR6200 Rx, no servos 

.................................................. $199.99 


@ $16.49 ea. ............................ $49.47 

HTS085MG Hitec HS-85 Metal 

Gear Servo ............................... $30.99 

Two - HT0605 Hitec HD 24" 

Extensions@ $8.89 ea. ........... $17.78 

Motor, Prop 

PM282012 AXI Gold 2820/12 

OUTRUNNER ............................ $99.99 

DKT4050 40mm Turbo Spinner, 

5mm Shaft ................................. $24.99 

HLAN3461 13x10 Cam Carbon 

Prop Blades .............................. $14.30 



Brushless .................................. $99.99 

Battery 


Pro Lite V2 20C ......................... $79.99 

Charger 


Balance Charger ....................... $75.99 

Self-launching sailplane—Fly all day on a single charge 

HLAN1318 Aero-naut "Aero-Master" 

ARC ......................................................... $319.99 

97-3/4" wingspan, 49-3/4" long, 685 sq. in. wing 

area, 58 oz. flying weight. Over 8-foot wingspan 

sailplane with a wing loading of about 12 oz/sq.ft. 

and enough power to climb to thermal altitude in 

seconds. Gloss gel-coated lightweight fiberglass 

fuselage with a perfect finish, no painting required. 

Wings are of built up construction with full balsa 

sheeting, lightweight and strong. Ailerons are pre-cut in the outer wing panels as is the 

location for the aileron servo. Outer and inner wing panels must be glued, a carbon joiner is 

provided. Wings slip onto steel joiner rods and are removable for easier transport and storage. 

Stabilizer and elevator are attached to the fin by screws and are removable. The large tinted 

canopy gives you great access to the flight batteries and the radio components. Assembly is 

aided by clear line drawings with all the important dimensions shown. Motor is easily installed 

in the power pod through the access hatch on top. Wings, Stabilizer and Rudder must be 

covered with heat shrink covering. Sailplane is easy to hand-launch and can even 

"Rise-off-Ground" if the grass is short. Climbs are steep, taking the sailplane to thermal 

altitude in 15 to 30 seconds and there is enough power in the batteries to give climb after 

climb. With just a small amount of thermal help, hours of soaring flight are possible from a 

single charge. For 4-Channels: Ailerons (2 servos), Elevator, Rudder and Throttle. 

Radio 

SPM6600 Spektrum DX6i DSM2 6-Ch. 

Radio, AR6200 Rx, no servos 

................................................ $199.99 

Two - HTS081 Hitec HS-81 Micro 

Servo @ $16.49 ea. .............. $32.98 

Two - HTS085 Hitec HS-85 BB 

Micro Servo @ $23.49 ea. ..... $46.98 


@ $6.69 ea. ............................. $13.38 


@ $8.89 ea. ............................. $17.78 

Motor, Motor Controller 

PM282012 AXI 2820/12 

OUTRUNNER Motor ............... $99.99 


Brushless ................................ $99.99 

Prop 

HLAN4233 Aeronaut 3 Blade 

Middlepart Yoke, 47mm ......... $28.50 

Two - HLAN3423 Aeronaut 9x7 

Prop Blades @ $13.10 ea. ..... $26.20 

HLAN5535 Aeronaut 42mm 3-Blade 

Spinner, 5mm Shaft ............... $34.20 

Battery 


Pro Lite V2 20C ..................... $79.99 

Charger 


Balance Charger ................... $75.99 


Sailplane 

Beautiful "Full-House" motorized sailplane thermals in the lightest lift 

MPX4218 Multiplex "Cularis" Electric Glider ......................... $194.99 

102-3/4" wingspan, 49-1/2" long, 853 sq. in. wing area, 3 lbs. 

7 oz. flying weight. Fuselage and wings are made of "Elapor" (tough 

expanded bead foam) for strength and durability. Wings and tail are 

removable, unique push button connectors hold theflying surfaces 

securely but unsnap for easy transport and storage. Includes wing 

assembly jig. The suggested motor, prop and battery will provide nearly a 

dozen strong climbs to thermalaltitudes. Battery access is through the 

canopy. The ailerons and flaps have independent servos. 

This is a "Full-House" thermal duration sailplane and can 

be programmed for all of the functions that this type of 

sailplane uses: full span camber (for better climb in thermals), 

full span reflex (to speed out of sinking air), crow 

(ailerons up and flaps down). Can also be built as a pure 

(non-powered) sailplane and includes a nose with a place 

for an aero-tow nose release. Great instructions included. 

Best for intermediate to experienced builders. For 7 channels: 

Ailerons (2 servos), Flaps (2 servos), Elevator, 


Radio ____________ 

SPM2710 DX7 DSM2 7-Channel, 

AR7000 Rx, 4-DS821 Digital 

Servos ................................. $349.99 

Two - HTS055 Hitec HS-55 Sub 

Micro Servo @ $13.99 ea .... $27.98 

Two - HTS056 Hitec HS-56 HB Sub 

Micro BB Servo @ $24.99 ea. ............... $49.98 

Two - HTS081 Hitec HS-81 Micro 

Servo @ $16.49 ea. ................................ $32.98 

Four - HT0097 Hitec 12" Aileron Extension 

@ $5.99 ea. ............................................. $23.96 

Two - HT0099 Hitec 6" Aileron Extension 

@ $5.59 ea. ............................................. $11.18 

Two - HLAE320 24" Extension for 

Hitec/JR @ $4.99 ea. .......... $9.98 

Motor, Prop _________ 

PM282012 AXI 2820/12 

OUTRUNNER Motor .......... $99.99 

HLAN5150 Aeronaut 50mm (2") Spinner 

................................ $6.20 

HLAN2409 Aeronaut 5mm Prop Shaft 

Adapter ..................................................... $8.60 

HLAN4224 Aeronaut 52mm Middlepart 

Yoke ........................................................ $13.90 

HLAN3458 Aeronaut 13x6.5 Carbon CAM 

Prop Blades ........................................... $14.30 



Brushless ............................... $99.99 

Battery ____________ 


“Pro Lite V2” 20C .................. $47.99 

Charger ___________ 

HT9253 Multiplex Multicharger 

LiPo/Ni Charger ................ $74.99 

NEW! Outstanding price includes brushless motor and prop assembly 

Radio –––––––––––––––––––––– 

SPM5500 DX5E DSM2 5 Channel, 

AR5 .........................................… $99.99 

Two – HTS055 Hitec HS-55 Sub Micro 

Servo@ $13.99 ……................... $27.98 

Motor, Prop ––––––––––––––––– 

Included 

Motor Controller ––––––––––––– 

JAP40 Jeti Advance Pro 40 Amp 

Brushless ……......................…. $99.99 

Battery ––––––––––––––––––––– 

CGR76422 2-Cell 7.4V 2100 mAh 

LiPoly ............................……….. $43.90 

Charger –––––––––––––––––––– 

HT9253 Multiplex Multicharger LiPo/Ni 

Charger ……........................…. $74.99 

CGR452 Graupner Elektro Junior S ...................................................................... $119.99 

74.8” wingspan, 44” long, weighs 28 ounces. Almost Ready to Fly model assembled from Graupner SOLIDPOR high-density foam components. 

Includes a Graupner COMPACT-345 Z 7.4 V brushless motor as standard. Features: CNC-trimmed carbon-look canopy included, includes readymade 

ABS components, including motor mount, spinner and CAM FOLDING PROP, two-part wing with CFRP spar, no painting required, detailed 

building instructions with photos. The Elektro Junior S has an impressive appearance with T-tail, outstanding climb performance with the standard 

power system, and the model has excellent gliding characteristics with the motor switched off. 

44 


Twister Helicopters 

Completely built, painted, and test-flown RC Helicopter - NO previous RC experience necessary 

JP1201 Twister "ARMY" Co-Axial RC Helicopter 

................................................................................. $99.99 

JP1202 Twister "US Coast Guard" Co-Axial RC 

Helicopter................................................................ $99.99 

340mm (13-3/8") rotor diameter, 435mm (17-1/8") length, 230g (8-1/4 oz.) flying weight. Comes with a 4 Channel 

72 MHz FM R/C Transmitter, 7.4V 2-cell 800 mAh lipo battery, lipo battery balance charger, piezo electronic gyro 

stabilization, 2 extra sets of main rotor blades, and an instructional flight training DVD. Flight duration is 10-15 

minutes per charge. Whether you prefer the famous orange and white colors of the US Coast Guard version or 

the camouflage of the Australian Army version, you can't go wrong with these easy to fly, flight-tested co-axial RC 

helicopters. From the authentic oleo landing gear detail to the canted 4-blade tail rotor, these beautifully crafted 

scale masterpieces look so realistic in flight that you can almost feel the "whump"' of the rotor blades and smell 

the exhaust haze! Both R/C helicopters are completely suited to people with no R/C flying experience. 


JPS0291 7.4V 800 mAh LiPo Battery ....................... $19.99 

Factory assembled, the world’s first RTF tandem rotor R/C helicopter 

Swash links 

Easy Access 

Battery Location 

JP1260 Twister SkyLift Tandem Rotor RTF Helicopter ............ $149.99 

340mm (13-3/8") main rotor diameter, 500mm (19-3/4") fuselage length, 400g 

(14-1/8 oz.) flying weight. SkyLift comes with a 4 Channel 72 MHz FM R/C 

Transmitter, 3-cell 11.1V 800 mAh Lipo battery, Lipo battery balance charger, piezo 

electronic gyro stabilization, 2 extra sets of main rotor blades, and an instructional 

flight training DVD. Flight duration is approximately 5 minutes per charge. Includes a 

free PC flight simulator cable. The Twister SkyLift is the world's first RTF 

(ready-to-fly) tandem rotor semi-scale RC helicopter! Designed to give absolute 

newcomers and sport pilotsthe ultimate thrill - never before achievable - in RC model 

helicopter flight! Up until now, tandem rotor helicopters were considered hugely 

expensive and difficult to fly - strictly for experts only. 


JPS0292 11.1V 800 mAh 3-Cell LiPoly Battery ......... $29.99 

Mouse Pad doubles as 

landing pad for micro 

helicopters 

Flybar Snaps in 

GR8278 Graupner “Heli Pad” 

Mouse Pad Landing Platform 

............................................ $6.99 

Approximately 8” x 9” x 3/32” thin. 

Dual Purpose pad with a hard PVC film surface and soft 

foam backing. Practice spot landing your micro helicopter 

on this "Heli Pad". 


E-flite Helicopters 

An Ultra-Micro RC Helicopter anyone can fly - no experience needed 

EFLH2200 E-Flite "Blade MCX" Ready-To-Fly 

Ultra Micro RC Helicopter .............................................. $119.99 

EFLH2280 E-Flite "Blade MCX" Bind-N-Fly 

Ultra Micro RC Helicopter ............................................... $89.99 

7-1/2" rotor diameter, nearly 8" long, 1 oz. (28 grams!) flying weight. Blade 

MCX is 100% factory-assembled, test-flown and ready-to-fly, no assembly 

or setup required. It can be flown just about anywhere: an office, a living 

room, a small bedroom, a garage, or in your kitchen. Coaxial, 

counter-rotating rotor head design cancels out the torque effect that makes 

flying RC helicopters so difficult. ELFH2200 is Ready-to-fly with everything 

included: 4-channel transmitter equipped with Spektrum 2.4 GHz DSM2 

technology, digital trims and dual rates, factory installed 5-in-1 control unit 

with Spektrum 2.4 GHz DSM2 compatible receiver, main motor speed 

controls, mixer, gyro, fully proportional servos, LiPo battery, battery 

charger, and AA batteries. EFLH2280 includes everything except for the 

transmitter and can be bound to any DSM2 equipped radio. Spektrum 

DSM2 radio technology eliminates interference so you can fly multiple 

helicopters at the same time. Blade MCX's ultra-micro size and weight are 

perfect for indoor flying (or outdoors if there is no wind). Install the 

AA batteries, charge the flight battery (takes approximately 20 

minutes) and go fly. No gluing or painting required. Hobby-Lobby 

stocks a full line of Blade MCX Spare Parts and Upgrades. 

EFLH2300 E-Flite Blade mCX S300 RTF 

Ultra Micro Helicopter ..................................... $99.99 

EFLH2380 E-Flite Blade mCX S300 Bind-N-Fly 

Ultra Micro Helicopter ..................................... $79.99 

Want more flight time Be 

sure to stock up on extra 

batteries. 

EFLB1101S 110 mAH 3.7V Lipoly 

Battery .............................. $7.49 

NEW! Fast, Agile, Fun - the “next step” heli after coaxial 

EFLH3000 E-Flite Blade mSR RTF 

Ultra Micro Heli ................................................................ $179.99 

EFLH3080 E-Flite Blade mSR Bind-N-Fly 

Ultra Micro Heli ................................................................ $149.99 

Weighing in at less than one ounce, the nimble Blade mSR takes your 

ultra-micro helicopter performance to the next level. It comes from the 

factory completely assembled and flight-tested. At the heart of the Blade 

mSR’s design is a Bell-Hiller rotor head that provides the kind of speed and 

agility you would expect of a single-rotor heli but maintains a measure of 

positive stability similar to a co-axial heli. This blend of agility and stability 

makes it the ideal “next step” for someone moving up from a coaxial heli, 

such as the Blade CX3 or Blade mCX. EFLH3080 includes everything 

except for the transmitter and can be bound to any DSM2 equipped radio. 

Hobby-Lobby stocks a full line of Blade mSR parts. 

Want more flight time Be sure 

to stock up on extra batteries. 

EFLB1501S 150 mAH 3.7V Lipoly 

Battery ............................. $12.99 

46 


E-flite Helicopters 

NEW! Beginner-friendly RC Heli with Spektrum technology 

EFLH1250 E-Flite Blade CX2 RTF CoAxial Micro Heli .. $179.99 

13.6” rotor diameter, 16.4” long, 8 oz. flying weight. The Blade CX2 comes 

out of the box RTF (Ready-to-Fly) so the only waiting you’ll have to do once 

it arrives is for the battery to charge. Once you get in the air you’ll find that 

the combination of the co-axial blades and the updated 3-in-1 control unit 

(main motor mixer, speed controls, gyro) give it stability that’s unmatched 

by other RC helicopters on the market in the same size and class. The CX2 

also comes with a 2.4GHz DSM radio system that allows you to fly 

anywhere without fear of interference or sudden loss of control. 

Hobby-Lobby stocks a full line of Blade CX2 parts. 

NEW! E-Flite’s first heading lock gyro coaxial helicopter 

EFLH2000 E-Flite Blade CX3 MD-520N RTF Heli .................... $199.99 

EFLH2080 E-Flite Blade CX3 MD-520N Bind-N-Fly Heli ......... $169.99 

13-1/2” rotor diameter, 16-1/2” long, 8 oz. flying weight. This indoor 

helicopter is 100% factory-assembled, test flown and ready to fly out of the 

box, no assembly or setup required. It can be flown just about anywhere: 

an office, a living room, a small bedroom, a garage, or in your kitchen. 

Spektrum DSM2 radio technology eliminates interference. Blade CX3 is 

the first coaxial heli to incorporate a heading-lock gyro, a Spektrum DSM2 

2.4 GHz radio system, and a scale body all in one convenient ready-to-fly 

package. A Blade CX3 Bind-N-Fly Version is available for RC pilots who 

already have a 2.4 GHz DSM2 transmitter. Hobby-Lobby stocks a full line 

of Blade CX3 Spare Parts and Upgrades. 

NEW! A New Level of Micro-Heli 3D Aerobatic Performance 

EFLH1375 E-Flite Blade CP Pro 2 PNP Heli ................ $169.99 

The Blade CP Pro 2 PNP is a micro electric R/C helicopter able to perform 

a variety of 3D aerobatics such as inverted flight, backward hurricanes, piro 

flips and more right out of the box - just add your own transmitter, 

receiver, battery and charger. It’s designed to give intermediate to 

advanced heli pilots an experience like no other. Its feature-packed design 

offers a level of quality and performance beyond that of all similar class 

models. This allows intermediate pilots to perfect their skills quickly and 

experienced pilots to enjoy maximum performance with no extra effort. The 

factory-installed high-power 370 main motor offers brushless-like 

performance, while the direct-drive N60 tail motor and G110 heading lock 

gyro offer incredibly locked-in tail control. A 2-in-1 control unit offers 

complete control of the main and tail motors, while three DS75 digital 

sub-micro servos deliver precise CCPM control of the Bell-Hiller mixing 

equipped rotor head. From its feature-packed design to the level of quality 

and performance, intermediate to advanced pilots will enjoy testing their 

aerobatic skills on the Blade CP Pro 2 PNP. 

Radio –––––––––––––––––––––––– 

SPM5500 DX5e Full Range Transmitter, AR500 Rx, no servos ................ $99.99 

Battery –––––––––––––––––––––––– 

TP9103SJPL2 Pro Lite V2 3 Cell 910 mAh 20C w/JST Connector ........... $41.99 

Charger –––––––––––––––––––––––– 

ETC2020 Smart Charger for 1-3 Li-Poly Cells ........................................... $33.99 

Full line of E-flite 

Parts available online 


GAUI 

Advanced Helicopters 

NEW! 3D Performance on a Micro Sized Budget 

Established in Taiwan in 1996, Gaui has dedicated itself fully to 

designing, developing, and manufacturing innovative R/C helicopter 

products. The Hurricane line has made a name for itself in the 

high-end helicopter market over the last several years. Gaui delivers 

the ultimate in performance with careful attention to detail and 

superior craftsmanship. There are 3 sizes in the Hurricane line to 

choose from to fit your personal needs and flying style. The Hurricane 

200 V2 is a tiny micro size heli that performs as well as larger 400 

class products. The Hurricane 425 has been newly designed by 

world-class heli pilot Bobby Watts and is capable of the most extreme 

3D aerobatics in its stock form. The Hurricane 550 is similar in size to 

most .30 sized helicopters and uses economical lipo batteries. If 

you’re stepping out from a fixed or collective pitch trainer helicopter 

and looking for the ultimate machine to take your skills to the next 

level, then we have a Gaui helicopter for you. 

GAU203919 Gaui Hurricane 200 V2 ........................ $229.99 

GAU203917 Gaui Hurricane 200 V2 Combo A ....... $379.99 

GAU203918 Gaui Hurricane 200 V2 Combo B ....... $289.99 

GAU203922 Gaui Hurricane 200 V2 SX .................. $255.99 

428mm Main rotor diameter, 415mm long, 10.5 oz. flying weight. Gaui 

blends quality, performance, and economy in every detail of the 

Hurricane 200 V2. It is fully 3D capable on a 2 cell lipo where other 

micro helis require a 3 cell lipo. All kits come with a 5600Kv motor, 18A 

ESC, and 200mm carbon blades. Combo B (GUA203918) adds in 

three cyclic servos, and Combo A (GAU203917) includes 4 servos and 

the GU-210 heading hold gyro. The all-aluminum head, swashplate, 

and tail box provide slop-free control. Includes a longer flybar for extra 

3D performance as well as a new lightweight painted fiberglass canopy. 

The SX version (GAU203922) includes carbon fiber frames and the 

aluminum parts are anodized in silver. Flying time is 5-6 minutes with a 

2-cell 800mAH Lipo battery (not included). Hobby Lobby stocks a full 

line of replacement parts. 

Radio ––––––––––––––––– 

SPM2722 DX7 DSM2 7-Ch. MicroLite Heli 

Radio, 3-DS285 Digital Servos ............. $339.99 

Motor –––––––––––––––– 

Included in kit 

Motor Controller –––––––– 


Gyro ––––––––––––––––––– 

GAU924210 GU-210 Heading Hold 

Gyro ...................................................... $65.99 

(Not required for GAU203917) 

HTS35045 HS-5045HB Digital Sub 

Micro Servo .......................................... $39.99 

(Not required for GAU203917) 

Battery –––––––––––––––––– 

TP9102SJPL2 Pro Lite V2 2 Cell 

910 mAh20C w/JST Connector .......... $21.99 

Charger ––––––––––––––––––– 


Li-Poly Cells ......................................... $33.99 

Frame Parts 

GUA203183 High Rigidity Landing Gear Brace Set . . . . . . . . $3.50 

GUA203262 Landing Gear Skids Pack (Silver anodized) . . . $2.95 

GUA203329 Swashplate Guide . . . . . . . . . . . . . . . . . . . . . . . . $1.95 

GUA203447 H200V2 Black Upper Frame Set . . . . . . . . . . . . $16.95 

GUA203448 H200V2 Black Lower Frame Set . . . . . . . . . . . . $23.50 

GUA203450 H200 Body Retainers Pack . . . . . . . . . . . . . . . . . $1.95 

GUA203634 CNC Mast Mount . . . . . . . . . . . . . . . . . . . . . . . . . $6.95 

GUA203635 CNC Integrated Middle Mount . . . . . . . . . . . . . $13.50 

GUA203636 CNC Motor Mount . . . . . . . . . . . . . . . . . . . . . . . . $9.95 

GUA203209 H200 Tail Boom Support Set (Long) . . . . . . . . . $3.95 

GUA203110 Stabilizer Blades Pack . . . . . . . . . . . . . . . . . . . . $2.95 

GUA203180 Landing Gear Brace Set . . . . . . . . . . . . . . . . . . $3.50 

GUA203230 Mast Collars Pack (S) . . . . . . . . . . . . . . . . . . . . . $1.50 

GUA203231 Mast Collars Pack (L) . . . . . . . . . . . . . . . . . . . . . $1.50 

GUA203233 Upper Mast Collar . . . . . . . . . . . . . . . . . . . . . . . . $2.50 

GUA203261 Landing Gear Skids Pack (Titanium anodized) . $2.95 

GUA203445 H200V2 Upper Frame Set (for 6g~9g Servo) . . $21.95 

GUA203446 H200V2 Lower Frame Set . . . . . . . . . . . . . . . . $26.95 

GUA203462 H200 CNC Central Base . . . . . . . . . . . . . . . . . . $15.50 

GUA203470 H200 Shaft Driven Conversion Set . . . . . . . . . $55.00 

GUA203471 H200V2 Shaft Driven Conversion Set . . . . . . . $59.95 

GUA203531 Boom Supports Pack . . . . . . . . . . . . . . . . . . . . $3.50 

GUA203570 CNC Swashplate Assembly . . . . . . . . . . . . . . . $19.95 

GUA203571 Balls & Extension for CNC Swashplate . . . . . . $3.50 

GUA203572 Mini Spacer & Brass Washer Spare Pack . . . . . $2.50 

GUA203612 H200 Frames Set . . . . . . . . . . . . . . . . . . . . . . . . $73.50 

GUA203613 H200V2 Frames Set . . . . . . . . . . . . . . . . . . . . . $79.95 

GUA203616 H200 Lower Frame Conversion Set . . . . . . . . . $29.95 

GUA203632 CNC Universal Battery Plate . . . . . . . . . . . . . . . $6.95 

GUA203650 CNC Universal Battery Plate (Silver anodized) . .$6.95 

GUA203680 CF Landing Gear Brace and Skid Set-Silver . . $13.50 

GUA203846 H200 Skid Damper Rubber Pack . . . . . . . . . . . . $1.50 

Head Parts 

GUA203222 Long Main Shafts Pack . . . . . . . . . . . . . . . . . . . . $3.95 

GUA203240 Flybars Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.50 

GUA203241 Flybar Adaptors Pack . . . . . . . . . . . . . . . . . . . . . $1.95 

GUA203640 CNC Mixing Arms (Black anodized) . . . . . . . . . $16.95 

GUA203642 CNC See-Saw Set (Black anodized) . . . . . . . . . $14.95 

GUA203643 CNC Washout Base & Arms Assembly . . . . . . .$24.95 

GUA203645 CNC Main Grips set for 100~200 class . . . . . .$26.50 

GUA203647 CNC See-Saw Spindle (Black anodized) . . . . . . .$3.95 

GUA203648 CNC Stop Plate for 100~400 class . . . . . . . . . . .$4.95 

GUA203849 Spindle shafts Pack for SSD Main Rotor Yoke . .$3.50 

GUA203115 Stabilizer Blades (35x19 mm) . . . . . . . . . . . . . . $2.95 

GUA203641 CNC Swashplate Assembly (Black) . . . . . . . . . $19.95 

GUA203852 Spindle Shafts H200V2 Main Rotor Yoke . . . . . . $3.50 

GUA203242 Flybar Adaptors (Stable Mode) . . . . . . . . . . . . . $1.95 

GUA203243 Long Flybars Pack (136mm) . . . . . . . . . . . . . . . . $2.50 

GUA203560 CNC Main Grips set (for 100~200 class) . . . . . $26.50 

GUA203580 CNC Mixing Arms . . . . . . . . . . . . . . . . . . . . . . . $16.95 

GUA203581 CNC Washout Base . . . . . . . . . . . . . . . . . . . . . . $4.95 

GUA203591 CNC Washout Base & Arms Assembly . . . . . . $24.95 

GUA203620 CNC See-Saw Set . . . . . . . . . . . . . . . . . . . . . . . $14.95 

GUA203625 CNC See-Saw Spindle . . . . . . . . . . . . . . . . . . . . $3.95 

GUA203646 Main Rotor Yoke with Stop Plate . . . . . . . . . . . $26.95 

GUA203689 H200V2 CNC Rotor Head & Swash Ass’y . . . $108.50 

48 



NEW! Tiny Flybarless Heli for 3D performance 

GAU203933 Gaui Hurricane 200 V2 XFES Combo .................................. $385.99 

428mm Main rotor diameter, 415mm long, 10.5 oz. flying weight. Experience flybarless 

3D performance in a micro sized package. Gaui is known for high quality products and 

that is shown throughout the Hurricane 200 V2 XFES with carbon fiber main frames, 

CNC aluminum head and tail box, and the lightweight painted fiberglass canopy. These 

come 95% factory assembled and include the 5600Kv motor, 18A ESC, 200mm SP 

blades and the GU-365 FES (Flybarless E-Stabilizer System) gyro. Flying time is 5-6 

minutes with a 2-cell 800mAH Lipo battery (not included). Hobby Lobby stocks a full 

line of replacement parts. 

Radio –––––––––––––––––––––– 

SPM2722 DX7 DSM2 7-Ch. MicroLite 

Heli Radio, 3-DS285 Digital Servos 

....................................................... $339.99 

HTS35045 HS-5045HB Digital Sub 

Micro Servo ................................... $39.99 

Motor ––––––––––––––––––––– 


Motor Controller ––––––––– 


Gyro ––––––––––––––––––– 


Battery ––––––––––––––––– 

TP9102SJPL2 Pro Lite V2 2 Cell 910 mAh 

20C w/JST Connector .................... $21.99 

Charger –––––––––––––––––––– 


Li-Poly Cells .................................. $33.99 

GUA203850 SSD Main Rotor Yoke . . . . . . . . . . . . . . . . . . . . $21.50 

GUA203851 Main Rotor Yoke with Stop Plate . . . . . . . . . . . $26.95 

Tail Parts 

GUA203125 H200SD Tail Output Shaft Set . . . . . . . . . . . . . . $2.50 

GUA203135 Tail Hubs Pack . . . . . . . . . . . . . . . . . . . . . . . . . . $2.95 

GUA203223 H200 Alu Tail Driven Shaft with Bevel Gear . . . . $2.50 

GUA203596 CNC Tail Pitch Link Set . . . . . . . . . . . . . . . . . . . $11.50 

GUA203598 CNC Tail Slider Set (with double B.) . . . . . . . .$13.50 

GUA203630 CNC Tail Rotor Grip (with Hub) Set . . . . . . . . . $21.95 

GUA203667 CNC Alu Tail Gear Case for Shaft version . . . .$34.95 

GUA203676 CNC Alu Tail Gear Case for Belt version . . . . .$34.95 

GUA861902 Tail Rotor Belt (for H200 Series) . . . . . . . . . . . . . $4.95 

GUA203609 Longer Fin (E Type)-Black . . . . . . . . . . . . . . . . . $4.95 

GUA203080 Tail Rotor Blades Pack . . . . . . . . . . . . . . . . . . . . $2.95 

GUA203085 High Performance Tail Rotor Blades (38mm) . . $2.95 

GUA203130 Tail Rotor Grip (with Hub) Set . . . . . . . . . . . . . . $4.50 

GUA203151 Guide Wheels with B. Pack . . . . . . . . . . . . . . . . $3.95 

GUA203191 Titanium Tail Booms Pack (for Belt version) . . .$3.50 

GUA203192 H200 Sliver Tail Booms (for Belt version) . . . . . $3.50 

GUA203197 Titanium anodized Tail Boom (for Shaft version) . .$2.50 

GUA203584 CNC Tail Support Clamp (Titanium anodized) . . . $14.95 

GUA203586 Double Lever Set (for tail pitch control) . . . . . . $4.50 

GUA203587 CNC Front Tail Case (for Belt version) . . . . . . . $14.95 

GUA203588 CNC Front Tail Case (for Shaft version) . . . . . . $14.95 

GUA203599 CNC Double B. Tail Slider Set . . . . . . . . . . . . . . $6.95 

GUA203600 Double B. Tail Slider Set . . . . . . . . . . . . . . . . . . . $4.95 

GUA203601 CF Fin & Tail (A Type)-Black . . . . . . . . . . . . . . . . $9.95 

GUA203602 CF Fin & Tail (B Type)-Black . . . . . . . . . . . . . . . $11.50 

GUA203603 CF Fin & Tail (A Type)-Silver . . . . . . . . . . . . . . . $9.95 

GUA203604 CF Fin & Tail (B Type)-Silver . . . . . . . . . . . . . . . $11.50 

GUA203605 CF Fin & Tail (C Type)-Silver . . . . . . . . . . . . . . . $9.95 

GUA203608 CF Fin & Tail (D Type)-Silver . . . . . . . . . . . . . . . $11.50 

GUA203619 FRP Fin & Tail (D Type)-Black . . . . . . . . . . . . . . $8.50 

GUA203633 CNC Tail Boom Clamp . . . . . . . . . . . . . . . . . . . . $9.95 

GUA203644 CNC Tail Rotor Grip with Hub Set (Black) . . . . $21.95 

GUA203649 H200 CNC Tail Frame Set (Black anodized) . . . . $8.95 

GUA203660 CNC Tail Gear Case Set (for Shaft version) . . . $31.50 

GUA203665 CNC Alu Tail Gear Case (for Shaft version) . . . $34.95 

GUA203670 CNC Tail Gear Case Set (for Belt version) . . . . $26.95 

GUA203675 CNC Alu Tail Gear Case (for Belt version) . . . . $34.95 

GUA203677 H200 CNC Tail Frame Set . . . . . . . . . . . . . . . . . . $8.95 

GUA861901 Tail Rotor Belt (for EP100 Series) . . . . . . . . . . . $4.95 

Main Blades 

GUA203306 Main Rotor Blades Pack (W. 200L) . . . . . . . . . . . $8.50 

GUA203308 SP Main Rotor Blades (200L) . . . . . . . . . . . . . . . $8.50 

GUA203312 FRP Main Rotor Blades (200L) . . . . . . . . . . . . $21.50 

GUA203313 Main Rotor Blades Pack (W. 205L) . . . . . . . . . . . $8.50 

GUA203314 CF Main Rotor Blades (200L) . . . . . . . . . . . . . . $24.95 

GUA203315 Black SP Main Rotor Blades (200L-High Rigidity) . $8.50 

Accessories 

GUA944101 H200 Series Aluminum Case . . . . . . . . . . . . . . $29.95 

GUA944001 Micro Pitch Gauge (for 100~400 class) . . . . . . $15.95 

GUA946001 Flashlight Set (7.4v~11.1v) . . . . . . . . . . . . . . . . $19.95 

GUA910011 Blade Support (for H100~H200) . . . . . . . . . . . . . $2.95 

GUA910020 Reusable Cable Tie (Set of 4) . . . . . . . . . . . . . . . $1.95 

GUA910021 Long Cable Tie 28cm (Set of 4) . . . . . . . . . . . . .$2.95 

GUA910022 Cable Tie with Touch Fastener 17cm (Set of 4) . $2.95 


GAUI 


NEW! Lightweight, High Performance Heli 

GAU204401 Gaui Hurricane 425 STD .................................................. $399.99 

965mm Main rotor diameter, 900mm long, 3.8 lbs. flying weight. This lightweight 

heli provides an excellent power to weight ratio for the most extreme 3D routines. 

All parts are high quality and easy to work on. Comes 90% assembled with a 

Dupont plastic/fiberglass composite frame to get you in the air quickly. Includes 

425mm blades, which provides rock solid stability and dynamic maneuverability. 

A Gaui 1100Kv motor and 50A ESC is included. The CCPM design uses 

push-pull linkages for precise slop-free control. Requires two 3S 2200mAh size 

batteries in series. Flying time is 6-8 minutes. Hobby Lobby stocks a full line of 

replacement parts. 

Radio –––––––––––––––––––––––––––– 

SPM2710 DX7 DSM2 7-Ch. Radio, AR7000 Rx, 

4-DS821 Digital Servos ......................... $349.99 

Motor –––––––––––––––––––––––––––– 


Motor Controller ––––––––––––––––––– 


Gyro ––––––––––––––––––––––––––––– 

GAU924210 GU-210 Heading Hold Gyro .. $65.99 

Battery ––––––––––––––––––––––––––– 

2 - TP21003SPL2 Pro Lite V2 3 Cell 2100 mAh 

20C LiPoly Packs @ $47.99 ea. ................. $95.98 

Charger –––––––––––––––––––––––––– 


Balance Charger ........................................ $75.99 

Frame Parts 

GUA204010 Main Frame Set . . . . . . . . . . . . . . . . . . . . . . . . .$24.95 

GUA204180 Brace & Skid Set . . . . . . . . . . . . . . . . . . . . . . . . . $9.95 

GUA204188 Brace Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.50 

GUA204189 Skid Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.50 

GUA204545 Mast Collar Set . . . . . . . . . . . . . . . . . . . . . . . . . . $1.95 

GUA204581 Motor Mount Set (with B.) . . . . . . . . . . . . . . . . . $15.95 

GUA204690 H550 Carbon Frame Set . . . . . . . . . . . . . . . . . $199.95 

GUA204691 H550 Left Carbon Frame with Metal parts . . . . $41.95 

GUA204692 H550 Right Carbon Frame with Metal parts . . . $41.95 

GUA204693 H550 CF Gyro Mount . . . . . . . . . . . . . . . . . . . . . $2.95 

GUA204694 H550 CF Side Frame . . . . . . . . . . . . . . . . . . . . . $17.95 

GUA204695 H550 CF Bottom Plates . . . . . . . . . . . . . . . . . . . . $5.95 

GUA204696 H550 CF Battery Mount . . . . . . . . . . . . . . . . . . $11.95 

GUA204697 CF Body Retainer Bracket . . . . . . . . . . . . . . . . . $2.95 

GUA204699 B. Mount for CF Frames . . . . . . . . . . . . . . . . . $29.95 

GUA204700 Boom Clamps for CF Frames . . . . . . . . . . . . . . $12.95 

GUA204703 CF Servo Plates (38x15.5mm) . . . . . . . . . . . . . . $14.95 

GUA204704 CF Servo Plates (28x14mm) . . . . . . . . . . . . . . . $14.95 

GUA204775 H425XF Carbon Frame Set (L.M) . . . . . . . . . . $149.95 

GUA204776 H425XF Left Carbon Frame (L.M) . . . . . . . . . . $48.50 

GUA204777 H425XF Right Carbon Frame (L.M) . . . . . . . . . $48.50 

GUA204778 H425XF Carbon Gyro/Battery Mount (L.M) . . . . $9.95 

GUA204779 H425XF Carton Bottom Plates (L.M) . . . . . . . . . $11.50 

Head Parts 

GUA204041 Seesaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3.95 

GUA204042 Flybar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1.95 

GUA204051 Washout Base . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.95 

GUA204528 Main Rotor Yoke Set . . . . . . . . . . . . . . . . . . . . . $14.95 

GUA204529 Main Grip Set . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.95 

GUA204530 Head Spacer & Damper Set . . . . . . . . . . . . . . . . $2.95 

GUA204531 Spindle Shafts Pack . . . . . . . . . . . . . . . . . . . . . . $3.95 

GUA204532 Mixing Lever Set . . . . . . . . . . . . . . . . . . . . . . . . . $3.95 

GUA204533 Flybar Arms Set . . . . . . . . . . . . . . . . . . . . . . . . . $5.95 

GUA204534 H550 Flybar Paddles Set . . . . . . . . . . . . . . . . . . $5.95 

GUA204535 Washout Guide Assembly . . . . . . . . . . . . . . . . . $2.95 

GUA204536 Main Masts Pack (8mm) . . . . . . . . . . . . . . . . . . . $5.95 

GUA204537 Washout Arm Assembly . . . . . . . . . . . . . . . . . . . $6.95 

GUA204591 Hollow Main Masts Pack (8mm) . . . . . . . . . . . . . $8.50 

GUA204612 CNC Pitch & Roll Arm Set . . . . . . . . . . . . . . . . . $24.95 

GUA204614 CNC Elevator Lever . . . . . . . . . . . . . . . . . . . . . $12.95 

GUA204615 Spindle Spacer & Screw Set . . . . . . . . . . . . . . . . $2.95 

GUA204628 CNC Main Rotor Yoke Set . . . . . . . . . . . . . . . . . $32.95 

GUA204629 CNC Main Grip Set . . . . . . . . . . . . . . . . . . . . . . $59.95 

GUA204630 CNC Main Grip Lever Set . . . . . . . . . . . . . . . . . $17.95 

GUA204632 CNC Mixing Lever Set . . . . . . . . . . . . . . . . . . . $22.95 

GUA204635 CNC Washout Guide Assembly . . . . . . . . . . . . . $9.95 

GUA204637 CNC Washout Arm Assembly . . . . . . . . . . . . . . $24.95 

GUA204641 CNC Seesaw Set . . . . . . . . . . . . . . . . . . . . . . . . $24.95 

GUA204675 CNC Stop Plate . . . . . . . . . . . . . . . . . . . . . . . . . . $4.95 

GUA204676 CNC Main Rotor Yoke . . . . . . . . . . . . . . . . . . . . $15.95 

GUA204677 CNC Swashplate Guide . . . . . . . . . . . . . . . . . . . $14.95 

GUA204678 CNC Washout Base . . . . . . . . . . . . . . . . . . . . . . $11.95 

GUA204679 CNC Stabilizer Control Set . . . . . . . . . . . . . . . . $24.95 

GUA204680 CNC Main Rotor Head Ass’y . . . . . . . . . . . . . . $298.95 

GUA204698 CNC Mount for Pitch & Roll Arm . . . . . . . . . . . . $6.95 

GUA204734 Light-Weight Flybar Paddles Set . . . . . . . . . . . . $4.95 

GUA204756 H425 Flybar Paddles Set . . . . . . . . . . . . . . . . . . $5.95 

GUA204544 CNC Swash Plate Assembly . . . . . . . . . . . . . . . $49.95 

50 



NEW! .30 Size Heli with Electric Performance 

GAU204001 Gaui Hurricane 550 Basic (No motor/ESC) ............................. $249.99 

GAU204000 Gaui Hurricane 550 STD (With motor/ESC) ............................. $319.99 

GAU204006 Gaui Hurricane 550 CFS (No motor/ESC) ................................ $399.99 

1110mm Main rotor diameter, 1060mm long, 4.2 lbs. flying weight. Similar in size to 

.30 - .46 size fuel powered helicopters, Gaui 550 is stable enough to practice the 

basics and strong enough to handle the most aggressive 3D maneuvers. The CCPM 

design uses push-pull linkages for precise slop-free control. All come 90% assembled 

to get you in the air quickly. The Basic and STD kits come with a Dupont 

plastic/fiberglass composite frame and include wooden blades. The CFS kit comes 

with a carbon/fiberglass composite frame. Go all-out with the available line of CNC 

upgrade parts. Uses two 3S 2200mAh size batteries in series, which saves you money 

in battery costs over similar sized helicopters. Flying time is 6-8 minutes. Hobby Lobby 

stocks a full line of replacement parts. 

Radio –––––––––––––––––––––––––––– 

SPM2710 DX7 DSM2 7-Ch. Radio, AR7000 Rx, 

4-DS821 Digital Servos ...................... $349.99 

Motor –––––––––––––––––––––––––––– 

Included with GAU204000 

GAU855501 Gaui 850Kv Brushless Motor (for 

GAU201001 and GAU204006 only) ...... $62.99 

For High Performance use: 

GAU855503 Gaui 1300Kv Brushless Motor 

............................................................... $75.99 

Motor Controller –––––––––––– 

Included with GAU204000 

GAU923501 Gaui 50A ESC 

(for GAU201001 and GAU204006 only) ..... $54.99 


GAU923751 Gaui 75A ESC ................ $95.99 

CASBEC Castle Creations 10A BEC .. $21.21 

Blades –––––––––––––––––––––– 

Included with GAU204001 and GAU204000 

GAU204302 Gaui 500L Wood Blades .. $15.99 


GAU204322 Gaui 500L FPR and CF 

Composite Blades ...................... $49.99 

Gyro ––––––––––––––––––– 

GAU924210 Gaui GU-210 Heading Hold 

Gyro ............................................. $65.99 

Battery ––––––––––––––––– 

2 - TP21003SPL2 Pro Lite V2 3 Cell 2100 mAh 20C LiPoly 

Packs @ $47.99 ea. .................... $95.98 


2 - TP33003SP30 Pro Power 3 Cell 3300 mAh 30C LiPoly 

Packs @ $84.99 ea. .................. $169.98 

Charger –––––––––––––––––––––– 


Balance Charger ........................ $75.99 

Tail Parts 

GUA204123 Tail Output Shaft . . . . . . . . . . . . . . . . . . . . . . . . . $1.95 

GUA204141 Tail Pitch Slider Bush . . . . . . . . . . . . . . . . . . . . . $1.95 

GUA204191 Tail Boom (for 550L Blade) . . . . . . . . . . . . . . . . . $4.95 



GUA204194 Tail Control Rod (for 500 Tail Boom) . . . . . . . . . $1.95 



GUA204546 Tail Gear Case Set . . . . . . . . . . . . . . . . . . . . . . . $5.95 

GUA204547 Tail Pulley Set . . . . . . . . . . . . . . . . . . . . . . . . . . . $1.95 

GUA204548 Guide Wheel Assembly . . . . . . . . . . . . . . . . . . . . $2.95 

GUA204549 Fin & Stabilizer Set . . . . . . . . . . . . . . . . . . . . . . . $7.95 

GUA204550 Tail Grips Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.95 

GUA204551 Tail Hub Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3.95 

GUA204552 Tail Pitch Slider Set . . . . . . . . . . . . . . . . . . . . . . . $5.95 

GUA204553 Tail Pitch Control Lever Set . . . . . . . . . . . . . . . . $1.95 

GUA204554 H550 Tail Rotor Blade Set . . . . . . . . . . . . . . . . . . $5.95 

GUA204555 Tail Support Clamp . . . . . . . . . . . . . . . . . . . . . . . $1.95 

GUA204556 Rudder Control Guide . . . . . . . . . . . . . . . . . . . . . $3.95 

GUA204557 Tail Supporter Pipe . . . . . . . . . . . . . . . . . . . . . . . $5.95 

GUA204640 CNC Tail Pitch Slider Set (5mm tail shaft) . . . . $21.95 

GUA204642 CNC Tail Torque Tube Unit (for H425~H550) . . $39.95 

GUA204643 CNC Tail Belt Unit (for H425~H550) . . . . . . . . . $39.95 

GUA204644 Torque Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.95 

GUA204645 H425 Torque Tube Drive (425~475mm Blade) . $64.95 

GUA204650 CNC Tail Rotor Grips (for 5mm tail shaft) . . . . $39.95 

GUA204655 CNC Tail Pushrod Conv. (for H425~H550) . . . . $24.95 

GUA204710 Tail Servo Mount . . . . . . . . . . . . . . . . . . . . . . . . . $6.95 

GUA204720 Tail Grips Set with Thrust B. . . . . . . . . . . . . . . . $15.50 

GUA204754 Light-weight Tail Rotor Blade Set . . . . . . . . . . . . $4.95 

GUA204755 H425 Tail Rotor Blade Set . . . . . . . . . . . . . . . . . . $5.95 

GUA865001 Tail Rotor Belt 575XL(for 550L Blade) . . . . . . . . $7.95 



Main Blades 

GUA204301 Main Rotor Blades Pack (W. 475L) . . . . . . . . . . $15.95 



GUA204322 FPR & CF composite Blades (500L) . . . . . . . . . $49.95 

GUA204324 FPR & CF composite Blades (425L) . . . . . . . . . $44.95 

GUA204393 CF Main Rotor Blades (550L) . . . . . . . . . . . . . . $64.00 

Accessories 

GUA946001 Flashlight Set (7.4v~11.1v) . . . . . . . . . . . . . . . . $19.95 

GUA910010 Blade Support (for H425~H550) . . . . . . . . . . . . . $3.95 

GUA910020 Reusable Cable Tie (Set of 4) . . . . . . . . . . . . . . . $1.95 

GUA910021 Long Cable Tie 28cm (Set of 4) . . . . . . . . . . . . . $2.95 

GUA910022 Cable Tie with Touch Fastener 17cm (Set of 4) . $2.95 


Entry level price with Spektrum’s 

2.4 GHz peace of mind 

SPM5500 Spektrum DX5e Full Range 

Transmitter w/ AR500 Receiver ........ $99.99 

SPMR5500 Spektrum DX5e Transmitter 

Only ..................................................... $59.99 

The 5-channel DX5e uses the same full-range 

DSM2 technology found in the flagship 

Spektrum DX7. The DX5e brings together 

the unbeatable control of genuine DSM2 

technology with the simplest, easiest-to-use 

design available, letting anyone, from parkfliers 

to students to instructors take advantage of 

Spektrum technology for less. DX5e has servo 

reverse, Delta wing, and Hi/Lo rate programming. 

Includes AA Alkaline batteries. 

Full range 2.4 GHz Transmitter, 

compatible with all Spektrum 

aircraft receivers 

SPM6600 Spekrtum DX6i Full Range 

Transmitter w/o Servos MD2 ....... $199.99 

SPMR6600 Spektrum DX6i Transmitter 

Only ............................................… $149.99 

The 6-channel DX6i uses the same 

full-range DSM2 technology found in the 

Spektrum DX7 and includes an impressive 

list of programming features for both 

airplanes and helicopters that are simple to 

access and use. It comes with the new 

AR6200 DSM2 6-channel receiver that is 

robust enough to use in large models yet 

compact enough to fit in many park flyers. 

Includes rechargeable NiMH batteries and 

wall charger. 

Spektrum 7-Channel DX7 radio for 

small and large aircraft 


AR7000 Rx, 4 DS-821 Servos ................. $349.99 


MicroLite Rx, 3 DS-285 Digital Servos .. $339.99 

SPM2722 Spektrum DX7 DSM2 7-Ch. MicroLite 

Heli Radio, 3 DS-285 Servos ................... $339.99 

SPMR7700 Spektrum DX7 Transmitter Only 

.................................................................. $229.99 

With the DX7 you will be able to fly anything 

from micro electric helicopters and airplanes 

to large IMAC airplanes. Includes 20-model 

memory, airplane and helicopter software, switch 

assignment, P-mixes, 3-axis dual rate & expo, 

3-position flap (airplanes), 5-point throttle curve 

(helicopters), 3 flight modes plus hold (helicopters), 

CCPM, 2-servo 90 degree, 3-servo 90 degree, and 

3-servo 120 degree. Includes a rechargeable 1500 

mAh NiMH battery for the transmitter. 

5-channel receiver with dual aileron ports 

SPMAR500 Spektrum AR500 DSM2 5-Channel Sport Receiver 

....................................................................... $59.99 

1-3/16 x 7/8 x 1/2”, weighs 7 grams. The AR500 

DSM2 2.4 GHz sport aircraft full range 5-channel 

receiver is perfect for any sport application where 

5-channels or less is required. This receiver has a 

unique aileron configuration which has an additional 

aileron port. This allows you to plug a left and right 

aileron servo into the receiver independently without 

using a Y-harness. 

Spektrum’s super light3.4 gram receiver 

SPMAR6110 Spektrum AR6110 DSM2 Microlite 6-Channel Receiver 

...................................................................... $49.99 

1” x 3/4” x 1/2”, weighs 3.4 grams. Spektrum’s 2.4 

GHz DSM2 technology gets even smaller with the 

AR6110 6-channel DSM2 Microlite Park Flyer 

Receiver. The AR6110 weighs less than 3.5 grams 

making it the lightest 6-channel conventional plug 

aircraft receiver on the market. The AR6110 is 

compatible with all aircraft DSM2 radios and module 

systems. It is designed for park flyer use only. 

End-Pin connectors on Spektrum’s AR6110 receiver 

SPMAR6110E Spektrum AR6110e DSM2 

End-Pin 6-Channel Receiver ...................... $49.99 

1-1/8” x 7/8” x 3/8”, weighs 4.0 grams. Spektrum’s 

2.4 GHz DSM2 Technology gets even smaller with 

the AR6110e 6-channel DSM2 Microlite Park Flyer 

Receiver with End Pins, which is ideal for small compact 

airframes and helis. The receiver also features 

a red LED that indicates the number of holds that 

have occurred since the receiver was last powered 

on. The AR6110e is compatible with all aircraft DSM2 

radios and module systems. It is designed for park 

flyer use only. 

Prevent receiver lockout due to low voltage 

SPM1600 Voltage Protector Capacitor ......... $5.99 

Spektrum's new Voltage Protector prevents a DSM 

receiver's voltage from dropping below the proper 

operating level in lower voltage applications. 

Installation is as simple as plugging it into an open 

channel slot on the receiver unit. Voltage protector 

keeps the voltage level up during high drain, high current 

demands of digital servos and 3-D maneuvers. 

Has an internal and a remote receiver 

SPM6070 Spektrum DSM2 AR7000 7-Ch. Receiver ............. $99.99 

The AR7000 combines an internal and 

remote receiver, offering superior path 

diversity. The radio system simultaneously 

transmits on two frequencies, creating dual 

RF paths. This dual path redundancy, plus 

the fact that each of the two receivers is 

located in a slightly different location exposes 

each to a different RF environment and 

creates a bulletproof RF link in all conditions. 

6-Channel dual receiver for Spektrum DX7 

SPM6200 Spektrum DSM2 6-Ch 

Ultralite Receiver ................... $79.99 

7/8" x 1-5/16" x 1/2" (Main unit), 3/4" x 

1" x 1/4" (Second receiver connected to 

Main unit by 6" pigtail), weighs 10 

grams, input voltage range 3.5V-9.6V. 

The AR6200 combines an internal and 

remote receiver, offering superior path 

diversity and unparalleled reliability. 

Use this full-range receiver with any type and size of aircraft where up to 

6 channels are required. For use with Spektrum DX7 and other 

Spektrum radios with DSM2 technology. 

52 


6-channel DSM2 receiver for slim 

sailplane carbon fuselages 

SPMAR6250 Spektrum AR6250 DSM2 6-Channel Carbon-Fuse 

Receiver .................................................... $79.99 

1-3/8” x 3/4” x 3/8”, weighs 4.0 grams. Spektrum’s 

full range AR6250 DSM2 6-channel receiver is 

designed for carbon fiber fuselage installations. 

Carbon fiber can create an RF sheilding effect that 

can significantly reduce radio range when using 

conventional receivers and antennas. The 

AR6250 features an antenna design that overcomes 

RF issues in these critical environments. 

Spektrum 7-Channel receiver for 

high-performance helis 

SPMAR7100R Spektrum AR7100R DSM2 7-Channel Heli Rx w/ 

RevLimit ............................................................................ $219.99 

Main receiver is 1-7/8” x 1-5/8” x 3/8”, 

weighs 32.5 grams. The AR7100R is 

Spektrum’s first purpose-built receiver 

designed specifically for demanding 

heli applications. The combination of 

a primary internal receiver and secondary 

remote receiver allows the 

AR7100R to be installed in the best 

possible configuration for high-performance 

helis, while exposing the 

receiver to the greatest possible RF signal at all times. Additionally, the 

AR7100R features Spektrum’s integrated RevLimit rpm limiter, which 

provides the consistent rotor speed needed for outstanding 3D performance. 

Complete with two user-selectable failsafe modes, a built-in 

5.2V 2A voltage regulator and EC3 connectors, the AR7100R is the 

best choice for heli pilots looking to add the safety, security and clarity 

of Spektrum 2.4 GHz DSM2 technology to their aircraft while reducing 

the amount of on-board equipment and simplifying installation. 

Optional remote receiver for AR9100 

SPM9545 Spektrum Remote Receiver ................................... $34.99 

1” x 7/8” x 1/4”. The remote receiver can be used as a replacement or 

as an optional fourth remote receiver for the AR9100. Includes one 

24-inch extension. Additional remote receiver extensions are available 

below. 

SPM9010 Spektrum Remote Receiver Extension 6” ................ $8.99 

SPM9011 Spektrum Remote Receiver Extension 9” ................. $8.99 

SPM9012 Spektrum Remote Receiver Extension 12” ............... $8.99 



Spektrum Neck Straps 

SPM6703 Spektrum Neck Strap Adapter for DX7 

Transmitter .................................................. $13.99 

SPMP300 Spektrum Neck Strap ............... $11.39 

Sub-Micro 6 gram digital servo for 

Spektrum systems 

SPS060J Spektrum DSP60J Programmable 

Digital Super Sub-Micro Servo .......... $21.99 

15/16" x 3/8" x 3/4", 6 grams. 13.2 oz. of 

torque @ 4.8V. Compatible with Spektrum's 

AR6300 Nanolite receiver (SPM6300), together 

they make the lightest and most accurate 

control package available for Indoor and 3D airplanes and micro helicopters. 

The DSP60J uses a coreless motor and offers superior speed, 

torque and precision. Uses mini JST connectors. Includes mounting 

hardware and a large assortment of servo arms. The DSP60J is a digital 

servo that is programmable with Spektrum’s Digital Servo 

Programmer (SPMDSP). 

High performance 7-Channel receiver 

SPMAR7600 Spektrum AR7600 DSM2 

7-Channel High-Speed Receiver ... $129.99 

1-3/8” x 1-1/8” x 3/8”, weighs 8.9 grams. 

Spektrum is committed to offering receivers to 

modelers in all categories within the hobby, 

and the AR7600 is no exception to that commitment. 

The AR7600 is packed with industryleading 

features including an incredibly fast input-to-output response 

with an 11-millisecond frame rate, 2048 resolution for ultra-smooth 

servo travel, and a compact footprint making it ideal for any application 

from extreme 3D to competition helicopter performance. 

Spektrum’s most sophisticated receiver 

is also the safest 

SPMAR9100 Spektrum AR9100 DSM2 

9-Channel PowerSafe Receiver .... $219.99 

Main receiver is 1-7/8” x 1-5/8” x 5/8”, weighs 

34 grams. The AR9100 PowerSafe receiver 

is designed for models using multiple servos 

that draw excess current or multiple 

high-torque servos, such as giant-scale airplanes 

and jet models. It features a robust 

power bus designed to manage high-current loads, as well as dual 

16AWG battery input leads with EC3 connectors for use with larger battery 

packs. This makes it possible to support high-current systems 

straight through the AR9100 without the need for a separate power system. 

As an added measure of safety, Spektrum designed the AR9100 

with a soft switch. Servo current is routed around the switch so, should 

it fail for any reason, power to the system will not be interrupted. 

This unique receiver design contains a main unit which houses the 

power bus, and it includes 3 remote receivers which come with one of 

each: 9”, 12” and 24” remote receiver extensions. The dual path redundancy 

of Spektrum’s patented DuaLink technology, plus the fact each of 

the receivers is mounted in a slightly different location, exposes each to 

a different view of the RF environment and creates a bulletproof RF link 

in all conditions. You can add an optional fourth remote receiver 

(SPM9545—sold separately) to further enhance the receiving capabilities 

of the system for more complex aircraft. 

In addition to Spektrum’s exclusive SmartSafe technology, the 

AR9100 gives you the option of using standard user preset failsafe settings. 

It is also compatible with Spektrum’s optional Flight Log. 

Spektrum’s new digital servos 

are engineered and presented 

to make it as easy as possible 

to choose the best servo 

for your specific plane or heli 

application. All Spektrum digital 

servos feature dual ballbearings 

and operate on 4.8 

to 6.0V. 

Spektrum digital servos 

The A6000’s 90 oz.-in. of torque makes it a perfect choice for use in 

everything from .40-size trainers to 1/4-scale sport planes at the same 

price as most standard analog sport servos. The A6010 combines an 

impressive 100 oz.-in. of torque with a rugged brass-nylon gear train 

making it the ultimate sport servo for .40-size trainers to 1/4-scale sport 

planes. The heavy-duty, all metal-gear A6020 boasts an impressive 

146 oz.-in. of torque, making it ideal for everything from .40-size to 30% 

sport planes. An extremely tough titanium gear train, digital precision 

and incredible 278 oz.-in. of torque makes the A6030 the best option for 

any giant-scale application from 3D planes to warbirds. The A6030’s 

holding power and precision are further enhanced by the rigidity of its 

aluminum case which also functions as a heat sink to dissipate heat. 

The lightweight, responsive H5000 is perfect for CCPM control systems 

on 500-size helis. Its .11-second transit time provides ultra quick 

response exceeding the demands of the most aggressive 3D pilots. The 

holding power of its digital amplifier offers precise cyclic control that’s 

superior to conventional analog servos. The titanium-geared H6040’s 

lightning-quick .08-second transit time and impressive 167 oz.-in. of 

torque are ideal for use in competition-class .50- to .90-size helis that 

get pushed to the limits of 3D performance, while heat is better dispersed 

due to its strong aluminum case which also functions as a heat 

sink. 

SPMSA6000 A6000 Standard Digital Aircraft Servo Sport ..... $29.99 

SPMSA6010 A6010 Standard Digital Aircraft Servo ................ $39.99 

SPMSA6020 A6020 Standard Digital Aircraft Servo Torque ... $44.99 

SPMSA6030 A6030 Standard Digital Aircraft Servo High Torque 

....................................................................................................... $84.99 

SPMSH5000 H5000 Digital Mini Heli Servo .............................. $54.99 

SPMSH6040 H6040 Digital Heli Servo High Speed ................. $79.99 


SpektrumRadios and Accessories 

Faster response than any other spread spectrum 

surface system 

Spektrum 2.4 GHz DSM 

pistol-grip surface radio 

SPM20210 Spektrum DX2.0 

DSM 2CH Radio w/ 3CH 

Receiver ..................... $129.99 

The DX2.0 is a 2-channel, 2-model 

memory, 2.4 GHz DSM (Digital 

Spectrum Modulation) equipped 

computer radio control system for 

worldwide surface applications. 

Unlike ordinary 2-channel radios, 

Spektrum’s DX2.0 will put you on the 

drivers’ stand with complete security. 

The DX2.0 comes with a SR300 3- 

channel receiver. Requires 8-AA batteries. 

Spektrum 2.4 GHz surface 

radio with telemetry 

SPM3140 Spektrum DX3S 3-Ch. 

DSM 2.4 GHz Surface Radio w/ 

Telemetry ...................... $249.99 

Combining Spektrum’s industry-leading 

2.4 GHz DSM technology with 

valuable telemetry features, the 

DX3S represents the most advanced 

sport-level DSM radio ever developed. 

RTR drivers and sport racers 

can add the safety of telemetry and 

monitor vital vehicle stats right from 

their transmitter, without any additional 

equipment. Keep your engine operating in the optimum temperature 

range, keep an eye on your battery voltage and check out just how 

fast your vehicle is running, all right from the large LCD readout of the 

DX3S. Includes an SR3300T 3-channel receiver. Requires 4-AA batteries 

(included). 

Key Features: 

• Now compatible with the MR3000 3-channel marine receiver and 

DSM2 surface receivers, in addition to DSM surface receivers 

• Integrated telemetry with graphically depicted gauges on transmitter 

(requires DSM telemetry compatible surface receiver) 

• 10-model memory 

• Includes free bonus SR300 3-channel DSM sport receiver 

• Monitor your engine or motor’s operating temperature in either 

Fahrenheit or Celsius 

SPM3100 Spektrum DX3R 3- 

Ch. DSM2 2.4 GHz Surface 

Radio .......................... $319.99 

While the DX3R’s intelligently 

designed ergonomics are easily 

recognizable, it is the superior 

responsiveness of its advanced 

2.4 GHz DSM2 technology that 

will get people talking. In addition 

to unparalleled freedom and 

interference protection, patent 

pending DSM2 has a faster 

response time than any other 

spread spectrum or PPM 

system. You will be able to hold 

the line around a track with a 

level of precision and control 

unlike anything you have experienced 

before. And because 

DSM2 uses direct sequence 

spread spectrum technology, 

you’ll maintain this superior 

response rate no matter how 

“noisy” the 2.4 GHz environment gets. Includes SR3100 DSM2 

receiver. 

Key Features: 

• Faster response time than any other spread spectrum system 

• 30-model memory 

• Digital trims 

• Graphically depicted exponential and servo travel adjustment 

• Trim rate adjustment 

• Steering dual rate with override 

• Switch assignment 

• Servo monitor 

• Sub Trims 

• Three timer functions: countdown, count up and integrated 

Tiny 3-channel racing receiver for 

Spektrum surface systems 

SPM1210 Spektrum SR3500 2.4 GHz DSM 

3-Ch Micro Surface Receiver ............ $99.99 

Weighing in at 6.5 grams and measuring 

only 1.06 x .78 x .48 inches, the Spektrum 

SR3500 Micro 3 Channel Receiver clearly 

qualifies as one of the world’s smallest, 

easiest-to-install 3-channel racing 

receivers. All the no-pins, no-crystals, noglitches, 

no-interference convenience and 

security of Spektrum’s DSM 2.4 GHz 

technology in a small package. The 

SR3500 features low latency, equal to that 

of the Spektrum Pro Series receivers. 

Operating voltage is 3.2-9V and includes 

an integrated voltage protector. 

Water resistant 3-channel Spektrum 

2.4 GHz marine receiver 

SPMMR3000 Spektrum MR3000 2.4 GHz 

3-Channel Marine Receiver ............... $99.99 

Receiver case 0.75 x 1.3 x 0.2 in, antenna 

length (dual) 14 and 8 in, total weight 6 

grams. Spektrum’s 3-channel MR3000 

Marine 2.4 GHz receiver uses a unique signal 

protocol built into new DX3S transmitters that 

has been optimized specifically for marine 

use. Offering 3 channels (throttle, rudder and 

an auxiliary channel) plus dual throttle and 

steering outputs. The MR3000’s water-resistant 

case protects its circuitry from moisture 

and prevents corrosion, while its compact design allows for simple, 

clean installation. The MR3000 is compatible with the SPM3140 

DX3S surface system and all Spektrum DSM2 aircraft radios such as 

the DX5e, DX6i and DX7. Operating voltage 3.5-9.6V. 

54 


Radio Systems 

NEW! Hitec’s flagship 9-Channel 2.4 GHz 

“pure digital” radio system 

HTR191242 Hitec Aurora 9 2.4 GHz Radio System w/ 9-CH. 

Receiver ...................................................................... $459.99 

The Aurora 9 is a “pure digital” 2.4 GHz system offering an extremely 

low latency response time for that “connected” feeling. Featuring a 

large, backlit 5.1 inch touch screen display, 30 Model memory, 

assignable switches and customizable programming menus, the 

Aurora 9 is a true 3 in 1 radio with sophisticated programming for 

sailplanes, helicopters and all kinds of power planes. With all these 

features and a price that can’t be beat, there is no doubt the Aurora 9 

will become the radio of choice for the most sophisticated pilots. 

Features: 

• 8 Switches, 2 Sliders and 3 Rockers, all fully assignable 

• Easy to program using large 5.1” backlit touch screen 

• Advanced programming features for fixed wing aircraft, 

gliders and helicopters 

• Precision quad ball bearing gimbals 

• Built in telemetry capabilities 

• 30 model memory 

HTR191240 Hitec Aurora 2.4 GHz Standard version ......... $529.99 

HTR191242 Hitec Aurora 9 2.4 GHz Trans. & Rx ................ $459.99 

HTR191244 Hitec Aurora 9 2.4 GHz Trans. & 7 Ch. Rx ...... $429.99 

Optic 6 Advanced 6 Channel Computer Radio 

Hitec’s popular Optic 6 is loaded with programming features for power 

planes, gliders and helicopters and features an 8 model 

memory. Fully assignable switches, two proportional sliders and 

dual timer function. 

HTR158241 Hitec Optic 6 2.4 GHz Standard system w/Optima 7 

receiver, 4 HS-325HB Ball Bearing servos, transmitter and 

receiver batteries with charger .............................................. $234.99 

HTR158242 Hitec Optic 6 2.4 GHz Transmitter and Receiver 

Combo ...................................................................................... $199.99 

HTR158243 Hitec Optic 6 2.4 GHz Transmitter with two Optima 7 

Receivers ................................................................................. $229.99 

Optic 6 Sport 6-Channel Computer Radio 

Hitec’s most affordable computer radio system with 10 model memory; 

perfect for budget conscious modelers and capable of flying glow and 

electric planes, gliders, or helicopters. 

HTR159721 Hitec Optic 6 Sport Std. version ........................ $109.99 

Transmitter, four HS-325HB Ball Bearing servos, 8 channel HFD-08RO 

receiver, rechargeable transmitter and receiver batteries with AC 

charger. 

HTR159723 Hitec Optic 6 Sport Electric Std. version ......... $164.99 

Transmitter, three HS-81 servos, 6 channel HFS-06MT Receiver, 

rechargeable transmitter battery and AC charger. 

HTR159725 Hitec Optic 6 Sport Electric Micro version ....... $114.99 

Transmitter, three HS-55 Feather Servos, 5 channel micro 05S 

receiver, rechargeable transmitter battery and AC charger. 


Servos 

NEW! 

Hitec digital servos for 

high performance 

applications 

HTS35045 HS-5045HB Digital AGTT Micro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $29.99 

HTS35055 HS-5055MG Economy Digital Feather . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $26.99 

HTS35056 HS-5056MG Premium Digital Feather . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $42.99 

HTS35065 HS-5065MG High Torque Feather . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $46.99 

HTS35085 HS-5085MG Premium Digital Micro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $46.99 

HTS35125 HS-5125MG Digital Slim Wing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $61.99 

HTS35245 HS-5245MG Digital Mini . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $49.99 

NEW! Low cost programmers 

for digital servos 

HT44440 Hitec HPP-21 PC Digital 

Programmer ...................... $26.99 

HT44460 Hitec HPP-21 Plus PC 

Digital Programmer .......... $49.99 

Use your computer to program and test Hitec digital servos. 

Programs all Hitec Digital Servo Parameters. Use as a servo 

tester for all brands of servos. Free Downloadable Software. 

Connects to PC via USB. The HPP-21 Plus can also be used 

at the flying field or at your work bench without being connected 

to your PC. 

HT44430 Hitec HFP-20 

PC Digital Programmer 

......................... $139.99 

The HFP-20 allows 

users to perfectly match 

G2 programmable digital 

servos in ganged applications 

or customize 

several other parameters 

such as dead band, direction, speed reduction, endpoints 

and failsafe. The HFP-20 is required to program the overload 

protection features in the new HS-79XX and 50XX servos along 

with the standard/high resolution setting in the HS-79XX series. 

The HFP-20 is backwards compatible and works with all Hitec 

Digital Servos. 

56 


For Cars and Boats 

Low priced radio for boats 

and cars 

HTR3175 Hitec Ranger 2N, with 2 

HS-303 Servos .................... $49.99 

Uses dry cells (not included). Has 

servo reverse, adjustable sticks, low 

battery warning. 75 mhz. 

4 Channel Radio for Surface Vehichles 

HTR5651 Hitec LASER 4 Channel FM, 

For Surface Vehicles, 75MHZ, 

2 HS-322 Servos .......... $113.99 

Transmitter has trim levers for small servo 

adjustments, adjustable travel volume for 

channel 1 and 2, servo reversing, trainer 

cord receptacle, mixing of channel 1 and 

2 and mixing of channel 2 and 4. 

Included: 8 channel Supreme receiver, 2 

standard servos, transmitter NiCad’s, 

overnight charger for NiCad’s. No receiver NiCad. 

Radio Systems 

Receivers (for any 72 mHz radio) 

Long range micro receiver for lightweight models 

works with ALL 72 mHz radio systems 

HTRR572 Hitec Micro 05S Receiver 

with Auto-Shift ............... $23.99 

1-7/16" x 3/4" x 3/8", 8.6 grams. Micro 

receiver with 5 servo connectors at the 

end. Channel 1 through 4 operate normally 

and the 5th servo connection operates 

transmitter Ch. 6 (there is no channel 5). 

Great for any small model with separate aileron servos. Plug your 

ailerons into channels 1 and 6 for independent trimming and added 

functions like flaperons and aileron differential. This is a full range single 

conversion receiver with "auto-shift", it will work with both positive 

and negative shift transmitters. Selectivity has been enhanced by the 

addition of an "Auto Gain Control" this greatly reduces the chance of 

interference from other flyers. Operating voltage 4.8 to 6V. To get the 

correct crystal, you must order the following item: 

HTRR72 _ _ (fill in channel number) 

Crystal for Hitec Single Conversion FM Receiver .................. $6.89 

6 channel long range micro receiver - works with 

ALL FM radio systems 

HTRR872 Hitec "Mini 6S" Receiver with 

Auto-Shift ........................ $31.99 

1-1/2" x 1" x 3/4", 15.5 grams (1/2 oz.). Single 

conversion, extra long range, compact receiver 

that will work with ANY modern FM transmitter. 

Auto-shift detects whether your transmitter 

is positive or negative shift automatically, 

no jumpers or switches to fiddle with. Great 

for lightweight airplanes with added functions like retracts or flaps. 

Operating voltage 4.8 to 6V. To get the correct crystal, you must order 

the following item: 

HTRR72 _ _ (fill in channel number) 

Crystal for Hitec Single Conversion FM Receiver ............... $6.89 

HTS045 HS-45HB Premium Feather . . . . . . . . . . . . . . . . . . . $21.99 

HTS050 HS-50 Super Feather . . . . . . . . . . . . . . . . . . . . . . . . $20.99 

HTS055 HS-55 Economy Feather . . . . . . . . . . . . . . . . . . . . . $13.99 

HTS056 HS-56HB Premium Feather . . . . . . . . . . . . . . . . . . . $24.99 

HTS065 HS-65HB Mighty Feather . . . . . . . . . . . . . . . . . . . . . $25.99 

HTS065MG HS-65MG Mighty Feather . . . . . . . . . . . . . . . . . . $35.99 

HTS075 HS-75BB Retract . . . . . . . . . . . . . . . . . . . . . . . . . . . $29.49 

HTS077 HS-77BB Low Profile . . . . . . . . . . . . . . . . . . . . . . . . $25.99 

HTS081 HS-81 Standard Micro . . . . . . . . . . . . . . . . . . . . . . . $16.49 

HTS082 HS-82MG Standard Micro . . . . . . . . . . . . . . . . . . . . $21.99 

HTS085 HS-85BB Premium Micro . . . . . . . . . . . . . . . . . . . . . $23.49 

HTS085MG HS-85MG Premium Micro . . . . . . . . . . . . . . . . . . $30.99 

HTS125MG HS-125MG Slim Wing . . . . . . . . . . . . . . . . . . . . . $34.99 

HTS225BB HS-225BB Mighty Mini . . . . . . . . . . . . . . . . . . . . $20.99 

HTS225MG HS-225MG Mighty Mini . . . . . . . . . . . . . . . . . . . .$29.99 

HTS0322S HS-322HD Standard . . . . . . . . . . . . . . . . . . . . . . . . $9.99 

HTS0422 HS-422 Deluxe Standard . . . . . . . . . . . . . . . . . . . . $12.49 

HTS0645M HS-645MG High Torque . . . . . . . . . . . . . . . . . . . $35.99 

HTS0785 HS-785HB Winch Servo . . . . . . . . . . . . . . . . . . . . . $49.99 

HTS0965MG HS-965MG Coreless High Speed . . . . . . . . . . . $69.99 


Model Motors has the most complete selection of OUTRUNNER brushless motors available today. AXI OUTRUNNER motors are made of the 

highest quality materials and workmanship. They also have the best warranty on the market today. Every Czech manufactured AXI motor is a 

highly efficient, high torque, maintenance free rotating can (OUTRUNNER) brushless motor with strong neodym magnets. The use of a gearbox 

is NOT necessary. The hardened steel motor shaft is supported by 2 ball bearings in the 22-28 series motors, and 3 ball bearings in the 

41-53 series motors. 

The larger AXI motors easily replace old outdated glow engines. AXI motors fly .40-1.20 size airplanes with more power and authority than the 

weaker glow engines. 

Understanding AXI OUTRUNNERS 

Each AXI motor has a 6 digit numbering system. For example: 2208/34. The first 

two numbers (22) represent the diameter of the stator (the fixed part in the middle 

of the motor) in millimeters. The second two numbers (08) represent the 

length of magnets (attached to the rotating case) in millimeters. The third set of 

two numbers (34) represents the number of wire winds, also called turns. 

When comparing the motors within any series (2208, 2212, etc.) there are several 

characteristics that you will notice. Motors with higher winds spin slower for 

every volt of electricity applied, they have a lower Kv (RPM/V). They spin a larger 

propeller at slower speeds and at a lower current than low turn motors. Motors 

with lower winds spin faster for every volt of electricity applied, they have a higher 

Kv (RPM/V). They spin a smaller propeller at higher speeds and at a higher 

current than high turn motors. 

To determine the motor for your model: analyze the character of your airplane, is 

it sleek and fast, or a slower plane with a lot of drag For the high speed airplane 

a low turn motor that spins a small prop fast would be the right choice. For a 

Trainer or Biplane with a lot more drag, a high turn motor that can spin a much 

larger prop and produce a lot of thrust at low speed is what you want. 

Whatever your airplane, Model Motors makes a high quality OUTRUNNER motor 

capable of flying it like nothing else. 

18-1/2 gram motors for indoor models to 9 ounces 

PM2203R AXI Gold 2203/Race OUTRUNNER Motor .. $69.99 

PM220346 AXI Gold 2203/46 OUTRUNNER Motor ..... $69.99 

PM220352 AXI Gold 2203/52 OUTRUNNER Motor ..... $69.99 

Specs: 18-1/2 grams, 1-3/32" diameter, 3/4" case length, 3mm carbon 

shaft. Includes built-in 3 point radial mount and flexible prop adapter 

with O-ring for GWS and APC props. The best lipoly for light indoor airplanes 

is a 2 cell 300 mAh pack; for heavier indoor/outdoor airplanes 

use a 2 cell 400 or 800 mAh lipoly pack. 

OUTRUNNER KV (RPM/V) Prop/Battery Combo Battery Range Motor Controller Airplane size range Type of Flying 

2203/R 2300 2s lipo - 7x3.5 2 LiPoly 8 Amp-JAPO8 3.5-6 oz. Indoor 3D 

2203/46 1720 2s lipo - 8x3.5 2 LiPoly 8 Amp-JAPO8 3.5-7.5 oz. Indoor 3D 

2203/52 1525 2s lipo - 8x3.5 2 LiPoly 8 Amp-JAPO8 3.5-9 oz. Indoor 3D 

58 


Tiny powerhouse for airplanes to 11 oz. 

PM220454 AXI Gold 2204/54 OUTRUNNER ............. $74.99 

Specs: Less than 1 oz., 1-3/32" diameter, 1-1/32" case length, 

3.17mm (1/8") shaft. Includes built-in radial mount and flexible 

prop adapter with O-ring for GWS and APC props. The best 

lipoly for light indoor airplanes is a 3 cell 300 mAh pack, and 

for heavier indoor/outdoor airplanes use a 3 cell 800 mAh 

lipoly pack. 


2204/54 1400 3s lipo - 8x3.8 2-3 LiPoly 8 Amp 3.5-11 oz. Indoor 3D 

PM220820 AXI Gold 2208/20 OUTRUNNER .. $74.99 



Powerful motor replacement for "Speed 400" size airplanes 

Shown With 

Optional 

Radial Mount 

Specs: 1.6 oz. weight, 1-3/32" diameter, 1-3/8" 

case length, 3.17mm (1/8") shaft diameter. 


2208/20 1820 2s lipo - 8x3.8 2-3 LiPoly 18 Amp 7-18 oz. Pattern 

3s lipo - helicopter 4-8 Nixx Micro-helicopter 

2208/26 1420 2s lipo - 8x4.5 2-3 LiPoly 12 Amp 7-18 oz. Pattern 

3s lipo - 7x4 6-8 Nixx 3D 

2208/34 1100 2s lipo - 10x5 2-3 LiPoly 12 Amp 7-18 oz. 3D 

3s lipo - 10x3.8 8-10 Nixx 

PM221212 AXI Gold 2212/12 OUTRUNNER ... $79.99 




Specs: 2 oz. weight, 1-3/32" diameter, 1-3/16" case 

length, 3.17mm (1/8") shaft. 

For Speed 400/480 size airplanes, but provides much more power 


2212/12 1950 2s lipo - 7x5 2-3 LiPoly 18 Amp 10-35 oz. Pylon 

3s lipo - 5x5 5-7 Nixx 30 Amp Speed 400 Helicopters 

3s lipo - heli 

2212/20 1150 2s lipo - 9.5x5 2-3 LiPoly 18 Amp 10-28 oz. Sport 

3s lipo - 8x4 

6-10 Nixx 

2212/26 920 2s lipo - 10.5x6 2-3 LiPoly 12 Amp 10-25 oz. Pattern 

3s lipo - 10x5 6-8 Nixx 3D 

2212/34 710 2s lipo - 12x8 2-3 LiPoly 12 Amp 10-25 oz. Pattern 

3s lipo - 11x5.5 6-10 Nixx 

(1200-2100 mAh) 

Tiny OUTRUNNER includes gearbox - spins HUGE prop 

PM22179G Model Motors AXI Gold 2217/9D+PG3 OUTRUNNER Motor w/Gearbox .. $154.99 

Comes complete with pre-installed 3.1:1 planetary gearbox. Use in Hotliners to 38 oz. and Sailplanes to 

60 oz. Best with Jeti SPIN Controller for slower acceleration and soft braking. 

Specs: 3.28 oz. weight, 1-3/32" diameter, 2" case length w/gearbox, 3.17mm (1/8") motor shaft, 4mm 

gearbox prop shaft. 


2217/9D+PG3 1880 3s lipo - 16x10 2-3 LiPoly 44 Amp SPIN 38-60 oz. Hotliner, Sailplane 


For SPEED 480/500 size airplanes, but provides much more power 

PM22179D Model Motors AXI 2217/9D OUTRUNNER .... $89.99 

PM221712 Model Motors AXI 2217/12 OUTRUNNER ..... $89.99 

PM221716 Model Motors AXI 2217/16 OUTRUNNER ..... $89.99 

PM221720 Model Motors AXI 2217/20 OUTRUNNER .... $89.99 

Specs: 2.45 oz. weight, 1-3/32" diameter, 

1-3/8" case length, 3.17mm (1/8") shaft. 


2217/9D 1880 2s lipo - 9x5 2-3 LiPoly 30 Amp 21-30 oz. Pylon 


Speed 400 Helicopters 

2217/12 1380 2s lipo - 12x6 2-3 LiPoly 30 Amp 21-39 oz. Aerobatic 

3s lipo - 9x4.5 

3D 

3s - 4s lipo - heli 

Speed 400 Helicopters 

2217/16 1050 2s lipo - 12x6 2-3 LiPoly 18 Amp 21-42 oz. Sport 

3s lipo - 10x6 

Aerobatic 

3s lipo - 11x5.5 

3D 

2217/20 840 3s lipo - 12x6 2-4 LiPoly 18 Amp 24-50 oz. Pattern/Scale 

3D 

For Speed 500 size airplanes and .25 glow conversions 

PM280816 AXI Gold 2808/16 OUTRUNNER ....... $89.99 



Specs: 2.7 oz. weight, 1-3/8" diameter, 1- 

3/8" case length, 4mm shaft diameter. 


2808/16 1820 2s lipo - 8.5x6 2 LiPoly 30 Amp 21-53 oz. Sport 

6-8 Nixx 

2808/20 1490 2s lipo - 9.5x5 2-3 LiPoly 30 Amp 21-53 oz. Sport 

3s lipo - 8x5 

6-10 Nixx 

2808/24 1190 3s lipo - 9x5 2-3 LiPoly 30 Amp 21-53 oz. Sport 

6-10 Nixx 

For Speed 500-600 size airplanes and .25-.35 glow conversions 

PM281410 AXI Gold 2814/10 OUTRUNNER ...... $94.99 




Specs: 3.75 oz. weight, 1-3/8" diameter, 1-5/8" 

case length, 4mm shaft diameter. 


2814/10 1640 2s lipo - 10x6 2-3 LiPoly 

3s lipo - 9x5 6-8 Nixx 70 Amp 35-67 oz. Sport 

2814/12 1390 2s lipo - 11x7 2-3 LiPoly 

3s lipo - 9.5x5 7-10 Nixx 40 Amp 35-70 oz. Sport/Scale 

2814/16 1035 3s lipo - 10x5 3 LiPoly 30 Amp 35-64 oz. Sport/Scale/Sailplane 

3s lipo - 9x6 

Aerobatic 

2814/20 840 3s lipo - 10x5 3-4 LiPoly 30 Amp 35-67 oz. Sport/Scale/Sailplane 


Aerobatic 

60 


OUTRUNNER replacement for .40 size glow 

PM282008 AXI Gold 2820/08 OUTRUNNER ........ $99.99 




Specs: 5.3 oz. weight, 1-3/8" diameter, 1-5/8" case length, 

5mm shaft diameter. 


2820/08 1500 2s lipo - 12x8 2-3 LiPoly 70 Amp 35-81 oz. Hotliners to 53 oz. 

3s lipo - 11x5 6-8 Nixx Fast Aerobatic to 81 oz. 


2820/10 1200 7 NiMH - 13x8 3-4 LiPoly 40 Amp 35-88 oz. Sport, 

8 NiMH - 12x8 8-10 Nixx Pattern 


2820/12 990 3s lipo - 12x6 3-5 LiPoly 40 Amp 35-88 oz. Sport, 

12 NiMH - 11x8 8-14 Nixx Pattern 

14 NiMH - 10x7 

2820/14 860 3s lipo - 14x7 3D 3-4 LiPoly 40 Amp 45-90 oz. Sport, 


Glider 

NEW! Launch a 9-pound sailplane with this 

lightweight motor and gearbox 

PM282008G AXI Gold 2820/8+PG4/33 OUTRUNNER 

Motor w/Gearbox ..................................................................... $179.99 

High performance AXI 2820/8 GOLD LINE Outrunner and high quality 

planetary gearbox PG 4/33 with 4 satellite gears. Unique combination of 

AXI outrunner and light weight gearbox can spin an extremely big propeller 

(18.5 x 12 folding prop). AXI 2820/8 GOLD LINE with PG 4/33 is 

ideally suited to narrow fuselages in large sailplanes up to 4000g. This 

power unit runs at a very high RPM and must never be run in a no load 

condition. Use a high quality controller like a Jeti Advance Pro or SPIN. 

We also recommend using an AXI cooler for AXI 2820 series motors 

(PM28006). For use with 4S Lipo battery, SPIN 55A controller, and a 18.5 

x 12 prop. 

Specs: 7.9 oz. weight, 1-3/8” diameter, 2.9” case length w/gearbox, 6mm 

gearbox prop shaft. 


2820/8+PG4/33 1500 4s lipo-18.5 x 12 4 LiPoly SPIN 55 141 oz. Sailplane 

NEW! Spin a huge 20x13 prop and haul your 

large sailplane to the moon 

PM282608G AXI Gold 2826/8+PG4/33 OUTRUNNER Motor 

w/Gearbox ................................................................................. $189.99 

High performance AXI 2826/8 GOLD LINE Outrunner and high quality 

planetary gearbox PG 4/33 with 4 satellite gears. Unique combination of 

AXI outrunner and lightweight gearbox can spin an extremely big propeller 

(20 x 13 folding prop). AXI 2826/8 GOLD LINE with PG 4/33 is 

ideally suited to narrow fuselages in large sailplanes up to 7000g. This 

power unit runs at a very high RPM and must never be run in a no load 

condition. Use a high quality controller, for example Jeti Advance pro or 

SPIN. We also recommend using an AXI cooler for AXI 2826 series 

motors (PM28006). For use with 5S Lipo battery, 55A SPIN controller, 

and a 20 x 13 prop. 

Specs: 9.0 oz. weight, 1-3/8” diameter, 3.5” case length w/gearbox, 

6mm gearbox prop shaft. 


2826/8+PG4/33 1130 5s lipo-20x13 5 LiPoly SPIN 55 To 229 oz. (14 Lbs.) Large Sailplane 


More powerful motor replacement for .40 and .46 size glow powered airplanes 




Specs: 6.4 oz. weight, 1-3/8" diameter, 2-1/4" case 

length, 5mm shaft diameter. 


2826/08 1130 2s lipo - 14x6E 2-3 LiPoly 70 Amp 53-82 oz. Hotliners to 64 oz. 

3s lipo - 13x6E 8-12 Nixx cells Fast Aerobatic to 

4s-5s lipo - heli 

82 oz. 

2826/10 920 3s lipo - 14x7E 3-5 LiPoly 40 Amp Opto 53-96 oz. .46 Sport 

4s lipo - 11x8E 10-16 Nixx cells .40-.46 Trainer 

5s lipo - 11x6E 

2826/12 760 4s lipo - 13x8E 3-5 LiPoly 40 Amp Opto 53-106 oz. .46 Sport 

5s lipo - 11x6E 10-18 Nixx cells .46-.60 trainer 

Powerful motor replacement for .60 size glow 

airplanes and sailplanes 




Specs: 11.28 oz. weight, 2" diameter, 2-3/8" case length, 



4120/14 660 12 NiMH - 13x11 4-5 LiPoly 70-77 Amp Opto Sailplanes to 158 oz. .60 Trainer 

5s lipo - 12x8 12-16 Nixx Sport to 105 oz. .60 Sport 

Powered Sailplanes 

4120/18 515 5s lipo - 14x9 5-7 LiPoly 70-77 Amp Opto Sailplanes to 176 oz. .60 Trainer 

6s lipo - 14x8 16-20 Nixx Sport to 124 oz. .60 Sport 

20 NiMH - 13x8 Powered Sailplanes 

4120/20 465 5s lipo - 15x8 5-6 LiPoly 70-77 Amp Opto Trainer to 141 oz. .60 Trainer 

5s lipo - 15x10 Aerobatic to 116 oz. .60 Sport 

15 NiMH - 17x8 Sailplane to 176 oz. Powered Sailplanes 

Replace your .60-.90 glow engine with an AXI 

OUTRUNNER - more powerful, lighter weight 



Specs: 14.42 oz. weight, 2" diameter, 2-5/8" case length, 



4130/16 385 16 NiMH - 18x10 5-8 LiPoly 77 Amp Opto Sailplanes to 211 oz. .60-.90 Sport 

6 lipo - 16x10 16-24 Nixx Sport to 159 oz. Powered Sailplanes 

7 lipo - 14x10 

4130/20 305 6 lipo - 18.5x12 6-8 LiPoly 77 Amp Opto Sailplanes to 247 oz. .60-.90 Sport/Scale 

8 lipo - 16x10 20-30 Nixx Sport to 176 oz. Powered Sailplanes 

30 NiMH - 15x10 

62 


Replace your .90-1.20 glow engine with an AXI 

OUTRUNNER - more powerful, lighter weight 




Specs: 17.46 oz. weight, 2-7/16" diameter, 2-1/4" case 

length. Prop adaptors for mounting motor behind a firewall or 

reversed and mounted to the front of a firewall are included. 

8mm motor shaft, prop shaft adapter is 12mm diameter. 


5320/18 370 6s lipo - 20x8 6 LiPoly 90 Amp Opto Trainer to 247 oz. .90-1.20 Sport/Scale 

6s lipo - 18x12 Aerobatic to 194 oz. .90-1.20 Sport 

6s lipo - 20x8 3D to 152 oz .90-1.20 Sport 3D 

5320/28 249 8s lipo - 23x11 Up to 10 LiPoly 90 Amp Opto Sailplanes to 352 oz. .90-1.20 Sport 

10s lipo - 18x12 Up to 32 Nixx Sport to 247 oz. Powered Sailplanes 

5320/34 206 10s lipo - 19x12 or Up to 10 LiPoly 90 Amp Opto Sailplanes to 352 oz. .90-1.20 Sport 

20x11 Up to 32 Nixx Sport to 247 oz. Powered Sailplanes 

NEW! Replace your 1.40 glow engine with an AXI OUT- 

RUNNER-more powerful, lighter weight 

PM532524 AXI Gold 5325/24 OUTRUNNER ................................... $269.99 

Specs: 20.3 oz. weight, 2-7/16” diameter, 2-3/8” case length. Prop adaptors for 

mounting motor behind a firewall, or reversed and mounted to the front of a 

firewall are included. 8mm prop shaft, motor shaft adapter is 12mm diameter. 


5325/24 232 10s lipo - 19x12 10 LiPoly JAP90P 176 oz. F3A 

10s lipo - 20x13 SPIN99 353 oz. Sailplane 

Replace your 1.20-1.60 glow engine with 

an AXI OUTRUNNER - more powerful, 

lighter weight 

PM533018 AXI Gold 5330/18 OUTRUNNER .... $269.99 

PM5330F AXI Gold 5330/F3A OUTRUNNER ... $269.99 

PM533024 AXI Gold 5330/24 OUTRUNNER .... $269.99 

Specs: 23 oz. weight, 2-7/16" diameter, 2-1/2" case 

length. Prop adaptors for mounting motor behind a firewall, 

or reversed and mounted to the front of a firewall are 

included. 8mm motor shaft, prop shaft adapter is 12mm 

diameter. 


5330/18 259 10s lipo - 19x12 or Up to 10 LiPoly 90 Amp Opto Sailplanes to 352 oz. 1.20-1.60 Sport/Scale 

20x13 Up to 32 Nixx Sport to 247 oz. Sailplane 

5330F 235 10s lipo - 22x12 Up to 10 LiPoly 90 Amp Opto Sailplanes to 352 oz. F3A Competition 

Up to 32 Nixx Sport to 247 oz. Scale 

Sailplane 

5330/24 197 10s lipo - 23x11 Up to 10 LiPoly 90 Amp Opto Sailplanes to 352 oz. .20-1.60 Sport/Scale 

or 21x14 Up to 32 Nixx Sport to 247 oz. Sailplane 


Fly 20 plus pound airplanes better with electric power 




Specs: 31-1/2 oz. weight, 2-7/16" diameter, 3-1/8" case 

length. Prop adaptors for mounting motor behind a firewall, 

or reversed and mounted to the front of a firewall are 

included. 8mm motor shaft, prop shaft adapter is 12mm 

diameter. 


5345/14 225 10s lipo - 22x10 8-12s LiPoly 200 Amp SPIN Opto Big 3D airplanes to 23 lbs. 1.20-1.60 3D, Sport 

12s lipo - 21x14 Sport airplanes to 26 lbs. Scale 

5345/16 195 12s lipo - 24x12 8-12s LiPoly 90 Amp Opto or Sailplanes to 45 lbs. F3A Competition 

12s lipo - 21x14 99 Amp SPIN Opto Big 3D airplanes to 20 lbs. Giant Scale 

Sport Aerobatic to 22 lbs. Large Sailplane 

5345/18 171 12s lipo - 26x10 8-12s LiPoly 90 Amp Opto or Giant Scale to 26 lbs. 1.20 -1.60 Sport 

12s lipo - 24x12 99 Amp SPIN Opto Sport Aerobatic to 20 lbs. Scale and Aerobatic 

PM5330D AXI "5330/20 Double" OUTRUNNER .................. $974.99 

For use with 2x10S Lithium Polymer packs and a 24"x10" wood Prop. 

Specs: 55 oz. weight, 2-1/2" diameter case, 5-3/4" combined case 

length. Motor mount is between the 2 motors (Custom mount must be 

fabricated for individual airplane by modeler). The two motors come 

ganged together to drive a single prop. Can also be used to drive 2 

propellers in a counter rotating setup. 

Custom double motor for large scale airplanes 


5330/20 Double 210 or 260 Two - 10s lipo 10s LiPoly x 2 Two-90 Amp Opto Scale aerobatic 

Two 24x10 props airplanes to 33 lbs. Large Scale Aerobatic 

PM5360 AXI "5360 Special" OUTRUNNER ............. $644.99 

Direct Drive a 30"x20" propeller for large scale airplanes 

Specs: 48 oz. weight, 3-1/2" diameter at front bearing, 2-1/2" diameter 

case, 3-3/8" case length. Motor mounts behind a firewall. Motor shaft 

is 8mm, prop shaft adapter is 12mm diameter. Massive front bearing 

provides the stability to spin a huge 30" wooden propeller. (Do not use 

in 3D aerobatic airplanes.) 


5360 110 or 130 10s lipo - 30x20 10s LiPoly 90 Amp Opto Scale airplanes to Large Scale 

wooden prop 

33 lbs. 

64 


A Lower priced option to an AXI Gold - the AXI Silver 

AXI Silver motors are OUTRUNNER brushless motors manufactured 

by Model Motors, makers of the number one OUTRUNNERS known as 

AXI Gold. AXI Silver OUTRUNNERS are the same size and weight as 

the AXI Gold OUTRUNNERS. They are about 2% less efficient than 

Go AXI Silver when you're not a professional pilot, but 

still want more than enough power 

PS220820 AXI Silver 2208/20 

OUTRUNNER ........................................ $49.99 

PS220826 AXI Silver 2208/26 

OUTRUNNER ........................................ $49.99 

PS220834 AXI Silver 2208/34 

OUTRUNNER ........................................ $49.99 

AXI Gold, which means that their flight times with the same size 

battery will be about 2% less. AXI Silvers mount exactly the same as 

AXI Golds and use the same radial mount set (PM22002) and prop 

saver adapters (PM22003 and PM22004). 

For Speed 400/480 size airplanes, but with much more 

power 

PS221220 AXI Silver 2212/20 

OUTRUNNER ........................................ $54.99 

PS221226 AXI Silver 2212/26 

OUTRUNNER ........................................ $54.99 

PS221234 AXI Silver 2212/34 

OUTRUNNER......................................... $54.99 

Specs: 1.6 oz. weight, 1-3/32" diameter, 

1-1/32" case length, 3.17mm (1/8") shaft. 

Includes pre-connected 3 motor wire gold 

connector set. 

Shown with 

Optional Radial 

Mount 

AXI Accessories 

Protect your OUTRUNNER against prop strikes 

PM22003 "Prop Saver" for AXI 22xx 

OUTRUNNERS ..................................... $6.99 

Use when mounting AXI 22xx series motors behind a 

firewall. Comes complete with adapters for APC and 

GWS props and rubber O-ring for prop attachment. 

PM22004 Radial Mount "Prop Saver" for 

AXI 22xx OUTRUNNERS ......................... $10.99 

Use when mounting AXI 22xx motors with a Radial 

Mount Set (PM22002) in front of the firewall. Prop 

saver adapter replaces the threaded prop adapter from 

the radial mount set. Comes complete with adapters for 

APC and GWS props and rubber O-ring for prop 

attachment. 

PM22005 Aluminum Adapters with O-Ring for Prop Saver $4.59 

Additional set of inserts and O-ring for PM22003 and PM22004. 

PM22006 O-Ring for Prop Saver .............................................. $2.59 

PM53001 8mm Prop Adapter 53xx 

Series .......................................... $14.99 

Designed specifically for use with Aeronaut folding 

propellers and Ramoser Vario Props. Allows the use 

of propellers drilled for 8mm and propellers with 

thinner hubs. Replaces the 12mm shaft radial prop 

adapter that comes with the AXI 53 series motors. 

Specs: 2 oz. weight, 1-3/32" diameter, 

1-3/16" case length, 3.17mm (1/8") 

shaft. Includes pre-connected 3 motor 

wire gold connector set. 

Shown with 

Optional Radial 

Mount 

Radial Mount System 

to mount your 

AXI OUTRUNNER "Backwards" 

Each set includes a mounting flange, propeller 

adaptor, securing collar and screws to mount 

theflange to the motor. RMS allows the motor to be 

mounted in front of a firewall. 

PM22002 AXI RMS set for 2208 and 2212 Series 

Motors ...........................................................$14.99 

PM280802 AXI RMS set for 2808 and 2814 Series Motors ..$16.99 

PM282002 AXI RMS set for 2820 and 2826 Series Motors ..$16.99 

PM41002 AXI RMS set for 4120 and 4130 Series Motors .....$21.99 

Keep your OUTRUNNER 

running cooler for long 

motor life 

PM22008 Model Motors "Cooler" 

for AXI 22xx Series OUTRUNNERS .. $14.99 

PM28006 Model Motors "Cooler" for AXI 2820 

and 2826 OUTRUNNERS .. $14.99 

PM41003 Model Motors "Cooler" 

for AXI 4120 and 4130 Series 

OUTRUNNERS ................... $18.99 

Use these to keep your AXI OUT- 

RUNNER cool in helicopter applications. 

Can also be used in aircraft to promote additional air movement. 

High performance carbon prop 

for AXI 5330/F3A motor 

PR2013 20 x 13" F3A Carbon Fiber 

Propeller ................................. $119.99 

Developed especially for the AXI 5330/F3A 

motor and tested by world class F3A pilots. Best for F3A pattern type 

aircraft with a flying weight of less than 10 pounds. Highest performance 

is reached with this prop and the AXI 5330/F3A with 10S lipoly 

pack of 20-25C cells (capacity from 3700 mAh to 5000 mAh). 

Custom wood prop for large scale 

airplanes and 

AXI 5360/20 OUTRUNNER 

PM5360P Model Motors 

30"x 20" Wood Prop for AXI 5360 

OUTRUNNER ............................ $94.99 

Custom wooden prop designed specifically for use with the AXI 5360/20 

OUTRUNNER. Recommended for slow, realistic flying of large scale 

planes up to 33 pounds. When used with 10s Lipoly battery pack and a 

Jeti Advance Pro 90 Amp controller, this motor and prop combination will 

reach approximately 3200 RPM, providing very realistic prop sounds and 

extremely high efficiency for low speed flights. 


Premium OUTRUNNER Brushless motors 

without the premium price 

Atlas has a complete line of OUTRUNNER brushless motors that 

can power any airplane from small parkflyers and indoor airplanes, 

up to 1.60-1.80 sized giants spinning 24" diameter propellers. 

Whatever your airplane, Atlas has an OUTRUNNER motor that will 

fly it better than a glow engine. 

All Atlas OUTRUNNER motors: 

• Have a Full 2-year warranty 

• INCLUDE a Radial Mounting System (RMS) 

• Use strong Neodym magnets for superior power 

• The 23 and 29 series motors have 2 ballbearings 

• The 40 and 50 series motors have 3 ballbearings 

• Can easily replace your old and underpowered glow engine 

INCLUDES: Radial Mounting system and aluminum prop nut. 

OUTRUNNER motor replacement for “Speed 400” size airplanes 

AM2308 Atlas 400 Brushless OUTRUNNER Motor ............ $29.99 

OUTRUNNER motor replacement for “Speed 400/480” size airplanes 


OUTRUNNER replacement for “Speed 480/500” size airplanes 


.15 glow equivalent-but more powerful 

AM2909 Atlas 15 Brushless OUTRUNNER Motor .............. $39.99 

.25 up to .40 glow equivalent 


.40 up to .46 glow equivalent 


.46 glow equivalent OUTRUNNER motor 

AM4020 Atlas 46 Brushless OUTRUNNER Motor ............. $99.99 





1.20 glow equivalent OUTRUNNER motor 

AM5030 Atlas 120 Brushless OUTRUNNER Motor ......... $179.99 


AM2308 1100 3s lipo - 9x6 2-3s LiPoly 12 Amp 7-18 oz. Parkflyer 

AM2312 920 3s lipo - 10x5 2-3s LiPoly 12 Amp 12-24 oz. Sport Pattern 

AM2317 1090 3s lipo - 8x8 2-3s LiPoly 20 Amp 20-40 oz. Sport Aerobatic 

AM2909 1240 3s lipo - 9x5 2-3s LiPoly 20 Amp 30-48 oz. .25 Sport/Trainer 

AM2921 990 3s lipo - 12x6 3-4s LiPoly 45 Amp 60-80 oz. .40 Sport/Scale 

AM2927 910 4s lipo - 13x6 3-4s LiPoly 45 Amp 65-95 oz. .46 Sport/Scale 

AM4020 500 5s lipo - 14x9 5-7s LiPoly 75 Amp Opto 80 -125 oz. .46-.60 Sport/Scale 

AM4030 420 6s lipo - 16x10 5-8s LiPoly 75 Amp Opto 140-215 oz. .60-.90 Sport/Scale 

AM5020 215 10s lipo - 19x12 10s LiPoly 90 Amp Opto To 230 oz. .90-1.20 Sport/Scale 

AM5030 190 10s lipo - 21x14 10s LiPoly 90 Amp Opto To 250 oz. 1.20-1.60 Sport/Scale 

66 


FULL 2-YEAR WARRANTY 

Fully programmable brushless 

motor controllers 

Atlas motor controllers will work with all types of brushless motors. 

Atlas controllers come pre-programmed and are ready to use when 

you receive them. Additional controller adjustments are available; most 

can be accessed and adjusted with your transmitter, but for easier programming, 

use the included program card to set all your options. This 

only takes a few seconds. Settings can easily be changed at the flying 

field without the need for additional instructions or a computer. 

Atlas Black Opto Controllers 

When you need more than 3 Lithium cells in your flight pack it is necessary 

to use an "Opto" controller. Opto controllers do not have a BEC 

(battery eliminator circuit) to power your radio receiver and servos. An 

alternate power supply is necessary. Use either a standard 4.8V 

receiver battery pack or a UBEC (KFS001 - KFS003). A UBEC is a 

device that reduces the high voltage of your flight batteries and supplies 

regulated power suitable to run your receiver and servos. 

Every Atlas programmable brushless motor controller has: 

A 2-Year Warranty 

A FREE Programming Card 

Over-temperature protection 

Works with any brushless motor 

Can be used in airplanes or helicopters (has governor mode) 

An easy to use programming guide 

Every Atlas controller can be programmed for: 

NiCd, NiMH or Lithium Batteries (Type and number of cells) 

Hard or Soft Start 

Motor Timing: 

Auto Detect 

Soft "Inrunners" (0 to 7 degrees) 

Hard "Outrunners" (22 to 30 degrees) 

Brake: On/Off 

Motor Rotation: 

Normal 

Reverse 

Low Voltage Cut Off: 

Ignore 

Reduce Power 

Hard Cut Off 

Governor Mode (Helicopter use) 

ABC08 Atlas 8 Amp 

Brushless Controller ................... $29.99 

1-3/8" x 7/8" x 3/8", 11 grams (1/3 oz.). 8 

Amps continuous, for 5 to10 NiCd or 

NiMH, 2 to 3 Lithium cells. BEC can run 4 

servos on 6 cell battery, 2 servos on 10 

cells. Order connector set MJ21011. 


Brushless Controller ..................... $34.99 

1-3/8" x 7/8" x 3/8",11 grams (1/3 oz.). 12 

Amps continuous, for 5 to 10 NiCd or NiMH, 

2 to 3 Lithium cells. BEC can run 4 servos 

on 6 cell battery, 2 servos on 10 cells. 

Order connector set MJ21011. 


Brushless Controller ...................... $38.99 

1-7/8" x 7/8" x 3/8", 19 grams (5/8 oz.). 20 

Amps continuous, for 5 to 10 NiCd or NiMH, 

2 to 3 Lithium cells. BEC can run 4 servos 

on 6 cell battery, 2 servos on 10 cells. Order 

connector set MJ21011. 


Brushless Controller ..................... $56.99 

1-7/8" x 15/16" x 1/2", 31 grams (1-1/8 oz.). 

35 Amps continuous, for 5 to 10 NiCd or 

NiMH, 2 to 3 Lithium cells. BEC can run 4 

servos on 6 cell battery, 3 servos on 10 

cells. Connectors included. 


Brushless Controller ... $67.99 

3-1/8" x 1-1/16" x 3/8", 39 grams 

(1-1/3 oz.). 45 Amps continuous, 

for 5 to 10 NiCd or NiMH, 2 to 3 

Lithium cells. BEC can run 5 servos 

on 6 cell battery, 3 servos on 10 

cells. Connectors included. 


Brushless Controller ............ $99.99 

3-1/8" x 1-1/16" x 3/8", 50 grams (1-3/4 

oz.). 75 Amps continuous, for 5 to 10 

NiCd or NiMH, 2 to 3 Lithium cells. BEC 

can run 5 servos on 6 cell battery, 3 

servos on 10 cells. Connectors included. 


Brushless Controller ............ $67.99 

3-1/8" x 1-1/16" x 3/8", 34 grams (1-1/5 

oz.). 45 Amps continuous, for 6 to 16 

NiCd or NiMH, 2 to 5 Lithium cells, 

Connectors included. No BEC. 


Brushless Controller ........ $99.99 

3-1/8" x 1-1/16" x 3/8", 46 grams (1- 

5/8 oz.). 75 Amps continuous, for 6 to 

16 NiCd or NiMH, 2 to 5 Lithium cells, 

Connectors included. No BEC. 


Brushless Controller ................. $199.99 

2-5/8" x 2-1/16" x 11/16", 115 grams (4 oz.), 

90 Amps continuous, for 16-30 NiCd or 

NiMH, 5-10 Lithium cells. Use with large 

OUTRUNNER motors in demanding applications. 

Solid screw-in-place installation, 3 rubber 

grommet shock mounts. 2.5mm silicone 

insulated wire on motor leads, 3mm silicone 

insulated wire on battery leads. 13" long wire to receiver. Connectors 

included. No BEC. 

Large 2" x 2" x 5/16" aluminum heat sink 

dissipates excess heat to keep the controller 

in a safe operating temperature 

range. 

ABC01 Spare Atlas Programming Card 

8-75 Amp ............................................... $4.99 

1-1/4" x 1-7/8" x 1/16" card with jumper connectors 

programs the 8A to 75A Atlas controllers. 

Pick the program options that you want by moving 

the jumpers to the appropriate pins on the card, plug your Atlas 

controller into the Program Card, switch on the controller for a few seconds 

and your settings have been programmed; a "Beep" tone verifies 

the process. A 4.8V receiver battery is required to program the Opto 

controllers. Changes take only seconds to perform; no other support 

equipment or computer is required. 

With the Programming card you can select: 

NiCd and NiMH or Lithium battery (Type and cell count) 

Hard or Soft Start 

Hard or Soft Cutoff 

Timing: Low for Inrunners, High for OUTRUNNERS, 

or Auto Detect 

Brake On or Off 

Direction of Rotation of Motor 

Governor Mode for Helicopters 

ABC02 Spare Atlas Programming Card 90 Amp .................... $4.99 

1-1/4" x 1-7/8" x 1/16" card with jumper connectors programs the 90A 

Atlas controllers. Same functions as ABC01 with the addition of settings 

for up to 10 cell lithium batteries that the 90A controller is able to 

use. 


Brushless Motors & Controllers 

Little motor - BIG power 

GR6531 Graupner Inline 400 8.4V Brushless Motor ................... $97.99 

20mm diameter, 40mm case, 10mm 

free shaft length, 2.3mm shaft diameter, 

weighs 65g, Kv of 3060 RPM/Volt. 

Has two mounting holes that are 

16mm apart with M2.5 threads. Small 

2-pole motor for use in the Graupner 

Nemesis (GR9554) with a 4.75x4 

CAM prop. Also suitable for use in 

mini hydroplane boats that use 31mm props. Best with 2 cell Lipo and 12 amp 

controller. 

OUTRUNNER motor for use in Ducted Fan 

MT2235 SFM OUTRUNNER Brushless Motor ....................... $39.99 

25.3mm (1") diameter, 31mm (1-1/4") 

long, 2.3mm shaft, 9 pole motor with a 

Kv of 3500. Motor mounts with 4-3mm 

screws on 16mm diameter spacing. 

Powerful high torque motor for use in 

our 66mm ducted fan (MT1028). Use 

with 3 cell LiPo battery and 18A Jeti 

Brushless controller. 

For 3D aerobatic models to 9-1/2 oz., 

airplanes to 16 oz. 

SK400XT Esskay OUTRUNNER Motor, 

400XT ........................................... $29.99 

1" diameter, 1" long without shaft, 3mm 

shaft, weighs 1-1/2 oz. Comes complete 

with radial mounting adapter for mounting 

in front of a firewall. Attach the motor to 

the Jeti speed control using our 1.8mm 

gold connectors MJ21011, or wire directly. 

Use MJ4698 3mm Ultralight collet prop 

adapter. For lightweight 3D models to 9- 

1/2 oz. and other airplanes to 16 oz. Use 

9x3.8 to 11x3.8 prop and 2-3 LiPo cells 

and an 8 amp controller. Good to 10 amps 

but draws only 3 amps in hovering a 

model of 8-1/2 oz. 

Powerful high RPM 

brushless 

inrunner 

for ducted fans 

SFM4700 SFM 20mm Kv 4700 

Brushless Motor ........... $59.99 

20mm diameter, 40mm long, 

2.3mm shaft, Kv=4700, 20 amps 

maximum sustained current. Use in ducted fans of 50-59mm size. When 

used in our 56mm "XF-Fan (ETH550), powered with a 3 cell Lipo, the 

motor draws about 19 amps. 

NEW! 490 Watt EDF Motor for 4-cells 

FWF90137 Outrunner Brushless Motor 3500Kv for EDF….... $39.99 

28mm diameter, 63mm long (excluding 

10mm shaft), 3mm shaft, 3.1 oz, 

3500 Kv. Motor comes pre-connected 

with 3.5mm male connectors. Design 

has cooling holes at the front and a 

ventilated aerodynamic rear section 

for good cooling and drag reduction. 

Fits our 64mm fan (FWF90210) and 

will produce more than 2.2 pounds of 

thrust when mated to a 4-cell lipo battery 

and a 45A controller. Actual current 

draw is about 33A on 4-cells. Front mount is 20mm dia. with 4 

mounting holes on 16mm centers. Requires 4-2.5mm screws (not 

included). Rear mounting ring is about 24mm dia. and stabilizes the 

motor inside the fan. The main part of the fan remains in the cooling 

air stream. 

With full 2 year warranty 

Proportional Motor Controls for 

Brushless Motors 

Jeti ECO: low cost 

brushless motor controllers are 

the easiest to use 

Jeti's ECO line of brushless 

controllers with BEC (battery 

eliminator circuit) offers the 

sport modeler a low cost 

choice in high quality controllers. 

Controllers "autodetect" 

the number of poles in 

the motor and pick the optimal timing. The settings have been reduced 

to four modes simply selected by jumper, no programming required. 

Controllers "auto-detect" full throttle position. Each unit can run up to 4 

servos when used with up to 3 lithium cells. Controllers have temperature 

overload protection and will cut the power to the motor if controller 

reaches 100-110 degrees C. All Jeti controllers come with a 2-year free 

replacement warranty! 

Mode 1: NiCad/NiMH – Brake Off. Non-active brake with slow down 

type low voltage cut-off down to 5 volts or 0.7 volts per cell. 

Mode 2: NiCad/NiMH – Brake On. Active brake with hard type low voltage 

cut-off at 5 volts or 0.7 volts per cell. 

Mode 3: LiIon/LiPoly – Brake Off. Non-active brake with slow down 

type low voltage cut-off. Minimum voltage 6 volts for 2 cell packs, 9 

volts for 3 cell packs. 

Mode 4: LiIon/LiPoly – Brake On. Active brake with hard type low voltage 

cut-off. Minimum voltage 6 volts for 2 cell packs, 9 volts for 3 cell 

packs. 

For 2-3 Li cells, 

to 8 Amps 

JEE008 Jeti "ECO 8" 8 Amp 

Controller for 

Brushless Motor .......... $39.99 

1" x 5/8" x 3/16", 7 grams (1/4 

oz.), 8 Amps continuous, for 2 to 3 Lithium cells. BEC can run a maximum 

of 4 servos. The brake can be turned on and off using your transmitter. 

The low voltage cutoff is set for 3V per cell. 

For 6-10 Ni, 2 to 3 Li cells, to 12 Amps 

JEE012 Jeti "ECO 12" 12 Amp Controller 

for Brushless Motor ......................... $43.99 

1-3/4" x 1" x 1/4", 10 grams (1/3 oz.) 12 amps 

continuous, for use with 6-10 NiCad or NiMH, 

2-3 Lithium cells. BEC can run 4 servos with 

up to 3 Lithium cells, or 3 servos if 10 

NiCad/NiMH are used. 

For 6-10 Ni, 2 to 3 Li cells, to 18 Amps 

JEE018 Jeti "ECO 18" 18 Amp Controller 

for Brushless Motor ........................... $47.99 

1-3/4" x 1" x 5/16", 21 grams (3/4 oz.) 18 amps 

continuous, for use with 6-10 NiCad or NiMH, 

2-3 Lithium cells. BEC can run 4 servos with 

up to 3 Lithium cells, or 3 servos if 10 

NiCad/NiMH are used. 

For 6-10 Ni, 2 to 3 Li cells, to 25 

Amps 

JEE025 Jeti "ECO 25" 25 Amp Controller for 

Brushless Motor ................................. $52.99 

1-3/4" x 1" x 7/16", 28 grams (1 oz.) 25 amps 

continuous, for use with 6-10 NiCad or NiMH, 2-3 Lithium cells. BEC 

can run 5 servos on 4-6 NiCad/NiMH cells or 2 Lithium, 4 servos with 

7-8 NiCad/NiMH cells or 3 Lithium, or 3 servos if 10 NiCad/NiMH are 

used. 

68 


Jeti Brushless Controllers 

Full 2 year warranty 

Jeti “ADVANCE Pro” – Versatile, Reliable, Rugged 

the name to remember for brushless motor controllers 

Easy to program Jeti “ADVANCE Pro” motor controllers—-no computer necessary 

Jeti “ADVANCE Pro” controllers are ready to use when you receive them. Brake, Motor Timing and Battery Type can be programmed with your 

transmitter. To access the full range of adjustments, the use of a program card is required. The ADVANCE Pro can be set using the ADVANCE Pro 

program card. All settings can be programmed in seconds without the need for a computer. All settings are retained after the flight batteries are disconnected. 

ADVANCE Pro controllers come is all sizes and types. Controllers with a linear BEC (Battery Elimination Circuit) are available up to 70 amps. For 

applications with more servos, there are the Opto controllers that do not have a BEC and require the addition of a separate power supply for the 

radio system and servos. The 70 Pro SB has a switch-mode BEC and can power up to 6 servos on up to a 6-cell Lipo. 

Whether you are flying an indoor model of a few grams or a giant scale model, your best choice for reliability and performance is the Jeti ADVANCE 

Pro line of controllers. 

The ADVANCE Pro controllers provide flexible control of the cut off voltage for a complete range of battery types. You set the level that best suits 

your needs. 


Proportional Motor Controls 

NEW! Easily program all the features of your ADVANCE Pro controller 

JAP01 Jeti ADVANCE Pro Program Card ......................................................................................... $7.99 

1-3/4” x 3” x 1/8”. Program card for ADVANCE Pro controllers is backward compatible for use with ADVANCE 

Plus controllers. Easily program your ADVANCE Pro controller at home or at the flying field in seconds without 

the need for a computer. Simply set the jumper plugs to the desired settings and plug the controller into the card 

via the throttle plug to fix your settings. ADVANCE Pro controllers have expanded features not found in the 

ADVANCE Plus series. Support for NiXX, LiXX, or LiFe cells, expanded brake functions, expanded cut-off voltage 

options, 3 acceleration choices, 3 timing options and change rotation from the card. Card will work with 

either ADVANCE Pro or ADVANCE Plus controllers, the additional features of the ADVANCE Pro are only available 

with this controller. 

Light weight 8A controller with BEC 

JAP08 Jeti ADVANCE Pro 8 Amp Brushless Controller ............................................................................................. $58.99 

1 x 5/8 x 3/16”, 6 grams (1/4 oz.), 8 Amps continuous, for 6 to 8 NiCd or NiMH, 2 to 3 Lithium cells. 5V, 2A BEC can run 4 servos 

on 2 cell Lipo, 3 servos on 3 cells. Order connector set MJ21011. 

Light weight 12A controller with BEC 

JAP12 Jeti ADVANCE Pro 12 Amp Brushless Controller ........................................................... $62.99 

1 x 5/8 x 1/4”, 9 grams (1/3 oz.), 12 Amps continuous, for 6 to 10 NiCd or NiMH, 2 to 3 Lithium cells. 5V, 2A BEC can run 

4 servos on 3 cell Lipo, 3 servos on 4 cells. Order connector set MJ21011. 

18A programmable controller with BEC 

JAP18 Jeti ADVANCE Pro 18 Amp Brushless Controller .......................................................................................... $66.99 

1-1/4 x 7/8 x 5/16”, 21 grams (3/4 oz.), 18 Amps continuous, for 6 to 10 NiCd or NiMH, 2 to 3 Lithium cells. 5V, 2A BEC can run 4 

servos on 3 cell Lipo, 3 servos on 4 cells. Order connector set MJ21021. 

18A controller with switch mode BEC for up to 4 Lipo’s 

JAP18SB Jeti ADVANCE Pro 18 Amp Controller w/Switch Mode BEC ................................... $72.99 

1-1/4 x 7/8 x 5/16”, 21 grams (3/4 oz.), 18 Amps continuous, for 6 to 12 NiCd or NiMH, 2 to 4 Lithium cells. 5.5V, 2.5A Switch 

mode BEC can run 4 servos on up to a 4 cell Lipo. Order connector set MJ21021. 


JAP30 Jeti ADVANCE Pro 30 Amp Brushless Controller ........................................................................................... $76.99 

1-5/8 x 7/8 x 5/16”, 28 grams (1.0 oz.), 30 Amps continuous, for 6 to 10 NiCd or NiMH, 2 to 3 Lithium cells. 5V, 2A BEC can 

run 4 servos on 3 Lipo, 3 servos on 4 cells. 3.5mm female connectors pre-installed, 3.5mm male mating connectors included. 


JAP30SB Jeti ADVANCE Pro 30 Amp Controller w/Switch Mode BEC ..................................... $86.99 

1-5/8 x 7/8 x 5/16”, 28 grams (1.0 oz.), 30 Amps continuous, for 6 to 12 NiCd or NiMH, 2 to 4 Lithium cells. 5.5V 3A BEC can 

run 5 servos on up to 4 Lipo’s. 3.5mm female connectors pre-installed, 3.5mm male mating connectors included. 


JAP40 Jeti ADVANCE Pro 40 Amp Brushless Controller ........................................................................................... $99.99 

2-3/4” x 1” x 3/8”, 35 grams (1-1/4 oz.), 40 Amps continuous, for 6 to 12 NiCd or NiMH, 2 to 4 Lithium cells. 5V, 3A BEC can 

run 5 servos on 3 Lipo, 4 servos on 4 cells. 3.5mm female connectors pre-installed, 3.5mm male mating connectors included. 

40A Opto programmable controller 

JAP40P Jeti ADVANCE Pro 40 Amp Opto Brushless Controller .............................................. $99.99 

2-3/4” x 1” x 3/8”, 35 grams (1-1/4 oz.), 40 Amps continuous, for 6 to 16 NiCd or NiMH, 2 to 6 Lithium cells. There is no BEC 

on this controller, use a receiver battery or an external BEC like the JE512 Max BEC. 3.5mm female connectors pre-installed, 

3.5mm male mating connectors included. 


JAP40SB Jeti ADVANCE Pro 40 Amp Controller w/Switch Mode BEC ................................................................... $109.99 

2-3/4” x 1” x 3/8”, 35 grams (1-1/4 oz.), 40 Amps continuous, for 6 to 18 NiCd or NiMH, 2 to 6 Lithium cells. 5.5V, 5A BEC can 

run 6 servos on up to 6 Lipo’s. 3.5mm female connectors pre-installed, 3.5mm male mating connectors included. 


JAP70 Jeti ADVANCE Pro 70 Amp Brushless Controller ....................................................... $129.99 

2-3/4” x 1” x 7/16”, 56 grams (2 oz.), 70 Amps continuous, for 6 to 12 NiCd or NiMH, 2 to 4 Lithium cells. 5V, 3A BEC can run 

5 servos on 3 Lipo, 4 servos on 4 cells. 3.5mm female connectors pre-installed, 3.5mm male mating connectors included. 

70A controller with Switch Mode BEC for up to 6 Lipo’s 

JAP70SB Jeti ADVANCE Pro 70 Amp Controller w/Switch Mode BEC .................................................................... $139.99 

2-3/4” x 1” x 7/16”, 56 grams (2 oz.), 70 Amps continuous, for 6 to 16 NiCd or NiMH, 2 to 6 Lithium cells. The BEC on this controller 

is a switching type with a 5.5V output and a max. current of 5A. Capable of running 6 standard servos on up to 6 lipo’s. 

3.5mm female connectors pre-installed, 3.5mm male mating connectors included. 

77A Opto controller for up to 10 Lipo’s 

JAP77P Jeti ADVANCE Pro 77 Amp Opto Brushless Controller ........................................... $175.99 

2-3/4” x 1” x 7/16”, 60 grams (2-1/10 oz.), 77 Amps continuous, for 12 to 30 NiCd or NiMH, 3 to 10 Lithium cells, up to 12 

LiFe cells. There is no BEC on this controller, use a receiver battery or an external BEC like the JE512 Max BEC. 3.5mm 

female connectors pre-installed, 3.5mm male mating connectors included. 

90A Opto controller for up to 10 Lipo’s 

JAP90P Jeti ADVANCE Pro 90 Amp Opto Brushless Controller ................................................................................ $257.99 

2-9/16” x 2-3/16” x 11/16”, 90 grams (3-1/5 oz.), 90 Amps continuous, for 14 to 30 NiCd or NiMH, 4 to 10 Lithium cells, up to 

12 LiFe cells. There is no BEC on this controller, use a receiver battery or an external BEC like the JE512 Max BEC. 3.5mm 

female connectors pre-installed, 3.5mm male mating connectors included. 

70 


For the man who wants TOTAL 

control over his motor 

Two types - with Switch Mode 

BEC or Opto type for high cell count packs 

Jeti SPIN controllers give you unprecedented control of the programming 

for your brushless motors. The regular "SPIN" series includes 

Switch Mode BEC's that allow you to run up to 8 servos. When high 

voltage flight packs are required, use the "SPIN Opto" controllers. SPIN 

controllers can be used in airplanes, sailplanes, helicopters, or 3D helicopters 

(constant RPM). SPIN controllers can be quickly programmed 

without a computer; the SPIN BOX is all that is needed. SPIN controllers 

have a Data Logging function that lets you check and fine tune 

the setup of your airplane or helicopter. Readings for Peak controller 

temperature, Maximum current, Minimum current, RPM, Motor run time, 

and many other parameters are recorded and can be viewed right on 

the SPIN BOX after a flight. This allows you to make adjustments 

immediately and fly again to see the results. Fine-tuning your motor 

and propeller has never been easier. 

SPIN Controllers with Switch Mode BEC 

SPIN11 Jeti SPIN 11 Amp Electronic Speed 

Control ................................... $79.99 

1-1/4" x 15/16" x 1/4", weighs 12 grams (2/5 

oz.), 5-12 NiMH/NiCd, 2-4 Li-Poly, 5-17V, 5.5V 

BEC w/max. current 2.5A, up to 6 servos. 

SPIN22 Jeti SPIN 22 Amp Electronic Speed 

Control ................................. $84.99 

1-1/4" x 15/16" x 5/32", weighs 18 grams (3/5 

oz.), 5-12 NiMH/NiCd, 2-4 Li-Poly, 5-17V, 5.5V 

BEC w/max. current 2.5A, up to 6 servos. 

SPIN33 Jeti SPIN 33 Amp Electronic 

Speed Control .................................... $99.99 

1-5/8" x 15/16" x 1/4", weighs 30 grams (1 oz.), 

5-14 NiMH/NiCd, 2-5 Li-Poly, 5-21V, 5.5V BEC 

w/max. current 3A, up to 7 servos. 

Overview of SPIN Opto Controllers 

When high voltage battery packs are required for your aircraft it is necessary 

to use an "Opto" controller. Opto controllers do not have a BEC 

(battery eliminator circuit) to power your radio receiver and servos. A 

separate power supply is required: use either a 4.8 - 6V standard 

receiver battery or a UBEC (KFS001 - KFS003). A UBEC is a device 

that regulates high voltage from your flight batteries and supplies 

power at a voltage suitable to run your receiver and servos. SPIN Opto 

controllers are programmed either with your transmitter or with the 

"SPIN BOX", just like the regular SPIN controllers. The SPIN Opto controllers 

have a dedicated programming plug that simplifies program 

setup and data retrieval. 

SPIN Opto for high cell count aircraft---includes 

data logging 


Speed Control ........................................... $159.99 

2"x1"x9/16", weighs 45 grams (1-5/8 oz.), 14-30 

NiMH/NiCd, 4-10 Li-Poly, 12-42V. 2.5mm input 

cables, 2.5mm output cables. Includes 3.5mm connectors. 


Speed Control ........................................... $204.99 

2"x1"x9/16", weighs 55 grams (1-7/8 oz.), 14-30 

NiMH/NiCd, 4-10 Li-Poly, 12-42V. 2.5mm input 

cables, 2.5mm output cables. Includes 3.5mm connectors. 


Speed Control ........................................... $214.99 

2-1/2"x2-1/8"x5/8", weighs 105 grams (3-3/4 oz.), 

14-36 NiMH/NiCd, 4-12 Li-Poly, 12-50V. 4mm input 

cables, 2.5mm output cables. 2"x2"x5/16" aluminum 

heat sink dissipates excess heat. Solid screw-inplace 

installation with 3 rubber grommet shock mounts. Includes 

3.5mm connectors. 


Speed Control ............................................. $298.99 

2-1/2"x2-1/8"x5/8", weighs 105 grams (3-3/4 oz.), 14- 

36 NiMH/NiCd, 4-12 Li-Poly, 12-50V. 4mm input 

cables, 2.5mm output cables. 2"x2"x5/16" aluminum 

heat sink dissipates excess heat. Solid screw-inplace 

installation with 3 rubber grommet shock mounts. Includes 

3.5mm connectors. 


Speed Control ................................... $137.99 

2" x 1" x 7/16", weighs 40 grams (1-2/5 oz.), 6- 

18 NiMH/NiCd, 2-6 Li-Poly, 6-26V, 5.5V BEC 



Speed Control ...................................... $198.99 

2" x 1" x 1/2", weighs 70 grams (2-1/2 oz.), 6-24 

NiMH/NiCd, 2-8 Li-Poly, 6-34V, 5.5V BEC 



Speed Control .................................... $183.99 

2" x 1" x 1/2", weighs 70 grams (2-1/2 oz.), 6-18 

NiMH/NiCd, 2-6 Li-Poly, 6-26V, 5.5V BEC 

w/max. current 5A, up to 8 servos. 70 amp continuous 

current. 

Overview of Jeti SPIN Controllers with 

Switch Mode BEC 

Jeti "SPIN" controllers with Switch Mode BEC can be programmed 

either by your RC transmitter or with the "SPIN BOX". When you use 

your RC transmitter, you choose what type of airplane or helicopter 

that you are flying, and the general settings for that type of aircraft will 

be automatically set. For complete control in setup and to view recorded 

flight data you will need the "SPIN BOX", a self contained unit with 

digital readout that allows you to fine tune the controller setup for your 

aircraft. No computer is used. All input and data retrieval is immediate 

and can be read directly from the "SPIN BOX". 


Speed Control ........................................... $547.99 

2-1/2"x4-11/16"x1-1/16", weighs 270 grams (9-1/2 

oz.), 24-40 NiMH/NiCd, 6-14 Li-Poly, 18-59V. Two 

sets of 4mm input cables (2 positive and 2 negative 

cables), 4mm output cables. Due to the high voltage the SPIN200 has 

an ancillary circuit that prevents sparking when the controller is being 

connected to the flight batteries. The negative poles of the flight pack 

must be plugged to the two 4mm black wires first, then the thin 

(1.5mm) red wire must be plugged into the positive side of the flight 

pack. Only then can the two 4mm red wires be plugged into the flight 

pack. The controller has two 2-1/2"x2-1/2"x3/16" heat sinks and four 

standoff mounts to allow free airflow around all sides of the unit. No 

connectors are included. 

Program your SPIN controller, also a 

powerful testing tool 


Programming Control .................... $39.99 

3-5/16" x 2-7/8" x 5/8", 2-1/2 oz. 

When connected to a Jeti SPIN controller: Allows you 

to custom program your SPIN controller. Provides a 

readout screen for the data that is stored in the SPIN 

controller after a flight. Simple and intuitive to use, you 

will not need to drag a huge set of instructions or a 

computer to the flying field with you. 

Jeti SPIN Box when not connected to a Jeti SPIN Controller 

When used by itself, the Spin Box is a powerful testing tool: 

Measure receiver channel output pulse widths. 

Measure servo transfer speeds, either unloaded or in actual use in the 

aircraft. 

Servo pulse generator, center your servos without receiver and transmitter. 

Servo-cycler, check the function of your servos, from 10 to 990 cycles. 


Lithium Polymer Battery Packs 

Why choose the All-New Thunder Power G4 Pro Lite V2 battery 

• Lightest and Smallest battery possible at this discharge rate 

• 20% more power and better cycle life than original Pro Lite batteries 

• Cells matched by internal resistance, capacity and voltage = maximum power delivery 

• Small light packs for Indoor and Parkflyer models up to big packs for Giant Scale models 

• Continuous discharge rates of up to 20 times capacity, short burst rates of up to 40C 

• Charge rates of up to 3C with approved charger/balancer combinations 

The G4 Pro Lite V2 batteries are a terrific choice for the modeler who wants to maintain 

peak performance in his airplane or helicopter and at the same time choose the smallest 

and lightest battery available in this discharge category. The new 4 th generation packs are 

a leap forward from the earlier Pro Lite batteries and provide 20-30% more useable 

capacity for better performance and longer flight times. The cycle life of the battery is 

improved providing long-lasting value and performance. 

72 



Thunder Power G4 Pro Lite V2 battery 

TP2502SJPL2 2-Cell 7.4V 250mAh “Pro Lite V2” 20C w/JST ....... $11.99 

TP2503SJPL2 3-Cell 11.1V 250mAh “Pro Lite V2” 20C w/JST ..... $16.99 

TP3502SJPL2 2-Cell 7.4V 350mAh “Pro Lite V2” 20C w/JST ...... $13.99 

TP3503SJPL2 3-Cell 11.1V 350mAh “Pro Lite V2” 20C w/JST .... $19.99 







TP13502SPL2 2-Cell 7.4V 1350mAh “Pro Lite V2” 20C ............... $24.99 

TP13503SPL2 3-Cell 11.1V 1350mAh “Pro Lite V2” 20C ............. $34.99 

TP13504SPL2 4-Cell 14.8V 1350mAh “Pro Lite V2” 20C ............. $49.99 

TP21002SPL2 2-Cell 7.4V 2100mAh “Pro Lite V2” 20C ............... $34.99 

TP21003SPL2 3-Cell 11.1V 2100mAh “Pro Lite V2” 20C .............. $47.99 

TP21004SPL2 4-Cell 14.8V 2100mAh “Pro Lite V2” 20C .............. $69.99 

• Sport Race series batteries are capable of continuous discharge rates up to 25C and 

burst discharge rates up to 50C, delivering higher voltage, under typical and heavy loads, 

than most 15C to even 30C batteries making them perfect for backyard bashing or racing 

• Cells are built using premium quality Japanese-made materials, including the latest in 

super-fine substrate (nano) materials and technology to offer vastly superior power, 

capacity and cycle life delivery never before seen 

• Cells are matched by true internal resistance, capacity and voltage for maximum power 

and cycle life delivery with packs PROUDLY ASSEMBLED IN THE USA by Thunder 

Power RC in Las Vegas, NV 

• Impact-resistant, hard-case housings with carbon fiber finish and a unique wire lead exit 

design that allows the leads to be positioned flush with the top or end of the battery for 

easy drop in fit in most cars and trucks 

• Equipped with Thunder Power balance connector and wire leads compatible with all 

Thunder Power balancers and chargers with balancers 

TP26002SPL2 2-Cell 7.4V 2600mAh “Pro Lite V2” 20C ..................................... $44.99 

TP26003SPL2 3-Cell 11.1V 2600mAh “Pro Lite V2” 20C .................................... $62.99 

TP26004SPL2 4-Cell 14.8V 2600mAh “Pro Lite V2” 20C .................................. .$84.99 

TP26005SPL2 5-Cell 18.5V 2600mAh “Pro Lite V2” 20C ................................. $104.99 


TP33002SPL2 2-Cell 7.4V 3300mAh Pro Lite V2 20C ......................................... $54.99 

TP33003SPL2 3-Cell 11.1V 3300mAh Pro Lite V2 20C ....................................... $79.99 

TP33004SPL2 4-Cell 14.8V 3300mAh Pro Lite V2 20C ...................................... $99.99 

TP33005SPL2 5-Cell 18.5V 3300mAh Pro Lite V2 20C ..................................... $129.99 

TP33006SPL2 6-Cell 22.2V 3300mAh Pro Lite V2 20C ..................................... $159.99 

TP39002SPL2 2-Cell 7.4V 3900mAh Pro Lite V2 20C ......................................... $62.99 




TP43503SPL2 3-Cell 11.1V 4350mAh “Pro Lite V2” 20C ................................... $99.99 





TP50003SPL2 3-Cell 11.1V 5000mAh “Pro Lite V2” 20C .................................. $114.99 




Sport Race 25C Car and Truck Packs w/Traxxas Connectors 

TP43002SSRT 2-Cell 7.4V 4300mAh “Sport Race” 25C LiPoly Pack w/Traxxas conn. ............... $74.99 

TP43003SSRT 3-Cell 11.1V 4300mAh “Sport Race” 25C LiPoly Pack w/Traxxas conn. ........... $114.99 

TP54002SSRT 2-Cell 7.4V 5400mAh “Sport Race” 25C LiPoly Pack w/Traxxas conn. ................ $89.99 

TP54003SSRT 3-Cell 11.1V 5400mAh “Sport Race” 25C LiPoly Pack w/Traxxas conn. ............. $139.99 

TP80002SSRT 2-Cell 7.4V 8000mAh “Sport Race” 22C LiPoly Pack w/Traxxas conn. ................... $159.99 



Why choose the All-New G4 Pro Power 30 battery 

• Continuous discharge rates of up to 30 times capacity, short burst rates of up to 60C 

• Replaces the eXtreme V2 series but with 25% more power and better cycle life at a lower cost 

• Cells matched by internal resistance, capacity and voltage = maximum power delivery 

• Potent power for ducted fan applications and high powered 3D helicopters 

• The series of choice for top pilots like Alan Szabo, Jason Krause, Lukas Riva and many others 

• Charge rates of up to 3C with approved charger/balancer combinations 

• Includes 1-year manufacturers warranty and 50% off damage replacement program 

The G4 Pro Power 30 batteries are ideal for powerful EDF 

applications where their high discharge ability combined with 

light weight really unleashes the performance of your jet. The 

Pro Power 30 battery provides added power for extreme 3D 

helicopter pilots and any high powered aircraft application. 

The new 4 th generation packs are a leap forward from the 

earlier eXtreme V2 batteries and provide 25% more power 

and 4 times the cycle life. 

74 

TP13502SP30 2-Cell 7.4V 1350mAh “Pro Power” 30C ........ $28.99 

TP13503SP30 3-Cell 11.1V 1350mAh “Pro Power” 30C ...... $40.99 






TP22506SP30 6-Cell 22.2V 2250mAh “Pro Power” 30C .... $119.99 




Pro Power Series 






TP33005SP30 5-Cell 18.5V 3300mAh “Pro Power” 30C..... $144.99 







Lipoly Charger for 1-3 cells 

ETC2020 Smart Charger 

for 1-3 Li-Poly Cells ........................... $33.99 

3-3/4 x 1-7/8 x 1/2". Charges 1-3 Lithium cells at 

a charge rate from 110mA to 1200mA. Use 

jumper connections to select the number of cells 

to be charged and the charge rate. If you select 

the wrong number of cells or hook the battery up backwards, the charger’s 

red LED will blink repeatedly and it will not start the charge. 

Charging process is automatic and a green LED indicates completion. A 

JST Female connector for connecting the battery to be charged is 

included. 

Charges 1-3 Lipoly Cells and 1-8 

Ni-Cad/NiMH Cells 


1-3 Li-Poly or 1-8 NiCd/NiMH Cells .. $39.99 

3-3/4 x 1-7/8 x 1/2". Charges 1-3 Lithium cells 

or 1-8 Ni-Cad/NiMh cells at a charge rate from 

110mA to 1200mA. Use jumper connections to select the number of 

cells to be charged and the charge rate. If you select the wrong number 

of cells or hook the battery up backwards, the charger’s red LED 

will blink repeatedly and it will not start the charge. Charging process 

is automatic and a green LED indicates completion. A JST Female 

connector for connecting the battery to be charged is included. 

Charge 1-5 LiPoly cells at 

up to 3-1/2 amps 

ETC2700 AnyRC Li-Poly Smart 

Charger, 1-5 Cells ............... $49.99 

4" x 1-3/4" x 3/4". Charges 1-5 

lithium cells at rates up to 3.5 amps. 

Push button operation allows you to 

easily set the cell count and charge 

rate. LED's indicate cell count, 

charge rate, and charging status. Audible beeps and solid LED light 

indicate that charging is complete. Reverse polarity protection (input 

and output). Connects to a 12-volt battery or power supply with the 

included alligator clips. Banana plugs with a JST charge connector are 

included. Rugged aluminum case with good cooling for trouble free 

operation. 

Charge 1 to 4 LiPoly cells at 

up to 2-1/2 amps 

TPC425 1-4 Cell LiPoly 

Charger .......................... $49.99 

4” x 1-3/4” x 5/8”. Charges 1-4 lithium 

cells at rates up to 2.5 Amps. Push button 

operation allows you to easily set the cell 

count and charge rate. LED’s indicate cell 

count, charge rate and charging status. 

Audible beeps and a solid LED light indicate 

that charging is complete. Reverse polarity protection (input and 

output). Connects to a 12 volt battery or power supply. Banana plugs 

with JST charge connector included. 

Easy to use automatic Lithium Polymer charger for 

1-4 cell packs-charges at up to 3 amps 

GR6437 Graupner "LiPo-Charger 4" 

Automatic 1-4 Cell Charger ... $29.99 

3-1/2" x 2" x 7/8". Fully automatic charger 

for Lithium Polymer battery packs with 

1 to 4 cells. Connect to your auto battery 

or a 12V power supply. Automatically 

detects the number of cells with 1 to 3 

cell packs, 4 cell packs must be manually 

set by push button. Charger auto 

detects the cell capacity and sets the 

charge current; the charge is monitored 

continuously through the charging 

process and the optimum charge rate maintained. LED's indicate 

charge status, blinking LED and audible beep indicates completion of 

charge. Maximum charge rate is 3 amps. Charger has safety protection 

for reversed polarity (input or output), low input voltage, incorrect cell 

count and incorrect cell type (eg. Ni-Cd/NiMh). 

Lithium Chargers 

Charges 1 to 5 Lithium cells, or 1 to 12 

NiCad/NiMH cells at up to 5 amps 

GR6412 Graupner Ultramat 12 

Automatic Charger ................... $124.99 

5-1/8" x 4-1/2" x 1-1/2". Micro-processor 

controlled fast charger, discharger and 

battery conditioner for Nicad, NiMH, 

Lithium Polymer, Lithium Ion, and Lead 

Acid batteries. Connects to any 12-volt 

power supply. Clear instructions explain 

the specific programs for charging each type of battery. Cut-off for 

Nicad and NiMH cells is by "Delta Peak" method. Lithium Polymer and 

Lithium Ion charging program uses the constant current/constant voltage 

method. Warnings for incorrect polarity, low input voltage, incorrect 

cell count and over time limit are shown on the display screen. Battery 

conditioning of Nicad and NiMH cells through repeated charge/discharge 

cycles is programmable for up to 5 cycles. Charges at up to 5 

amps and discharges at up to 1 amp. 

Charges up to 30 Nicads 

(at rates up to 7Ah), up to 30 NiMH batteries, 

up to 10 Lithium Cells, up to 24V Lead-acid 

GR6416 Graupner Ultra Duo Plus 30 

Automatic Charger .............. $229.99 

The ultimate field charger. 6”x5-3/8” 

1-5/8”, 26 oz. Recharges, conditions, 

balances, measures capacity of 

Nicads. Recharges, discharges to 

measure capacity of NiMH batteries. 

Charges, discharges to determine 

capacity of Lithium cells and Lead Acid batteries. Clear instructions, 

relatively easy to set. Can be adjusted to accept low car (input) battery 

voltage. For knowledgeable users this charger allows changing of 

Delta V for automatic cutoff, trickle current. Has adjustable safety 

timer, click sound when buttons are successfully pressed, buzzer 

sound for errors and completions. Allows separate charging of receiver 

or transmitter batteries. 

NEW! Multi purpose balance charger - charges LiPo/LiIon, 

NiCd/NiMH and Pb batteries 


Balance Charger ..................... $64.99 

5-5/8" x 3-3/8" x 1-3/8". Multi use charger 

for 1-5 LiIon/LiPo cells, 1-14 NiCd/NiMH 

cells, Pb 2-12V. Includes adapters for 

"Deans style" plugs, JST, Rx pack, glow 

plug lighter, and alligator clips. Balance 

plugs on end of unit are JST-XH type and compatible 

with many Asian battery packs. NOTE: When 

balance charging Lithium batteries, both the balance 

tap and the main power wires must be connected 

to the charger. 

Unit includes: 

Internal independent lithium battery balancer 

Employs an individual-cell-voltage balancer to maintain your pack in 

balance while charging. Balance individual cells during discharge 

During the discharge process, iC5 can monitor and balance each cell 

of the pack individually. An error message will sound and the process 

will be ended automatically if the voltage of any single cell is abnormal. 

Fast and Storage mode charging 

"Fast" charge will fully charge a lipoly battery in the shortest time. 

"Store" setting will charge the battery at approximately a 50% charge 

for long term storage. This prolongs the useful life of the battery. 

Charges various types of LiPoly cells 

Includes charging programs for Li-Ion and LiPo battery types. 


76 

Electric Accessories 

LiPo Cell Voltage/ 

Battery Chargers, Lithium (cont.): 

Balance Checker 

NEW! Keep your precious Li-Po and Li-Fe 

batteries in perfect balance 

NEW! Balance charger 

includes temp sensor and 

Thunder Power adapters 


Balance Charger ...................... $75.99 

5-5/8" x 3-3/8" x 1-3/8". Multi use 

charger for LiIon/LiPo/LiFe 1-6 cells, 

NiCd/NiMH 1-15 cells, Pb 2-20V. Includes 

adapters for "Deans style" plugs, JST, Rx 

pack, glow plug lighter, and alligator clips. 

Balance plugs on end of unit are JST-XH 

type and compatible with many Asian 

packs. An adapter for Thunder Power and 

Flight Power battery packs is included. 

Temperature probe included. NOTE: 

When balance charging Lithium batteries 

both the balance tap and the main power 

wires must be connected to the charger. 

NEW! Charge and Balance your Thunder Power 

and Flight Power Batteries on IC6 Chargers 

SRC510 TP/FP Adapter for IC6 Chargers ................................ $9.99 

1-1/8" x 2-1/8" x 1/2" Adapter for from 2S to 6S 

Thunder Power or Flight Power Lithium battery packs. 

Allows you to charge and balance your TP or FP 

packs with your IC6 Balance Charger or any charger 

or balancer that uses the JST-XH female connectors. 

NEW! Charge and Balance your Hyperion and 

PolyQuest Enerland Batteries on IC6 Chargers 

SRC513 HP/PQ Adapter for ........................................... $9.99 

1-1/8" x 2-1/8" x 1/2" Adapter for from 2S to 6S 

Hyperion or Poly Quest (Enerland) Lithium battery 

packs. Allows you to charge and balance your HP 

or PQ packs with your IC6 Balance Charger or any 

charger or balancer that uses the JST-XH female 

connectors. 

Battery Chargers, NiMH, NiCd 

Charge 5-7 cell tiny to large NiCad and 

NiMH packs at rates from 0.1 to 5 amps 

GR6419 Graupner 

Ultramat 5 Charger .............. $64.99 

Tiny and portable: 4.2”x2.4”x1”. From 

your 12V automobile battery, this 

automatically charges 5 to 7 cell 

packs. It charges nicad or NiMH 

packs at rates of 0.1A to 5A, then 

goes to a trickle charge when complete. Note that it will charge even 

the tiniest packs —100mAh packs, for example — safely. 

20, 30 or 40 amp 

Power Supplies 

HW1220 Power Force 20 ...... $58.99 

HW1230 Power Force 30 ...... $79.99 

HW1240 Power Force 40 ...... $99.99 

Plug into your 110/120V AC house current, 

then connect up to three 12V DC 

field chargers to it. Converts 110-120V 

AC power into clean 12V DC power. Converter will handle currents up 

to 20, 30, or 40 Amps. A pre-installed grounded AC power cord is 

included as well as output terminals that accept banana plugs. On/off 

switch with LED power indicator on front panel. 

MKS5003 Precision Battery Balancer with LCD Screen ...... $58.99 

3-5/8" x 2-3/8" x 5/8", weighs 2-1/2 oz. 

Compact Balancer/Discharger for 

Li-Polymer and Li-Fe battery packs. 

Keeping your batteries in perfect 

balance is the key to long battery life 

and getting the best performance from 

your packs. Precisely measures 

individual cell voltage and pack voltage 

in 2-6 cell packs. Will balance the voltages 

of all the cells in a pack with the 

touch of a button. Can also be set to discharge a pack to a voltage level 

chosen by you. Is perfect for lowering the overall pack voltage for long 

term storage. The balance function can be executed before, after, or 

during the charging process. 2-6 cell packs with the JST XH balance 

connector plug directly into the unit. (Works with all of our RTF airplane 

Lipo battery packs.) The voltage of each cell (to the hundredth of a volt) 

is displayed on the LCD screen. During the balance function, a symbol 

is displayed beside the cells being discharged. Easy to use with very 

intuitive interface, also includes easy to understand illustrated instructions. 

Receiver battery voltage can also be measured, but this requires 

an outside voltage source of 7.4-11V with a JST connector. 

A "Gas gauge" for your lipo packs 

Never launch a plane with a near empty pack again 

LBC400 "CellMeter-4" 2-4 Cell LiPo Cell Meter ..................... $99.99 

Test your valuable 2-4 cell LiPo packs quickly to determine their state 

of charge and their state of balance. LCD screen shows "fuel gauge" 

from empty to full and balance gauge showing state of balance. 

Second screen is activated by pressing a button. It shows: 

number of cells, voltage of pack, percentage of charge and individual 

cell voltages to .01 of a volt. Third screen (press button again) shows 

individual cell voltage to .001 of a 

volt. The balance connector on your 

battery plugs directly into CellMeter- 

4. If cell voltage is below 3.0 volts 

per cell or if cells are out of balance 

a warning message will flash on the 

LCD screen and a beep tone will be 

heard. The 2.5mm pin-spacing on 

CellMeter-4 connects directly to 

Poly-Quest, Art-Tech, RCer, RICCS, 

and E-Sky LiPo packs. 

LBC800 "CellMeter-8" 2-8 Cell LiPo Cell Meter ................... $134.99 

Same features as CellMeter-4 but will test 2-8 Cell LiPo packs. In 

addition the meter displays the voltage of the highest and lowest cells 

and displays the differential between them to .001 of a volt. 

LBCA25 Adapter for Thunder Power/Flight Power 2-5 Cell Packs 

....................................................................................................... $8.99 

Use this adapter for either CellMeter-4 or CellMeter-8 if testing 

Thunder Power or Flight Power batteries. 

LBCA26 Adapter for Thunder Power/Flight Power 2-3 and 6 Cell 

Packs ........................................................................................... $8.99 

Use with LBC800 CellMeter-8 only. Adapts 2, 3, or 6 cell packs to 

CellMeter-8. 4 and 5 cell packs use LBCA25. 

Keep your new Thunder Power lithium 

batteries balanced for long service life 

TPB205 Thunder Power 2-5 Cell LiPo 

Balancer .................................. $59.99 

3-5/8" x 1-1/2" x 1/2" Use with Thunder 

Power Lithium batteries. Auto detects the 

cell count from 2-5 cells. Plug your battery 

into the cell balancer to check the condition 

of your battery. Status is indicated by 

LED's, if an imbalance occurs the LED's 

flash. Battery can be returned to a balanced state by recharging at a 

reduced charge rate while monitoring with the cell balancer. Batteries 

can be charged with any Lithium battery charger. Monitoring your batteries 

while charging is safer too, the balancer monitors each cell in 

your pack and gives an audible warning if any cell exceeds 4.3V, 

charging must be halted immediately! Cell balancer indicates charge 

completion with an audible tone. 


"Micro" Class Motors 

GR6374 Graupner Speed 250, 7.2V ............. $9.49 

3/4"x5/8"x1-1/4", weighs 22 grams, 2mm shaft. Will 

spin a 4"x3" prop. 2 noise suppression capacitors 

included. 

“280” Class Motors 

For airplanes that weigh 10 to 16 oz. These are motors that consume 

from 15 to 60 Watts and about 2 to 8 Amps, have 2.0mm diameter 

prop shafts, are 24mm diameter, about 1-1/4” 

long, and weigh about 1.5 oz. 

GR6328 Graupner Speed 280, 6V …. $6.99 

Direct Drive for planes under 10 oz.: 

12 Watts, 6 Volts, 8,000 rpm, 6x4 prop, 4 

Amps, 3 oz. thrust. 

Geared for slow flying planes under 16 oz.: 

19 Watts, 9.6 Volts, 4:1 gear ratio, 9x7 prop, 3 



For airplanes that weigh up to 22 oz. These are motors that consume 

from 25 to 100 Watts and about 3 to 12 Amps, have 2.0mm diameter 

prop shafts, are 24.25mm diameter, about 1-1/2” long, and weigh 

about 1.8 oz. Order 3.0mm Mounting Screws HLH8730. 

GR3306 Speed 300, 6V ............................ $13.99 

Use geared only for Parkflyers to 20 oz.: 

70 Watts, 9.6 Volts, 5:1 gear ratio, 8x6 prop, 10 


GR7302 Speed 300, 7.2V ......................... $11.99 

Direct Drive for planes to 12 oz.: 

25 Watts, 8.4 Volts, 10,500 rpm, 4.9x4.3 prop, 3 



For airplanes that weigh up to 25 oz, sailplanes to 45 oz. These are 

motors that consume from 35 to 75 Watts and about 6 to 10 Amps, 

have 2.3mm diameter prop shafts, are 27.6mm diameter, about 1-1/2” 

long, and weigh about 2.3 oz. Order 2.5mm Screws HLH8725. 

GR1794 Speed 400, 7.2V ...................... $7.99 

Direct Drive for planes under 14 oz.: 

41 Watts, 8.4 Volts, 15,400 rpm, 5x4 prop, 7 


GR3321 Speed 400, 6V ..........… $7.99 


65 Watts, 8.4 Volts, 15,400 rpm, 5x4 prop, 

10 Amps, 10 oz. thrust. 

Geared for planes to 25 oz. sailplanes to 

45 oz.: 

70 Watts, 12 Volts, 4:1 gear ratio, 10x7 

prop, 9 Amps, 18 oz. thrust. 

FK5202 “Long Can” 400 Motor…$15.99 


171 Watts, 12 Volts, 14,700 rpm, 6x4 prop, 


Geared for planes to 25 oz., sailplanes to 

45 oz.: 

103 Watts, 12 Volts, 4:1 gear ratio, 11x7 

prop, 8 Amps, 20 oz. thrust. 

Speed 400 motor with LiPoly compatible 

controller built in 

GR6505 Graupner Speed 400 PLUS, 

7.4V with Controller ............... $64.99 

7.4 to 11.1V, 10A brushed Speed 400 

motor, 2.3mm shaft. Motor controller is 

soldered to the motor, has prop brake. 

Motor is wired for right hand rotation. 

Controller is LiPo compatible, recommended 

for 2 cells with a 5.5x4 prop. 

Pre-connected with a JST plug for your 

flight battery. 

Electric Motors 


Motors that consume from 45 to 170 Watts and about 10 to as much 

as 25 Amps. These have 3.2mm (1/8”) diameter prop shafts, are 

29.1mm diameter, 1-7/8” long and weigh about 3.5 oz. Order 

Mounting Screws HLH8725 for 480’s. 

GR6304 Speed 480, 7.2V .................. $28.99 

Direct Drive for fast planes to 18 oz.: 



"500" Class Motors 

1-3/8" diameter, about 2-1/4" long, 3.17mm (1/8") shaft and weighs 6 

oz. High RPM motor for use in racing planes or geardrives. For airplanes 

that weigh up to 50 oz., sailplanes to 65 oz. Order HLH8730 

mounting screws. 

GR1799 Speed 500, 7.2V ............... $15.99 

Direct Drive for planes to 40 oz.:163 Watts, 

8.4 Volts, 8,600 rpm, 8x4.5 prop, 19 Amps, 

15 oz. thrust. Geared for planes to 50 oz., 

sailplanes to 65 oz.: 199 Watts, 12 Volts, 3:1 

gear ratio, 11x7 prop, 16 Amps, 25 oz. thrust. 


For airplanes that weigh up to 50 oz., sailplanes to 70 oz. These are 

motors that consume from 130 to 300 Watts and about 15 to 30 Amps, 

have 3.2mm (1/8”) diameter prop shafts, are 1-3/8” diameter, about 

2-1/4” long, and weigh about 8 oz., Order HLH8730 Mounting Screws. 

GR1786 Speed 600, 9.6V ...................... $18.49 


210 Watts, 12 Volts, 9,000 rpm, 8x4.5 prop, 17 


GR1793 Speed 600, 7.2V ….................. $18.49 


193 Watts, 8.4 Volts, 8,900 rpm, 8x4.5 prop, 22 


Geared for planes to 55 oz., sailplanes to 75 oz.: 

294 Watts, 12 Volts, 2:1 gear ratio, 10x6 prop, 24 


GR3302 Speed 600BB Turbo, 12V 

.................................................................. $29.99 


233 Watts, 14.4 Volts, 10,000 rpm, 8x4.5 prop, 


Geared for planes to 50 oz., sailplanes to 80 oz.: 

215 Watts, 16.8 Volts, 2:1 gear ratio, 10x7 prop, 



Big heavy motors with huge power output per dollar spent — these are 

a bargain in Watts per $. These are motors that consume from 350 to 

500 Watts and about 25 to 33 Amps. The ballbearing versions have 

internal cooling fans. These are 1-11/16” diameter, 2-5/8” long, have 

5mm output shafts, and weigh 12.5 oz. Order HLH8740 mounting 

screws for these. 

GR3308 Speed 700 Turbo, 9.6V … $29.99 


390 Watts, 12 Volts, 7,700 rpm, 10x6 prop, 



120 oz.: 402 Watts, 12 Volts, 2:1 gear ratio, 

12x7 prop, 27 Amps, 40 oz. thrust. 

GR6316 Speed 700 BB Turbo, 8.4V 

…......................................................... $44.99 

Direct Drive for planes to 60 oz. sailplanes to 

100 oz.: 




110 oz.: 399 Watts, 12 Volts, 2:1 gear ratio, 14x7 prop, 32 Amps, 44 

oz. thrust. 


GR6317 Speed 700 BB Turbo, 12V 

…........................................................ $44.99 

Direct Drive for planes to 60 oz., sailplanes to 

100 oz.: 372 Watts, 14.4 Volts, 5,900 rpm, 



150 oz.: 496 Watts, 19.2 Volts, 2:1 gear ratio, 


Proportional Motor 

Controls for Motors 

with Brushes 

Jeti Controllers for Brush motors -- 

for flyers who hate reading operating manuals 

Jeti brings you more control options but fewer directions for you to follow. 

You can program each of these controllers to follow one of 4 

operating conditions by simply changing the location of a little jumper 

connector on the controller. The 4 operating conditions are: 

1. Propeller Brake ON, Battery type NiCd or NiMh, Motor cut-off at 4 

Volts (or 0.7V per cell) 

2. Prop Brake OFF, Battery type NiCd or NiMh, gradual Motor cutoff 

at 4 Volts (or 0.7V per cell) 

3. Prop Brake ON, Battery type Li-polymer, gradual Motor cut-off at 

minimum voltage 5.2V with 2 Li cells, and 9V with 3 Li cells 

4. Prop Brake OFF, Battery type Li-polymer, gradual Motor cut-off at 

minimum voltage 5.2V with 2 Li cells, and 9V with 3 Li cells 

These controllers all have: high rate variable switching (1000-4000 

Hz), with high output BEC (Battery Eliminator Circuit: powers receiver 

and servos from the big motor battery) that allows a lot of servos to 

operate, user-programmable settings as listed above, automatic adjustment 

of the throttle range, safe “power on” arming (keeps motor from 

starting when not expected), “soft start up” to prevent propeller or gearbox 

damage, automatic shut down when signal is lost, and limited maximum 

braking action to prevent prop or gear damage. They also have 

automatic current limiting that will allow the current to your motor to 

exceed the normal level by about 5 Amps before cutting off. 

For 4 to 8 Ni, 2 to 3 Li cells, 

6 to 8 Amps 

JES006 Jeti 6 Amp Microprocessor ....... $23.99 

0.7”x0.6”x0.2”, 0.2 oz. 

Brushed and BEC’s 

For electric heli’s, 6-12 cells, no motor cutoff 

JE300HE Jeti 30 Helicopter 

Microprocessor ........................................ $43.99 

For 6-12 cells, 30 Amps continuous current, 

BEC for recvr. and up to 3 servos, no motor cutoff 

in BEC to avoid sudden landings when battery 

goes down, has current limiter protection that stops 

motor if it is blocked, no prop brake, 1000hz. 

switching frequency, adjustable pot for motor start 

point, 1 oz., 43x22x10mm. Self adjusts to transmitter motor start point, 

gives more linear throttle response. 

JE450 Jeti 45 Microprocessor ........... $52.99 

For 8 to 30 cells, 45 Amps continuous current 

and 60 Amps for up to 30 seconds. No BEC. 

8 to 30 cell controller for up to 60 Amps 

JE60 Jeti 60 ........................................... $77.99 

For 8-30 cells, 60 Amps continuous current, 

no BEC, has current limiter protection that stops 

motor if it is blocked, on/off brake, adjustable pot 

for motor start point, LED for brake set, off, and 

max power, 2400hz. switching frequency, 1-3/8 

oz., 51x30x10mm. 

“Add-on” BEC 

NEW! Reliable power to your receiver and servos 

JE512 Jeti MAX BEC, 5.5-16V 

Input, 5-6V 10A Output .... $49.99 

MAX BEC is a linear regulator designed 

to supply consistent power to the radio 

system and servos in a model aircraft. 

Either Nicad/NiMH or Lipoly/LiIon cells 

supply input voltage, 2 Lithium cells are 

recommended. MAX BEC includes a 

charging connector, batteries can be 

charged in place if desired. Output voltage of 5V or 6V can be chosen 

by jumper connection. Two leads connect the BEC to your receiver 

this provides redundancy and reduces the amp load on each connection. 

The connectors can be plugged into any channel on your receiver. 

The BEC includes a “safe” switch; in the event of mechanical damage 

or switch failure the system fails in the ON position and has no 

impact on the BEC operation. 

For 4 to 8 Ni, 2 to 3 Li cells, 12 to 15 

Amps 

JES012 Jeti 12 Amp Microprocessor ...... $33.99 

1”x0.75”x0.3”, 0.53 oz. 

For 4-8 Ni, 2 to 3 Li cells, 

20 to 22 Amps 

JES020 Jeti 20 Amp Microprocessor ....... $37.99 

1”x0.75”x0.3”, 0.53 oz. 

For 6-12 Ni, 2 to 4 Li cells, 

30 to 35 Amps 

JES030 Jeti 30 Amp Microprocessor .... $43.99 

1.3”x1”x0.3”, 1 oz. 

NEW! Safe power to your receiver and servos, 

20A output, dual redundancy 

JEM02 Jeti MAX BEC 2 ................................................ $99.99 

MAX BEC is designed to power the 

receiver and servos in the model. MAX 

BEC is a linear voltage stabilizer with 

an adjustable output voltage. The output 

voltage is set using a jumper and 

in one of four positions: 5.0V, 5.4V, 

5.7V or 6.0V. MAX BEC can be powered 

using NiXX and Li–XX cells. MAX 

BEC also gives an indication of used 

capacity of the battery with four LEDs. 

Part of MAX BEC is an electronic switch, which uses a highly efficient 

type of MOSFET transistor. The main benefits of the MAX BEC include 

a high voltage rating (to 12 cells NiXX) and low current in the off state 

(170 mA). The analog voltage stabilization does not contribute to radio 

interference. 

BEC for large electric models 

ABB450 Atlas Switch Mode BEC, 8-42V 

......................................................... $29.99 

78 

For 6 -12 Ni, 2 to 4 Li cells, 

45 to 50 Amps 

JES045 Jeti 45 Amp Microprocessor ...... $61.99 

1.3”x1”x0.3”, 1 oz. 

2-3/8" x 1" x 7/16", 23 grams. Input voltage 

range from 8 to 42 volts will work with 3 to 

10 cell lithium battery packs. Output is 

4 amps continuous with a peak of 5 amps. 

Output voltage is selectable for 5 or 6 volts 

by a jumper plug. Power the receiver in your aircraft and up to 10 servos 

from your flight batteries. Eliminates the extra weight of a separate 

battery pack for your radio and servos. Use with any "Opto" controller or 

a regular BEC equipped controller by disabling its BEC function. 


Charging Lithium Polymer batteries 

just got safer 

LS100 "LipoSack" Fire Retardant Lipo Charging 

Bag ............................................................. $23.99 

9" wide and 12" long, weighs 4 oz. LipoSack will 

allow you to charge most Lithium Polymer packs 

and reduce the effects of a Lithium Polymer 

battery charging mishap. Place LipoSack on a 

non-flammable surface during charging process. 

Route charging leads through vent at the top seam of the LipoSack. 

Close top flap of LipoSack and press hook and loop closure. Charge 

your battery using proper charging practices. Always monitor your 

charging batteries and never leave them unattended. It is always recommended 

that you charge your batteries in a well ventilated area away 

from flammables and children. 

Electric Test Equipment 

Measure your electric drive performance 

AST101 Astroflight Super Whatt Meter 

............................................................ $54.99 

4”x 2”x 7/8”. Measures your motor’s and battery’s 

Volts (to 60V), Amps (to 70A), Watts (up 

to 5,000), and NiCad Amp-hour Capacity (up 

to 9Ah). Plug in Whatt Meter between your 

NiCad and motor controller to measure your 

system’s performance. Easy to use: all information is displayed on the 

screen. No switches, knobs or user input required. It has two Astro 

connectors which you can use or replace with others. 

Specialized Electric Motor Mounts 

Electric motor mounting 

plates 

Fiberglass Motor Mounts for Electric motors: 

HLSIA503 1-1/8” dia., for Speed 400 ............................................... $5.99 

HLSIA511 1-9/16” dia., for Speed 500/540/600 .................................. $8.99 

HLSIA546 1-3/4” dia, for Speed 700 ............................................... $8.99 

HLSIA520 1-3/4” dia. for Mega, Ultra, 3 holes .................................. $8.99 

HLSIA538 1-15/16” dia., for Mega, Ultra, 3 holes ............................. $8.99 

Glue these into fiberglass fuselages with thick CA or Stabilit Express. Perfect 

fit on the motors and their mounting screws. 

Rock solid mounts for large 

OUTRUNNER motors 

AMM400 Atlas Mount for .40-.60 Size 

OUTRUNNERS .......................................... $18.99 

Adjustable from about 3-3/4" to 5-1/4" from firewall 

to front of mount. Fits AXI 41 series motors and 

others with the same mount spacing. 

AMM500 Atlas Mount for .60-1.20 Size 

OUTRUNNERS ................ $22.99 

Adjustable from about 4-1/4" to 6" from firewall to 

front of mount. Fits AXI 41 and 53 series motors 

and others with the same mount spacing. 

Heavy-duty anodized aluminum motor mounts provide 

rock solid support for your large OUTRUN- 

NER motors. Each comes with screws and nuts to 

assemble the adjustable mount, and blind nuts and bolts for attaching 

mount to your firewall. The easiest way to convert your larger, glow 

powered airplane to OUTRUNNER power. 

Sturdy mount for the large AXI motors 

PM41001 Aluminum Motor Mount 

for AXI 28 and AXI 41 Series 

Motors ......................................... $21.99 

Three piece anodized aluminum mount, adjustable for 

length 3-1/4” to 3-3/4”, height 2”, width 2-1/2”. Front 

plate pre-drilled for the 28 and 41 series AXI motors. 

Lightweight yet strong comes with screws and nuts for attaching the 

front mount to the sides. Requires 4 bolts to attach to your firewall. 


Universal mounting system for 

.40-.90 size Glow to Electric 

conversions 

AMM111 Aluminum Motor Mount 

System for OUTRUNNERS, 

40pc. ................................... $17.99 

Mounts all OUTRUNNER motors that have a radial mount, to the firewall 

of your airplane. The aluminum spacers are about 1/2" diameter 

with a 5/32" hole for the long bolts. The 40 piece package includes 4 

pieces each of: 3/16", 3/8", 1/2", 3/4", and 1" long spacers, and 1", 1- 

9/16", 2" and 3-1/8" long 4mm hex head screws and 4mm blind nuts. 

The maximum length of the Motor Mount is 2-7/8". 

Hardware to mount an OUTRUNNER motor 

Tube Nylon 

Spacers, 1/2” 

diameter 

HLH8852 1/8” Long Spacer, 4 pcs. .......................................... $1.00 



HLH8855 1” Long Spacer, 4 pcs. ............................................. $1.40 

Stainless Steel Machine Screws 

HLH8875 3”, 8-32 Phillips Roundhead Machine 

Screw, 4 pcs. .............................................................................. $2.50 

HLH8876 4”, 8-32 Phillips Roundhead Machine 

Screw, 4 pcs. .............................................................................. $4.50 

Nuts and Washers 

HLH8860 8-32 Blind Nuts, Zinc Plated Steel, 4 pcs. .............. $1.00 

HLH8861 8-32 Nyloc Nuts, Stainless Steel, 4 pcs. ................. $1.00 

HLH8862 Stainless Steel Washer, 4 pcs. ................................. $0.30 

Stick motor mount for AXI and 

Atlas OUTRUNNERS 

AMM010 10mm Stick Mount for 

OUTRUNNER Motors ............. $6.99 

Weighs less than 5 grams. Includes 4 

screws for mounting the motor. Machined 

aluminum motor mount for AXI 22 and Atlas 

23 series motors (or other motor with Speed 

400/480 mount spacing, 16mm/19mm). Can 

be screwed to the 10mm stick that is included with many models, 

avoiding the need for a radial mount. Can be mounted in either a pusher 

or tractor orientation. 

Horizontal mounts for 

400, 500, 600 motors 

HLAN2096 Horizontal Mount for 400 motors ............................... $7.99 

HLAN2097 Horizontal Mount for 500, 600 motors ....................... $8.99 

Electric Flight Computer Program 

ElectriCalc for Windows! Shows 

you how your motor, batteries, 

gearbox, and prop will fly your 

electric airplane! 

ECALC2 ElectriCalc Program, 

Version 2.2, for Windows ............ $34.99 

An easy to use program with Windows display on your pc. Enter the size 

and weight of your airplane. Pick a motor from Ecalc’s data base or add 

your own motor specs, select the number and type of cells, add a gearbox 

if you want, then a propeller. SEE instantly how well the combination 

will FLY! Change any value and SEE the results of the change in the 

performance figures. Thrust, rate of climb, current flow (will your 30 Amp 

motor controller be adequate), airspeed, efficiency, time of the motor 

run. Reduce the “throttle” setting to see how much power you can save. 

Ecalc is the answer to an electric flyer’s questions. Program comes on 

a CD and works with Windows 95 or later operating systems. 


80 

To 35 Amps: Powerpole Connectors! 

SER003 Powerpole 

Connectors, pk/4 .................... $2.99 

1” long. Pack of 2 Red, 2 Black. Neither 

male nor female but universal. The plastic 

bodies join together in a variety of ways for polarization purposes. 

Solder your wires into the big 1/8” ID hole in the silver-plated contact. 

Reasons to use Powerpole Connectors: (1) Resistance of the mated 

connectors is very low (this prevents loss of power). (2) Large high 

capacity wires easily fit into the holes in the pins. 

40 Amps and Higher: 

Polarized Ultra Plugs 


Connectors, pair .............................. $3.49 

Male and Female connectors with shrink tubing. 

Highly efficient, small, lightweight, high-power connector. 

DEA1302 Deans Ultra Plug, Male, 2 pcs. ................................ $3.99 

DEA1303 Deans Ultra Plug, Female, 2 pcs. ............................ $2.99 

Deans Ultra Plug lead 

FMAC709 Deans Ultra Charge 

Lead ........................................... $4.99 

Polarized Deans Ultra plug pre-soldered to 

heavy gauge wire. 

“Gold Stecker” connectors with polarized housings! 

HLFK6326 Kavan Polarized “Gold Stecker” 

Connectors, 2 sets ............................ $7.99 

Will take huge wire — up to 4.7mm OD or 

4mm sq.. For 40 Amp constant current and 

much higher short term current. 

(similar to photo) 

Gold Plated connectors to connect 

Jeti Brushless motors to your non- 

Jeti brushless controller. 

JEC001 Jeti 3.5mm Gold Plated Female 

Connector, pack of 3 ........................... $3.99 

JEC002 Jeti 3.5mm Gold Plated Male Connector, pk of 3 .... $6.49 

1/2” long, 3.5mm diameter. This is the same connector that comes on 

our Jeti 30 Amp and larger controllers. Works well up to 70 amps — 

very low resistance. 

High amp connectors 

AST525 Astro Zero Loss 

Connectors, 1 pair ...................... $14.99 

Good for up to 50 amp continuous, bursts to 75 

amps. Fits wire to 13 gauge. Weight 10g./pair. 

3 Sizes of gold single pin 

connectors 

3 male and 3 female in each package, 

with insulating heat-shrink tubing. These 

are primarily for the hookup of the 3 leads 

of brushless motors, but also fine for battery and charger leads. We 

estimate that these will handle currents of 10, 25, and 40 Amps respectively. 

The 3 sizes fit 18, 16, and 14 Ga. wire respectively. 

MJ21011 Gold Connectors, 1.8mm, 3 sets ............................. $7.99 



Wire for Electric Flight 

Extremely light and flexible small wire as used on 

slowflyer motor controllers 

JE050B Black Slowflyer Wire 

.5 Sq. mm, 1 Meter ........... $3.69 

JE050R Red Slowflyer Wire 

.5 Sq. mm, 1 Meter ........... $3.69 

JE050Y Yellow Slowflyer Wire 

.5 Sq. mm, 1 Meter ........... $3.69 


Wire for Slowflyers, Parkflyers, Speed 400, and 600 motors 

HLA99041 20 ga. Red & Black Wire, 18” ................................... $3.69 

For Slowflyers, current to 6 Amps. Use DEA003, DEA002, DEA002P 

Connectors. 


For Speed 400, current to 15 Amps. Fits connector HLFK4003 


For Speed 600 and larger, constant current to 30 Amps, higher for 

short duration. Use Connectors SER003, HLFK6326. 

HLA99025 16 ga. Red & Black Wire, 18” .................................. $4.19 

For Speed 400, current to 20 amps. High-flex silicone. Fits connector 

HLFK4003. 

The BEST electric flight hookup wire. 

The 1.5mm wire has 392 copper strands; 

the 2.5mm has 651, and the 4.0mm has 

1,036 strands! The silicone insulation 

withstands 356 degrees F. and cuts 

cleanly with a knife. Most useful is the 

2.5 Sq. mm size which fits Powerpole connectors well. 

HLAN5741 1.5 Sq. mm (Small), 2 meters each, 

Red and Black wire ................................................................. $13.79 

HLAN5743 2.5 Sq. mm (Powerpole), 2 meters each, 


HLAN5745 4.0 Sq. mm (F3E), 2 meters each, 


Graupner wire for electric flight 

GR3390 1.5mm 2 Wire, Red & Black, 78” .......................................... $6.59 

GR3389 2.5mm 2 Wire, Red & Black, 78” .......................................... $8.59 

2.5mm 2 wire is for motors over 150 watts. 1.5mm 2 wire is for motors under 150 

watts. 

Heat shrink tubing for 

electrical connections 

HLA99011 8” Long 

Heat Shrink Tubes, 3 ...... $2.79 

1/16, 3/32, 1/8” diameter tube shrink when soldering iron is touched to 

them. Strengthens and insulates wire connections. 

HLA99013 8" Long Heat Shrink Tubes, Large, 2 .................... $2.49 

3/16", 1/4", one piece of each size, 8" long. 

Interference-reducing Capacitors 

At the time that you solder wires to an 

electric motor install these to reduce radio 

interference from the motor. The small 

capacitors are to be soldered from the motor 

case to the motor terminals. The large one 

should be soldered between the motor 

terminals. 

GR3584 Small Capacitor, 47mf, 10 pcs. ...................................... $5.29 

GR3588 Large Capacitor, 470mf ................................................. $2.89 

POT100 3 pcs. Motor Capacitor, 100mf ...................................... $2.19 

Connect multiple Lithium packs to 

increase voltage, 

capacity or amperage 

Genuine Deans Ultra Plugs 

DEA7001 Parallel Module with Deans Ultra 

Connectors ................................................................................. $12.99 

Plug up to 4 Lithium packs into a parallel connector to increase the 

capacity. The output capacity (mAh) will be: the capacity of one pack 

times the number of packs plugged in. By increasing the capacity of the 

overall pack you also increase the number of amps that can be drawn 

from the pack. Ex: one PQ21503 pack can be discharged at up to 43 

amps, two PQ21503 packs in parallel have a capacity of 4300 mAh and 

can be discharged at up to 86 amps. The only additional connection 

required is the connection from the module to the speed control. Packs 

should be charged individually and not in parallel. 

DEA7002 Series Module with Deans Ultra Connectors ...... $12.99 

Plug up to 4 Lithium packs into a Series Module to increase the voltage. 

The output voltage will be: the voltage of one pack times the number of 

packs plugged in. Ex: To obtain a 10S pack (ten cells in series), plug two 

5 cell packs into the Series Module, the resulting output voltage will be 

2 times that of the individual pack but the capacity of the pack will remain 

the same as a single pack. The only additional connection required is the 

connection from the module to the speed control. 



Electric Ducted Fans 

Lightweight 56mm ducted fan for small jets 

MT1029 Turbo Fan 56mm Ducted Fan Unit ... $22.99 

56mm rotor diameter, 73mm outside diameter, plastic 

tube is 42mm long, 76.3mm overall length when 

assembled. Accepts up to 20mm diameter motor with 

screw mount spacing of 16mm and is suitable for the (SFM4700), 4700 

Kv brushless inrunner motor. Inlet nacelle has a 20mm depth, is 73mm 

wide with a 52mm opening. Comes with plastic impeller impregnated 

with carbon fibers, aluminum spinner, motor mounting screws and inlet 

ring. Shaft diameter for fan is 2.3mm. Using the suggested motor, this 

fan will produce approximately 15 oz. of thrust using a 3 cell 11.1V LiPoly 

battery at 16 amps. 

Small fan—Big power, 

over 20 oz. of thrust 

ETH550 "XF-Fan" 56mm Ducted Fan .... $24.99 

56mm inside diameter, 71.34mm outside diameter 

with inlet ring attached, 31mm long, 21mm inside 

diameter of motor housing. 3-bladed rotor, 

aluminum rotor adapter for 3mm shaft, motor 

mounting screws and allen-wrench included. 

Injection molded fan unit with smooth intake 

ring for high thrust. Unit weighs 1 oz. 

ETH551 Accessory 

Set for "XF-Fan" Ducted Fan .............. $4.99 

Plastic mount, zip tie and screws for mounting 

fan. Vacuformed exit duct and engine nacelle. 

For use on 10 x 10mm stick mount. 

Replacement fan unit for Alfa jets 

ALF5101 EDF 60/15 Mk. 2 Ducted Fan 

........................................................ $46.99 

59mm rotor diameter, 61mm outside diameter, 

carbon tube is 49mm long, 87mm overall 

length when assembled. Designed for 

standard Speed 300 power this improved 

design now produces 6.7 Oz. thrust -- 

almost an ounce more thrust with a Speed 300 on 7 cells than the earlier 

version did on 8 cells. This makes for a lighter model and better 

performance. Even greater power can be achieved with a brushless 

motor. Will accept a motor of up to 25mm diameter. The rotor is drilled 

for a 2mm motor shaft. 

Alfa Ducted Fans for more powerful 

brushless motors 

ALF5103 Alfa EDF 60/25 

Ducted Fan ......................... $48.99 

59mm rotor diameter, 61mm outside 

diameter, carbon tube is 50mm long, 

87mm overall length when assembled. 

Weighs 30 grams without 

motor. Designed for motor with 200W 

input. The fan can power models up 

to 21 ounces maximum weight. Will 

accept a motor of up to 25mm diameter. 

The rotor is drilled for a 2mm motor shaft (rotors for other shaft 

sizes available separately). The static thrust measurements with this 

fan are dramatically higher than with the EDF 60/15. This power comes 

at a cost: the higher currents (20-22 amps) require the use of larger 

speed controls (30 amp recommended) and Lipo batteries suitable to 

this amp load. 

ALF5103M Alfa EDF 60/25 Ducted Fan for Mega 16/7/x ....... $52.99 

The same fan unit as ALF5103 but with the motor housing enlarged to 

fit a Mega 16/7/4 or 16/7/5 motor. The rotor plug is bored to 3.17mm 

for the Mega motor. Use the 16/7/4 with 3 Lipo cells and the 16/7/5 

with 4 lipo cells. Static thrust measurements from 17-1/2 oz. (3-cells) to 

21 oz. (4-cells) have been recorded. 

ETH5512 "XF-Fan 5100" Brushless Motor 

for Fan ................................................ $34.99 

21mm diameter, 43.7mm long, 2.35 oz., 3mm 

shaft, Kv=5100, weighs 2.35 oz.. Use with 3 

Lipo cells capable of supplying 25 amps. 

Produces over 20 oz. of thrust at 11.1V when 

used with ETH550 Fan. Also for use in the Alfa Mig and F-86 jets, and 

with the VAS055 fan unit. Use a JAP30, or JEE025 JETI speed controller 

with this motor. 

ETH552 Aluminum Prop Shaft Adapter, 2.3mm ..................... $4.39 

Micro ducted fan for Speed 

280’s and 300’s 

WMC0012 Micro Fan for 2.0mm 

Shaft Motors ............................................. $28.99 

Rotor diameter is about 49mm. The housing that 

holds the motor is 25mm inside diameter which 

accommodates Speed 280’s and Speed 300’s. 

Ducted fan for 480’s 

WMF0013 Mini Fan 480 for 3.2mm Shaft 

Motors ....................................................... $54.99 

68mm rotor diameter, 72mm outside diameter of tube 

and 93mm dia. front fairing ring. The motor housing is 

29mm inside diameter and fits 480’s and Mega 

Motors Brushless 400’s. 

Ducted Fan for Speed 

500-600’s and Larger 

WMD0013 Midi Fan for 3.2mm Shafts .. $74.99 

WMD0015 Midi Fan for 5mm Shafts ...... $74.99 

88mm rotor diameter, 93mm outside diameter of 

tube and 114mm dia. front fairing ring. The fan for 

3.2mm shafts fits all Speed 500 or 600 motors. 

Spare parts for Alfa Ducted Fans 

ALF51012 Rotor Plug for 

2mm Shafts ................ $3.99 

ALF51013 Rotor Plug for 

3mm Shafts ................ $6.99 

ALF51021 3-Bladed Rotor 

for EDF 60/15 ............. $8.99 

ALF51031 5-Bladed Rotor for EDF 60/25 .............................. $13.99 

ALF51023 Spinner for EDF 60/xx ............................................ $3.99 

Fan for Speed 400-480 and 

brushless motors 

MT1028 66mm Ducted Fan Unit .... $22.99 

66mm (2-9/16") inside diameter, 60mm (2- 

3/8") long with inlet ring, 81mm (3-3/16") outside 

diameter with inlet ring, 68mm (2-11/16") 

outside diameter without inlet ring. Accepts up 

to a 29mm diameter motor with a screw mount spacing of 16mm and a 

shaft size of 2.3mm. Weighs 1.4 oz. Impeller has 6 blades, when used 

with brushless motor MT2235 three blades should be removed making 

it a 3 bladed impeller. 


82 

Ducted Fans 

55mm Ducted fan for Speed 280/300 and 

Brushless motors 

VAS055 Vasa Ducted Fan without Nacelle 

for Speed 280/300 ...................... $89.99 

Powerful carbon fiber mini fan for small ducted 

fan projects. Length 71mm (2-13/16"), 

Outside Diameter at front lip 64mm (2-1/2"), 

Inlet Diameter 55mm (2 3/16"), Outside 

Diameter of case 56mm (2-3/16"), Weight 

without motor 23 grams, comes complete with motor adapters for 2mm 

and 2.3mm shafts. Two M3 motor mount screws included. 

65mm Ducted Fan for Brushless Power 

It is possible to use this ducted fan in models 

which weigh up to 3 times more than the thrust 

(30 oz. airplane), however, the optimal ratio 

between thrust and total airplane weight is 1:2. 

This would be an airplane that weighed 20 oz.. 

Duct and fan blades are made of rigid woven 

carbon fiber. Motor housing and stators are 

made of one continuous piece of woven carbon 

fiber for added strength. 

VAS400 Ducted Fan for 400/480 Motors .......................... $89.99 

Length is 75mm (2.95”), Outside diameter is 66mm (2.60”), Inside 

diameter is 65mm (2.56”). Weight without motor is 35 grams. 

VAS400G Ducted Fan for 

400/480 Motors with Nacelle ................................................ $119.99 

64mm fan unit with 2.3 and 3mm collet adapter 

FWF90210 64mm Ducted Fan Set 

........................................................... $11.99 

64mm interior diameter, 66mm exterior diameter, 

42mm long. 24mm diameter motor 

mount with internal steps for 20mm motor. 

Remove these steps for use with up to 

24mm dia. motor. Motor mount pattern is 4 

holes on 16mm centers. This is the replacement 

fan for our Su-34 and F-15 jets. 

Accepts the FWF90137 brushless Outrunner motor (sold separately). 

Includes collets for 2.3mm and 3mm shaft motors. Includes 4-2.5mm 

motor mount screws. 

NEW! 64mm Ducted Fan, 3500kv Outrunner Motor 

and 45A ESC 

FW3070 Complete Brushless Power System for Jets ......... $99.99 

Complete power solution for your 64mm 

jets. Includes a 64mm ducted fan, 

3500Kv Outrunner Brushless Motor and 

a 45A Brushless ESC with BEC, suitable 

for use with up to 4 lithium cells. 

Really bring out the performance of your 

jet. This power set produces about 490 

watts of power and has a thrust that 

exceeds 2.2 pounds. All this with an 

amp draw of approximately 33A. Motor 

comes pre-installed in the 64mm fan and pre-connected with 3.5mm 

connectors. The 45A ESC comes pre-connected with the matching 

3.5mm female connectors and the power wires are pre-connected with 

a genuine Deans Ultra male connector. ESC includes a BEC circuit 

5V/3A and weighs 63g (2.2 oz.). 

NEW! Add thrust vectoring to your jet 

FWF900111 180 Degree Vectored Thrust 

Nozzle Set ....................................... $12.99 

Single axis thrust vector unit with a total range 

of motion of about 40 degrees. Unit is made 

of injection molded plastic and is a ball and 

socket design with a molded foam exhaust 

nozzle trim ring. Inlet diameter is 62mm ID 

and outlet diameter is 60mm ID. The unit's 

diameter at the largest point is 82mm and the 

overall length is 84mm. Comes pre-assembled with a nylon control 

horn in place. Requires a micro servo to operate thrust vectoring (not 

included). Total range of motion requires approximately 28mm of 

pushrod travel. 


Pre-wired components, Save 

soldering time and guesswork 

The battery packs, 

Jeti Motor 

Controller, charging 

wires, and motor 

hookup wires 

shown here all have 

Deans Ultra, Speed 400 or JST Connectors soldered in place on them. 

This saves you soldering time and also helps you to make correct connections 

when you’re hooking up or charging your system. 

PC001C Charger Wire with 

Speed 400 Connector and Banana Plugs ............................... $6.49 

BAT220 Charger Adapter, JST to Deans Ultra ........................ $4.99 

BAT221 Charger Adapter, JST to Speed 400 .......................... $6.49 

Useful for chargers that have JST connectors on the output. 

BAT225 Speed 400 Connector Lead .................................... $5.99 

A red and a black wire with Speed 400 connector in place. Can be 

used as a charging lead to battery packs for Speed 400 motor use. 

BAT226 13” Speed 400 Connector Lead ............................. $6.99 

13” yellow motor wires with Speed 400 connector soldered in place. 

Solder the wire ends to your motor. Use as motor leads to your speed 

control. 

BAT228 Connector Lead for 

Battery Packs with JST connectors ....................................... $2.99 

7” length. A red and black wire with JST mini connector which mates 

to battery packs with this type connector which is often used in micro 

electric helicopters. Use this as a charging lead or to connect a battery 

pack or motor to a speed controller. 

To 10 Amps: 

Excellent for electric 

Slowflyers 

DEA002 Deans 2 Pin 

Connectors, pair ............... $2.39 

DEA002P Deans 2 Pin Polarized Connectors, pair ............... $2.39 

DEA003 Deans 3 Pin Connectors, pair ............................... $2.39 

Tiny, light, reliable. Tighten the female connectors occasionally by 

inserting a pin in the outside of their sockets to force the two jaws 

together. 

Plug&Fly Connectors for Speed 400 

GR2978 MG-6 Male Connector ...... $2.89 

GR2979 MG-6 Female Connector .. $2.89 

The connectors used on 

battery and charger for 

micro helicopters 

BAT229 JST Connector and Wires, 

Battery Lead ................................................................................ $2.99 

7” length. This is normally used on slow flyer and micro electric aircraft 

battery packs and speed controllers for motor connection. Male 

plastic connector which mates to wire harness (pigtail) BAT228. 

BAT228 JST Connector and Wires, Charger Lead …................ $2.99 

7” length. This is normally used as a charging lead and on speed controllers 

and motors. Female plastic connector which mates to BAT229. 

To 20 Amps: 

Tiny Polarized connectors for Speed 400 use 

HLFK4003 Polarized Speed 400 Connectors, 

3 sets, red ................................................ $7.99 

1 Polarized Connector set consists of: 1 Red 

plastic holder with a single male and single 

female connector. Example: To connect a nicad 

pack to a battery charger you need 2 Polarized 

Connectors. Gold plated connectors. Tiny: the male connector is .86” 

long. The red plastic polarized holder is .98” long. One Polarized 

Connector set weighs 1.81 grams. 

HLFK4004 Polarized Speed 400 Connectors, 3 sets, Yellow ... $7.99 

Same as HLFK4003 but have yellow plastic polarized holders. 

HLFK4013 Polarized Speed 400 Connectors, 1 set, Red ........ $2.99 

HLFK4014 Polarized Speed 400 Connectors, 1 set, Yellow .... $2.99 


Battery Accessories 

HLA99010 60/40 

Rosin Core 

Solder ...... $2.79 

Solder for electric hook-up 

Electric Flight Accessories 

Prop Adapters for Electric Flight Motors 

Collet type Prop shaft adapters hold tighter 

For interconnecting nicad cells when you anticipate 

current flows above 35 Amps 

HLA99012 Copper Braid Nicad 

Interconnector ................ $6.99 

3/16” wide, 5 feet on the spool. 

Solder directly to nicad cells, or 

to their welded-on tabs for best, 

and lowest electrical resistance 

interconnecting. Make sure that 

you flow solder from this braid directly to the + or - end of the cells 

so that this braid electrically parallels the spot welded connections. 

Heat shrink tubing to cover battery packs 

High temperature resistant heat 

shrink tubing for covering 

NiCad packs. 5 foot lengths. 

1-3/4” size fits most small 

packs through 600 mAh 

NiCads. 2-1/2” size fits most 

flat sub-C packs from 600mAh 

to 2000 mAh. The Larger sizes fit larger cells and “folded” packs. 

BAT250 2-1/2” Heat Shrink, White, 5’ ....................................... $4.59 

BAT251 1-3/4” Heat Shrink, Yellow, 5’ ..................................... $3.89 

BAT252 3” Heat Shrink, Red, 5’ ............................................... $4.89 

BAT253 3-5/16” Heat Shrink, Red, 5’ ....................................... $4.99 

Pinion puller Speed 400 to Speed 600 size 

motors 

HLAN2938 Puller Pinion Gears ....... $34.99 

Tool has 3 set screws: one blunt end and two 

with 2mm and 3mm shafts for pushing out the 

motor shafts from pinion gears. Works on all 

2.3mm motor shafts (Speed 400’s) and all 

3.2mm motor shafts (Speed 500, 600). 

Stator rings increase motor running time. 

Small Stator Rings and 

Mounts fit Speed 400, 

Mabuchi 380S and 

motors of 1-3/32” diameter 

(28mm). Larger ones fit 

Speed 500/600, Mabuchi 

540/550 and motors of 1- 

3/8” diameter (35.5mm). 

Stator Rings lower RPM, current flow to increase duration. 

GR1794/1 Stator Ring for SPEED 400 Motors ........................... $5.69 

GR1794/2 Motor Mount Set, SPEED 400 Motors ........................ $6.59 

GR1156 Stator Ring for SPEED 500-600 Motors ........................ $4.09 

GR1153 Motor Mount Set, SPEED 500-600 Motors .................... $7.49 

Collet type prop shaft adapters center themselves on a motor or gearbox 

prop shaft and hold securely as the collet squeezes the shaft. 

MJ4700 Collet Prop Adapter for 2mm Shaft, M5 ................... $4.49 

MJ4701 Collet Prop Adapter for 2.3mm Shaft, M5 ................ $4.49 

MJ4702 Collet Prop Adapter for 3.2mm Shaft, M5 ................ $4.49 





Graupner Prop Adapters to fit regular non-folding 

props to any motor shafts. 

GR605320 Prop Shaft Adapter for 2.0mm Motor Shaft ....... $4.89 

Has 4.9mm prop shaft. 

GR605323 Prop Shaft Adapter for 2.3mm Motor Shaft ....... $5.39 


GR605331 Prop Shaft Adptr. for 3.2mm Motor Shaft .......... $5.69 


GR605339 Prop Shaft Adptr. for 4mm Motor Shaft ........... $8.79 


GR605340 Prop Shaft Adapter for 4.0mm Motor Shaft ..... $11.49 


GR605350 Prop Shaft Adapter for 5.0mm Motor Shat ...... $12.79 


GR605360 Prop Shaft Adapter for 6.0mm Motor Shaft ..... $14.89 


Shafts, Couplers and Self-aligning 

Bearings 

GR3346 3.2mm—3.2mm Shaft Coupler ...... $6.99 

GR3373 5mm—5mm Shaft Coupler ............ $4.99 

GR3374 5mm—4mm Shaft Coupler ............ $4.99 

Prop Adapters for installation of regular 

aircraft props on Electric Motors 

Lightweight Collet prop adapters, good for light 

indoor airplanes 

Ultralight Collet Prop Shaft 

Adapters are 22mm long, 

4.9mm prop shaft, 4.5g weight. 

MJ4696 MPJet “Ultralight” 

Collet Prop Adapter for 2mm 

Shaft, M5 ...................... $3.99 

MJ4697 MPJet “Ultralight” 

Collet Prop Adapter for 2.3mm Shaft, M5 ............................... $3.99 

MJ4698 MPJet “Ultralight” Collet Prop Adapter for 

3mm Shaft, M5 ........................................................................... $3.99 

MJ4699 MPJet “Ultralight” Collet Prop Adapter for 

3.2mm Shaft, M5 ........................................................................ $3.99 

GR1269, 1270 

GR1171 

GR1269 Prop Shaft Adapter for 1/8” motor shaft 

(has 6mm and 10mm prop shaft) ............................................ $6.59 

GR1270 Prop Shaft Adapter for 4mm motor shaft 

(has 6mm prop shaft) ................................................................ $6.59 

GR1171 Prop Shaft Adapter for 5mm motor shaft 

(has 8mm prop shaft) .............................................................. $13.99 

GR288/4 Collet for 4mm shaft with 6mm prop shaft for 

7x3 to 9x5 folding props for 3.2mm shaft ................................ $5.99 

GR288/4N Nut ............................................................................. $0.79 



Prop adapters and prop nut 

Short prop adapter Long prop adapter Round Head Nut 

MJ8030 Short prop adapter for APC prop ............................. $3.99 

MJ8031 Long prop adapter for Flying Styro props .............. $3.99 

MJ8032 Small M5 Rounded prop nut ..................................... $3.99 

The prop adapters are collet type for perfect centering on 3mm shaft. 

They include a prop nut but the rounded prop nut is offered for scale 

and safety reasons. 

Propshaft adapters and spinners for regular 

non-folding airplane props 

All have 6mm 

propeller shafts 

(a standard size for 

non-folding airplane 

props) and mount to 

an electric motor shaft with 2 grub screws. The long adapters have a tapped 

hole and screw for mounting a spinner. The adapters for 4 and 5mm motor 

shafts have a two-stepped prop shaft: 6 and 8mm. The two spinners are 

made specially for the long propshaft adapters. 

HLAN2407 Propshaft Adapter for 2.3mm Shaft ......................................... $8.69 

HLAN2403 Propshaft Adapter for 3.2 mm Shaft ........................................ $8.69 

HLAN2413 Propshaft Adapter, long, for 3.2 mm Shaft ............................ $8.69 

HLAN2414 Propshaft Adapter, long, for 4.0 mm Shaft ........................... $8.69 

HLAN2415 Propshaft Adapter, long, for 5.0 mm Shaft ........................... $8.69 

HLAN5237 1.46” Spinner for long Adapter ................................................. $6.69 

HLAN5240 1.58” Spinner for long Adapter ................................................ $6.89 

Props for small motors 

GP04720 4-3/4 x 2 Prop .................. $3.49 

Hole is 5mm. Use adapter GR605320. 

HLFK5555 4.9 x 4.3 Prop/Spinner .. $3.39 

Can be used on Speed 400 motors - press it 

onto shaft - and on 280- motors which have a 

smaller shaft. Use CA to secure. 

HLAN4910 6” Prop/Spinner for Long Can Motors ................... $3.69 

For use on FK5202 "Long Can" 400 motors and other similar motorspress 

it onto shaft. 

GR6070P 6-1/2x4 Scale Prop for Speed 400 ............................ $4.99 

Scale looking prop for Speed 400. Fits prop shaft adapter GR605323. 

Prop for GWS gearboxes 

FS305 3 Bladed Prop for GWS Drive 

..........…....................................... $3.99 

9x7 three bladed prop with a 1” dia. hub 

drilled for the GWS geardrives. Very flexible blades are tough to damage. 

2, 3, and 4 bladed semi-scale props 

FS001 Single Prop Blade, 9x7............ $0.99 

FS101 Midpart, 2 blade, 6mm hole .... $0.99 

FS103 Midpart, 3 blade, 6mm hole ... $0.99 

FS104 Midpart, 4 blade, 6mm hole ... $0.99 

FS200 2 Blade Prop 9x7, Complete ....... $2.99 



The midparts press onto the output shaft of JH 

gearboxes. 

Slowflyer Props 

Special thin, light, and 

wide blade shapes that 

work well on slowflyers. 

Prop shaft hole: 4.72mm 

(0.186”), hub thickness 

is slightly less than 8mm 

(0.315”). Ream the shaft hole for larger diameter shafts. 

P07040SF 7x4 ................... $2.00 

P07050SF 7x5 ..................... $2.00 

P07060SF 7x6 ..................... $2.00 

P08038 8x3.8 ...................... $2.20 

P08060SF 8x6 ..................…$2.20 

P09038 9x3.8 ...................... $2.40 

P09047 9x4.7...................… $2.40 

P09060SF 9x6 .................… $2.40 

P09075SF 9x7.5 ................ $2.40 

P10038 10x3.8 .................... $2.70 

Special Thin props 

for Electric flight 

P10047 10x4.7 ................. $2.70 

P10070SF 10x7 ............… $2.70 

P11038 11x3.8 .................. $2.90 

P11047 11x4.7.................. $2.90 

P11070SF 11x7.............… $2.90 

P12038 12x3.8 ................. $3.70 

P12060SF 12x6 ................ $3.70 

P12080SF 12x8 ................ $3.70 

P13047SF 13x4.7 ............. $4.60 

P14047SF 14x4.7 ............. $4.60 

Designed specifically for electric 

flight. These are lightweight, 

thin but quite stiff. 

These are different from the 

Slowflyer props (Hobby Lobby 

numbers P07040SF, etc.) and are intended for stronger motors than 

the slow and parkflyers use. 

PE04141E 4.1x4.1E ...... $2.00 

PE04541E 4.5x4.1 ........ $2.00 

PE04742E 4.7x4.2 ....... $2.00 

PE04745E 4.75x4.5E ... $2.00 

PE04747E 4.75x4.75 .... $2.00 

PE05050E 5x5 .............. $2.00 

PE05145E 5.1x4.5E ..... $2.00 

PE05257E 5.25x4.75 .... $2.00 

PE05545E 5.5x4.5 ........ $2.00 

PE06040E 6x4E ............ $2.00 

PE06055E 6x5.5E ......... $2.00 

PE07050E 7x5E ........... $2.00 

PE08040E 8x4E ........... $2.20 

PE08060E 8x6E ........... $2.20 

PE08080E 8x8E .......… $2.20 

PE09045E 9x4.5E ........ $2.40 

PE09060E 9x6E ........... $2.40 

PE09075E 9x7.5E ........ $2.40 

PE09090E 9x9E ........… $2.40 

PE10050E 10x5E ......... $2.70 

PE10070E 10x7E ......... $2.70 

PE10010E 10x10E ....… $2.70 

PE11055E 11x5.5E ...... $2.90 

PE11070E 11x7E ......... $2.90 

PE11085E 11x8.5E ...... $2.90 

PE11010E 11x10E ....... $2.90 

PE12060E 12x6E ......… $3.70 

PE12080E 12x8E ......… $3.70 

PE12010E 12x10E ....… $3.70 

PE12012E 12x12E ....… $3.70 

Large thin electric props 

with more blade area 

19" Wide blade on left, 19" normal 

blade on right 

PE13065E 13x6.5E ..… $4.60 

PE13080E 13x8E .....… $4.60 

PE13010E 13x10E ...… $4.60 

PE14070E 14x7E .....… $4.60 

PE14010E 14x10E ....… $4.60 

PE14012E 14x12E ....… $4.60 

PE15080E 15x8E ......… $5.70 

PE15010E 15x10E ....… $5.70 

PE16080E 16 x 8E........ $6.90 

PE16010E 16x10E ....… $6.90 

PE16012E 16 x 12E ..... $6.90 

PE17080E 17 x 8E ....... $8.60 

PE17010E 17x10E ....… $8.60 

PE17012E 17 x 12E ..... $8.60 

PE18080E 18 x 8E ..... $10.60 

PE18010E 18x10E ..… $10.60 

PE18012E 18 x 12E ... $10.60 

PE19080E 19 x 8E ..... $12.30 

PE19010E 19 x 10E ... $12.30 

PE19012E 19 x 12E ... $12.30 

PE20080E 20 x 8E ..... $13.90 

PE20010E 20 x 10E ... $13.90 

PE20011E 20 x 11E … $13.90 

PE20013E 20 x 13E ... $13.90 

PE20015E 20 x 15E ... $13.90 

PE21014E 21 x 14E ... $13.90 

PE22010E 22 x 10E ... $18.40 

PE22012E 22 x 12E ... $18.40 

PE24012E 24 x 12E ... $22.90 

PE26015E 26 x 15E ... $32.20 

PE27013E 27 x 13E ... $36.80 

PE1912W 19x12 APC 

Wide Electric Prop ................. $12.30 

PE2012W 20x12 APC 

Wide Electric Prop ................. $13.90 

PE2112W 21x12 APC 

Wide Electric Prop ................................................................... $13.90 

Will load the motor and draw more amps than an APC thin electric prop 

of the same diameter and pitch. Use with heavier models or when your 

thin electric prop is not producing enough watts and increasing the 

prop diameter is not possible. Check your amp load with a watt meter 

to prevent overloading your system. 

84 


“SLIM” and “CAM SLIM” Electric 

Props for Geared 400’s 

Designed for slow flying electric models 

using geared SPEED 280 or 400’s or 

using direct drive SPEED 500 and 600 

motors. The SLIM line is made of glass 

filled nylon and the CAM SLIM line is made of carbon fiber reinforced 

plastic. The CAM SLIM props have “tiplets” at each tip. To mount SLIM 

props, use Precision Spinners GR1384/3 or GR1304/47. Mount CAM 

SLIM props with prop shaft adapters from the GR6053— series. With 

precision spinner GR6035/2 the 5x4 prop is a perfect fit for the front of 

direct drive Speed 300 motors. 

GPS03030 3x3 CAM SLIM Prop, 4mm Bore .............................. $3.99 

GPS05040 5x4 CAM SLIM Prop, 4mm Bore .............................. $5.29 

GPS06030 6x3 CAM SLIM Prop, 4.8/8mm Bore ........................ $5.29 

GPS06063 6x6.3 CAM SLIM Prop, 4.8/8mm Bore ..................... $5.29 

GPS08040 8x4 SLIM Electric Prop, 8mm Bore ......................... $5.69 

GPS08060 8x6 CAM SLIM Electric Prop, 4.8mm Bore ............. $5.99 

GPS09050 9x5 SLIM Electric Prop, 8mm Bore ......................... $6.69 

GPS09060 9x6 CAM SLIM Electric Prop, 4.8mm Bore ............. $6.99 

GPS10060 10x6 CAM SLIM Electric Prop, 8mm Bore .............. $8.99 

GPS10080 10x8 CAM SLIM Electric Prop, 8mm Bore .............. $8.99 

CAM Props for Electric airplanes 

Made of carbon fiber reinforced 

plastic. CAM props have “tiplets” 

at each tip and all have an 8mm 

hole. The smaller props work 

with Precision Spinners GR1304/3, GR1304/4 and GR1304/5. The larger 

sizes work with spinners GR1384/3, GR1304/47 and GR1313/5. 

GPP07060 7x6 CAM Prop, 8mm Bore ........................................ $5.99 



GPP10060 10x6 CAM Prop, 8mm Bore ...................................... $7.39 





GPP12560 12.5x6 CAM Prop, 8mm Bore ................................. $10.89 

Low pitch CAM Props for Electric airplanes 

GPP07040 7x4 CAM Prop, 8 mm Bore ....................................... $5.99 

GPP08040 8x4 CAM Prop, 8 mm Bore ....................................... $5.99 

GPP09040 9x4 Cam Prop, 8 mm Bore ....................................... $6.89 

GPP10040 10x4 CAM Prop, 8 mm Bore ..................................... $7.39 



GPP12540 12.5x4 CAM Prop, 8 mm Bore ................................ $10.89 

GPP14060 14x6 CAM Prop, 8 mm Bore ................................... $14.89 

GPP14540 14.5x4 CAM Prop, 8 mm Bore ................................ $15.89 

High performance fiberglass 

reinforced props for 

Slowflyers and 3D 

Wide blade props, stiff enough to retain 

their pitch under load, yet robust enough 

to resist breakage from the occasional prop strike. Lightweight with 

accurate blade airfoils provides quick throttle response and high efficiency. 

Will fit from 6mm to 8mm prop shaft. 

GPSP1810 Graupner 7x4 Slowflyer Prop ............................... $4.49 

GPSP2011 Graupner 8x4.5 Slowflyer Prop ............................ $4.49 

GPSP2312 Graupner 9x5 Slowflyer Prop ............................... $4.49 

GPSP2512 Graupner 10x5 Slowflyer Prop ............................. $4.49 

GPSP2812 Graupner 11x5 Slowflyer Prop ............................. $4.49 


SPEED Props for fast Electric airplanes 

The SPEED Prop 

series is for fast flying 

electric models 

using SPEED 400, 

480, 500 and 600 

motors. Made of 

glass filled nylon. The 4.8/6mm hole sizes are for use with the 

Graupner Precision Spinners GR1298/2 and GR1298/3. The 8mm hole 

sizes are for spinner nos. GR1304/3, GR1304/4 and GR1304/5. 

GPH06055 6x5.5 SPEED Prop, 8mm Bore ............................... $4.49 

GPH06565 6.5x6.5 SPEED Prop, 8mm Bore ............................ $4.49 

The CAM 

(“Computer -Aided 

-Manufacturing”) 

Speed Prop series 

is for pylon race 

models and other 

high speed race airplanes. CAM Speed props have “tiplets” at each tip 

and an extremely thin blade thickness for maximum RPM. Made of carbon 

fiber reinforced plastic. For SPEED 400, 480, 500 and 600 motors. 

The 4.8/6mm hole sizes are for use with the Graupner Precision 

Spinners GR1298/2 and GR1298/3. The 8mm hole sizes are for spinner 

nos. GR1304/3, GR1304/4 and GR1304/5. 

GPF04030 4x3 CAM Speed Prop, 4mm Bore ............................ $5.19 

GPF04740 4.7x4 CAM SPEED Prop, 4.8mm Bore ....................... $5.49 

GPF04747 4.7x4.7 CAM Speed Prop, 4.8/6mm Bore ................ $5.49 



GPF05505 5.5x5.5 CAM Speed Prop, 8mm Bore ...................... $5.89 

GPF06060 6x6 CAM Speed Prop, 8mm Bore ............................ $6.49 

Increase your electric airplane’s performance: 

Elliptical blades are 

wide and thin: 

designed ONLY for 

electric flight. Two 

styles: white nylon 

with fiberglass reinforcement 

and 

stronger black nylon 

with carbon reinforcement. 6x5 and 6.5x4 are for SPEED 400 direct drive. 

7x7, 8x5 are for SPEED 400 with gearboxes and 7 to 8 cells and for direct drive 

on SPEED 500 and 600. 8.5x6 through 9.5x7 work well on SPEED 600 with 

gearboxes. and 10 to 12 cells. Carbon fiber types can accept about 500 greater 

rpm than the fiberglass props. 

White/fiberglass 

HLAN2811 6.0x5.0 ... $5.69 

HLAN2814 6.5x4.0 ... $6.09 

HLAN2821 7.0x7.0 ... $6.09 

HLAN2824 8.5x5.0 ... $6.39 

HLAN2828 8.5x6.0 ... $6.69 

HLAN2831 8.5x7.0 ... $6.69 

HLAN2842 9.5x6.0 ... $6.69 

HLAN2842 9.5x7.0 ... $6.69 

HLAN2848 10.0x6.0 ..$7.39 

HLAN2850 10.0x7.0 ..$7.39 

HLAN2852 10.0x8.0 ..$7.39 

HLAN2854 10.5x6 .... $7.79 

HLAN2856 10.5x7 .... $7.79 

HLAN2858 10.5x8 .... $7.79 

Black/Carbonfiber 

HLAN2911 6.0x5.0 ..... $7.79 

HLAN2914 6.5x4.0 ..... $7.79 

HLAN2921 7.0x7.0 ..... $8.39 

HLAN2924 8.5x5.0 ......$8.69 

HLAN2928 8.5x6.0 ..... $9.19 

HLAN2931 8.5x7.0 ..... $9.19 

HLAN2942 9.5x6.0 ..... $9.19 

HLAN2945 9.5x7.0 ......$9.39 

HLAN2948 10.0x6.0 ....$9.39 

HLAN2950 10.0x7.0 ... $9.39 

HLAN2952 10.0x8.0 ... $9.39 

HLAN2954 10.5x6 ...... $9.69 

HLAN2956 10.5x7 ...... $9.69 

HLAN2958 10.5x8 ...... $9.69 

Left hand folding pusher prop with spinner 

GPC05504 Graupner 

5.5x4 CAM Folding 

Pusher Prop, 26mm 

Spinner ................ $16.99 

Special left hand pusher 

blades, works with right 

hand rotation motors when 

the motor is mounted facing 

the rear of the airplane. Fits 

2.3mm motor shaft. 26mm 

pusher spinner allows prop 

blades to fully fold to the rear for lowest drag. 


86 

CAM Folding Props with Precision Spinner 

The CAM Folding Prop series 

with Precision Spinner is for larger 

electric motors both geared 

and direct drive. Made of carbon 

fiber reinforced plastic. CAM props have an upturned “tiplet” at each tip 

and come complete with a Graupner Precision Spinner. The spinners 

have a machined aluminum backplate, a tapered steel quadruple-slotted 

collet, a glass-filled nylon spinner cone, and run absolutely true at 

high RPM. GPC13070 was made specifically for the F5B/10 Cell competition 

class. 

GPC08060 8x6 CAM Folding Prop, 5mm, 42mm Spinner ...... $39.89 

GPC09060 9x6 CAM Folding Prop, 5mm, 42mm Spinner ...... $41.99 

GPC10060 10x6 CAM Folding Prop, 5mm, 42mm Spinner .... $41.99 




GPC14095 14x9.5 CAM Folding Prop, 5mm, 42mm Spinner ... $42.99 


GPC18010 18x10 CAM Folding Prop, 6mm, 42mm Spinner ..... $49.59 

Spare Blades 

GPC0806B Spare Blades for 8x6 CAM Folding Prop, 8mm Yoke .......... $9.59 

GPC0906B Spare Blades for 9x6 CAM Folding Prop, 8mm Yoke .......... $9.59 

GPC1006B Spare Blades for 10x6 CAM Folding Prop, 8mm Yoke ........ $9.99 

GPC1106B Spare Blades for 11x6 CAM Folding Prop, 8mm Yoke ......... $9.99 

GPC1206B Spare Blades for 12x6 CAM Folding Prop, 8mm Yoke ........ $9.99 

GPC1307B Spare Blades for 13x7 CAM Folding Prop, 8mm Yoke ...... $10.99 

GPC1409B Spare Blades for 14x9.5 CAM Folding Prop, 8mm Yoke ... $11.59 

GPC1601B Spare Blades for 16x10 CAM Folding Prop, 8mm Yoke .... $17.99 

GPC1801B Spare Blades for 18x10 CAM Folding Prop, 8mm Yoke .... $21.59 

Get higher performance from your SPEED 280, 400, 

480, 500, 600 or 700 motors 

CAM Folding 

Props with 

ABS Spinner 

The CAM Folding Prop series is for electric airplanes using SPEED 

280, 400, 480, 500 and 600 motors, both geared and direct drive. 

Unusual blade shape, made of carbon fiber reinforced plastic, gives 

more power than conventional prop blades and is more efficient for 

longer flight times. CAM props have an upturned “tiplet” at each tip and 

come complete with spinner, prop shaft adapter, and all necessary 

hardware to mount them to your motor shaft. GPC06330 is a 6x3 with 

a wider spinner backplate which lengthens the prop to 6.3 inches. 

GPC04724 4.7x2.4 CAM Folding Prop, 2mm, 26mm spinner .. $17.59 

GPC0472L 4.7x2.4 CAM Folding Prop, 2mm, 26mm spinner, LEFT 

HAND PROP ............................................................................... $17.59 

GPC06030 6x3 CAM Folding Prop, 2.3mm, 30mm spinner ... $17.59 


GPC06330 6.3x3 CAM Folding Prop, 2.3mm, 38mm spinner .. $18.39 

GPC07540 7.5x4 CAM Folding Prop, 3.2mm, 38mm spinner .. $18.89 

GPC08045 8x4.5 CAM Folding Prop, 3.2mm, 38mm spinner .. $18.99 


GPC10080 10x8 CAM Gear Prop, 3.2mm, 38mm spinner ...... $19.99 

GPC11080 11x8 CAM Gear Prop, 3.2mm, 38mm spinner ...... $21.99 

Spare Blades 

GPC0472B Spare Blades for 4.7x2.4 CAM Folding prop, 4mm Yoke 

....................................................................................................... $7.89 

GPC0603B Spare Blades for 6x3 CAM Folding prop, 4mm Yoke 

....................................................................................................... $6.99 

GPC0754B Spare Blades for 7.5x4 CAM Folding prop, 6mm Yoke 

....................................................................................................... $7.89 

GPC0804B Spare Blades for 8x4.5 CAM Folding prop, 6mm Yoke 

....................................................................................................... $8.79 


....................................................................................................... $9.59 


....................................................................................................... $9.99 


....................................................................................................... $9.99 


Precision 

spinners for 3 bladed 

folding props 

HLAN5504 36mm 3-Blade 

Spinner, 4mm Shaft ....... $28.89 

HLAN5505 36mm 3-Blade 

Spinner, 5mm Shaft ....... $28.89 

HLAN5506 36mm 3-Blade Spinner, 6mm Shaft .................. $28.89 







Center hole is 8mm 

and fits standard 

Aero-naut prop shaft 

adapters. For blades 

with approx. an 8mm 

wide base and a 3mm 

hole for attachment. 

3 bladed hub fits all aero-naut 

"CAM" Carbon blades 

HLAN4232 3-Blade Middlepart Yoke, 42mm ......................... $27.99 

HLAN4233 3-Blade Middlepart Yoke, 47mm ......................... $28.59 

Precision Spinners with set screws – prop 

hub/spinner for high speed 

electric motors 

These are not only spinners but are also hubs that attach regular glow engine 

non-folding type airplane props to electric motor shafts. A set screw in the hub 

holds it to the motor shaft. The machined aluminum hubs and glass-filled 

nylon spinners run absolutely true at high RPM’s and eliminate that “buzz” that 

happens with out-of-round and out-of-balance spinners which cuts your motor 

speed. 

GR6033/22 20mm for 2mm shaft 

and 4mm prop hole ............... $8.99 


and 4mm prop hole .............. $12.99 

GR6033/23 28mm for 2.3mm Shaft, 

4.8mm Prop Hole ............. $38.99 

GR1298/2 30mm for 2.3mm 

shaft and 4.8mm prop hole 

........................................... $16.99 

GR1298/3 30mm for 3.2mm shaft and 4.8mm prop hole ... $18.99 

GR1298/4 30mm Precision Spinner for 4mm Shaft ........... $18.99 

GR1298/40 38mm for 4mm shaft, 4.8mm prop hole .......... $23.99 

GR1304/3 38mm for 3.2mm shaft and 8mm prop hole ...... $23.99 

GR1384/3* 38mm 3.2mm shaft, 8mm prop hole ................. $23.99 

GR1304/4 38mm for 4mm shaft and 8mm prop hole ......... $23.99 

GR1304/47* 38mm 4mm shaft, 8mm prop hole .................. $23.99 



*GR1384/3 and GR1304/47 have larger prop blade openings to fit the 

Graupner SLIM Electric props GPS08040 and GPS09050. 

Precision Spinners with 

collets for HIGH RPM electric motors 

These have a machined aluminum 

backplate, a tapered steel quadruple-slotted 

collet, and a glass-filled 

nylon spinner. Use the larger 45mm 

and 60mm sizes for the larger CAM 

non-folding props. 


and 8mm prop hole … $17.99 

GR1385/42 42mm for 5mm shaft and 8mm prop hole …....... $22.99 



GR6044/60 60mm for 6mm shaft and 8mm prop hole ............. $34.99 


AeroNaut Folding Props 

for Electric Flight 

These props were designed by Rudi Freudenthaler. The blade shapes 

are efficient. They fold promptly. The Middleparts are small and do not 

produce wind resistance. 

Design your folding prop for electric flight using components: 

A. Select the Blade size. 

B. Select the Middlepart Yoke to be long enough so that the prop will 

fold fully. 

C. Select the Spinner size that is recommended for the Middlepart. 

D. Select the Prop Shaft Adapter that will fit your motor shaft. Balance 

the prop. 

Spare blades, pair 

A. 

“CAM” Carbon Fiber 

Stock No.: Size: Price: 

HLAN3416 8x5 $12.70 

HLAN3417 8x6 $12.70 

HLAN3419 9x5 $13.10 

HLAN3423 9x7 $13.10 

HLAN3426 9.5x5 $13.40 

HLAN3428 10x6 $13.40 

HLAN3431 10x7 $13.40 

HLAN3432 10x8 $13.40 

HLAN3439 11x6 $13.70 

HLAN3441 11x7 $13.70 

HLAN3442 11x8 $13.70 

HLAN3443 11x10 $13.70 

HLAN3446 12x6.5 $13.90 

HLAN3450 12x8 $13.90 

HLAN3451 12x9 $13.90 

HLAN3449 12x10 $13.90 

HLAN3453 12.5x7.5 $13.90 

HLAN3455 12.5x9 $13.90 

HLAN3458 13x6.5 $14.30 

HLAN3457 13x8 $14.30 

HLAN3459 13x11 $14.30 

HLAN3461 13x10 $14.30 

HLAN3468 14x8 $15.80 

HLAN3467 14x9 $15.80 

HLAN3469 14x10 $15.80 

HLAN3466 14x12 $15.80 

HLAN3471 15x8 $17.50 

HLAN3472 15x10 $17.50 

HLAN3473 15x13 $17.50 

HLAN3474 16x8 $18.40 

HLAN3475 16x10 $18.40 

B. 

"Middlepart" (aluminum yoke with screws) 

(dimension given is center to center of blade screws) 

HLAN4222 Middlepart Yoke 42mm (for 40mm Spinner) $12.70 



Reverse rotation 

prop blades! 

Sold in PAIRS 

Carbon: Size: Price 

HLAN2120 8-5 $15.90 

HLAN2125 9-1/2-5 $19.70 

HLAN2130 10-7 $20.10 



HLAN3476 16x13 $18.40 

HLAN3484 17x8 $18.40 

HLAN3487 17x9 $18.40 

HLAN3488 17x11 $18.40 

HLAN3490 17x13 $18.40 

HLAN3493 18x9 $19.90 

HLAN3494 18x11 $19.90 

HLAN3496 18x13 $19.90 

HLAN3497 18.5x12 $19.90 

“Classic” Carbon Fiber Blades 


HLAN3410 7x6 $11.40 

HLAN3422 9x6.5 $13.10 

HLAN3435 10.5x6 $13.40 

HLAN3440 11x6.5 $13.70 

HLAN3444 11.5x7 $13.70 

HLAN3448 12x7 $13.90 

HLAN3452 12.5x6.5 $13.90 

HLAN3454 12.5x10 $13.90 

HLAN3456 13x6.5 $13.90 

HLAN3460 13.5x7 $14.30 

HLAN3464 14x7 $15.40 

HLAN3470 15x9.5 $15.80 

HLAN3486 16.5x15 $18.40 

HLAN3492 18x8 $18.40 

Middlepart Yokes, 

Spinners, and Prop Shaft 

Adapter 

Note: AeroNaut propeller 

blades no longer are the 

white blades shown in the 

picture that shows the propeller 

parts, but are now 

“CAM” blades and “CAR- 

BON” blades as in the 

photo above. 

HLAN7205 Spare 

Screw for Prop 

blade, each $1.50 

HLRE420 M3 Nylon Stop Nuts for Blade Screw, 10 .............. $2.20 

Spinners, 

C. white nylon: D. Prop Shaft Adapter 

HLAN5140 Spinner 40mm Stock No.Size: ..................... Price: 

(1-9/16") ........................ $5.60 HLAN2407 2.3mm .................. $8.60 

HLAN5145 Spinner 45mm HLAN2408 3.2mm .................. $8.60 

(1-3/4") ......................... $5.90 HLAN2409 5.0mm .................. $8.60 

HLAN5150 Spinner 50mm HLAN2411 4.0mm .................. $8.60 

(2") ................................ $6.20 HLAN2412 6.0mm .................. $8.60 

HLAN241 1/4" ......................... $1.00 

(No Prop Shaft Adapter is needed for 5/16" shafts) 

Precision Spinners for CAM 

Folding Props 

The Precision Spinners from the CAM Folding prop line. These are 

spinner/prop shaft adapters in one unit. All have a machined aluminum 

backplate, a tapered steel quadruple-slotted collet, an aluminum blade 

holder with counter-sunk and threaded screw holes and a GRP (glassfiber 

reinforced plastic) spinner. 

GR6034/4 34mm for CAM Folding Prop, 4mm Shaft ........ $34.99 






GR6045/6 45mm Precision Spinner, 6mm Shaft ................ $34.99 

Lightweight small 

spinners 

1-3/16" (30mm) spinner that weighs less 

than 4 grams. Works well on 22 series 

AXI motors with radial mounts and other 

small motors. 

AMS306R 30mm Lightweight “Snap” Spinner, Red ............ $4.89 

AMS306W 30mm Lightweight “Snap” Spinner, White ........ $4.89 

AMS306B 30mm Lightweight “Snap” Spinner, Black .......... $4.89 

“Turbo” spinners have air intakes for motor cooling 

and include middleparts and prop shaft adapters 

These spinners have a hole in the front that 

lets air enter through the nose of the plane 

— a great way to cool the electric motor 

instead of using a fuselage air scoop. 

Included: turned aluminum spinner, middlepart 

yoke, screws for prop blades, and 

collet type motor shaft adapter. The width 

between the arms of the prop yoke is 8mm. 

AeroNaut folding propeller blades have 

8mm wide hubs. 

“TURBO” Aluminum Spinners 

Spinner Dia. for motor Use 

HL no.: (mm): shaft(mm): Blades* Price 

DKT3020 30 2.0 A $22.99 

DKT3023 30 2.3 A $22.99 

DKT3030 30 3.0 A $22.99 

DKT3031 30 3.2 A $22.99 

DKT3040 30 4.0 A $22.99 

DKT3050 30 5.0 A $22.99 

DKT3631 36 3.2 A $23.99 

DKT3640 36 4.0 A $23.99 

DKT3650 36 5.0 A $23.99 

DKT4031 40 3.2 A $24.99 

DKT4040 40 4.0 A $24.99 

DKT4050 40 5.0 A $24.99 

*A=”aero-Naut” CAM Carbon or classic Carbon folding prop blades. 

Precision turned aluminum spinner with blade holders 

and collet prop adapter included. 

Lightweight (10 gram) precision spinners turned 

from aluminum bar stock. Each includes: turned 

aluminum spinner, middle-part yoke, screws for 

prop blades and collet type motor shaft adapter. 

The width between the arms of the prop yoke is 

6mm and the prop pin diameter is 2mm. Fits 

Graupner CAM folding props with 6mm wide 

bases. 

DK3020 30mm Aluminum Spinner, 2.0mm ............................... $18.99 







88 

Graupner 

“Super Nylon” 

Props 

Modelers and magazine 

reviewers have acclaimed 

Graupner Propellers. No other 

model airplane propellers are 

molded as carefully and accurately. 

The blade shapes and 

airfoils are considered the 

most efficient ever made for 

model airplane use. Fiberglass 

reinforced for rigidity. 

Stock No. Size: Price: 

GP05020 5-2 ....... $3.49 

GP06030 6-3 ....... $3.69 

GP06040 6-4 ....... $3.69 

GP06050 6-5 ....... $3.69 

GP06060 6-6 ....... $3.69 

GP07030 7-3 ....... $4.29 

GP07040 7-4 ....... $4.29 

GP07050 7-5 ....... $4.29 

GP07060 7-6 ....... $4.29 

GP07070 7-7 ........ $4.29 

GP07550 7-1/2-5 .... $4.29 

GP08040 8-4 ....... $4.79 

GP08050 8-5 ....... $4.79 

GP08060 8-6 ....... $4.79 

GP08080 8-8 ....... $4.79 

GP09040 9-4 ....... $4.99 

GP09050 9-5 ....... $4.99 

GP09060 9-6 ....... $4.99 

GP09070 9-7 ....... $4.99 

GP09550 9-1/2-5 .... $4.99 

GP10030 10-3 ...... $5.39 

GP10040 10-4 ...... $5.39 

GP10050 10-5 ...... $5.39 

GP10055 10-5-1/2 ... $5.39 

GP07040C 7-4 ....... $4.99 

GP08060C 8-6 ....... $5.29 

GP09060C 8-6 ....... $5.79 

GP09070C 9-7 ....... $5.79 

GP308060 8-6 ....... $8.99 

GP309070 9-7 ....... $9.99 

GP310070 10-7 .... $10.29 

GP310083 10-8-1/3 . $10.99 

GP311070 11-7 .... $13.99 

GP312080 12-8 ..... $17.39 

GP312570 12-1/2-7.. $17.39 

GP314070 14-7 .... $18.99 

GP315080 15-8 .... $21.79 

GP316080 16-8 .... $23.69 

3 BLADE PROPS 

fg 

hi 

jkp 

kq 

kq 

xyr 

xyr 

ns 

nt 

uv 

Propeller size suggestions for Internal Combustion Engines: 

Refer to the small letters to the right of the prices. 

These are only a guide. 

Follow the engine manufacturer's recommendations. 

2-CYCLE ENGINES: 4-CYCLE ENGINES: TUNED PIPE/HOT: 

a .049-.051 h .35 

b .074 i .40 

c .09-.10 j .45-.50 

d .15 k .61-.65 

e .19-.20 l .61 (hot) 

f .25 m .80 

g .30 n 1.08 

2 BLADE PROPS 

a 

a 

a 

a 

b 

b 

c 

c 

c 

c 

c 

c 

d 

d 

de 

ef 

fg 

gh 

hi 

gh 

fg 

fg 

h 

hi 

2 BLADE PUSHER PROPS 

c 

de 

ghi 

ghi 

o 4 Cyc. .40 

p 4 Cyc. .45/.53 

q 4 Cyc. .60 

r 4 Cyc. .80-.90 

s 4 Cyc. 1.20 

t 4 Cyc. 1.60 

u 4 Cyc. 2.40 

v Quadra/Zen. 

Propshaft Adapters for Graupner Props 

GP0001 Propshaft Adapters-Small ......................................... $4.59 

Use with Graupner Props to make the prop fit exactly engine/motor 

thread sizes 1/4”, M6, 12-32, M5, 5-40, 6-32. 

GP0002 Propshaft Adapters-Large ......................................... $5.59 

Use with large Graupner Props to make the prop fit exactly engine/motor 

thread sizes 3/8” or 5/16”. Does not work with GP316080. 


Stock No. Size: Price: 

GP10060 10-6 ...... $5.39 

GP10065 10-6-1/2 .. $5.39 

GP10070 10-7 ...... $5.39 

GP10560 10-1/2-6.... $5.39 

GP11060 11-6....... $5.89 

GP11070 11-7....... $5.89 

GP11075 11-7-1/2.... $5.89 

GP11080 11-8....... $5.89 

GP11100 11-10...... $5.89 

GP11110 11-11...... $5.89 

GP12050 12-5....... $5.99 

GP12060 12-6....... $5.99 

GP12070 12-7....... $5.99 

GP12011 12-11...... $5.99 

GP12550 12-1/2-5 .. $6.89 

GP12560 12-1/2-6 .. $6.89 

GP13580 13-1/2-8 .. $8.89 

GP14070 14-7..... $11.29 

GP14011 14-11 .... $11.29 

GP15080 15-8 .... $12.29 

GP16080 16-8 .... $13.69 

GP10060C 10-6 ............. $5.99 

GP10560C 10-1/2-6 ....... $5.99 

GP11080C 11-8 ............. $6.39 

w .40-.45 

x .61 

y .61 Longstroke 

z 3500cc 

i 

i 

i 

j 

jo 

jko 

k 

k 

x 

x 

ko 

ko 

k 

x 

kmp 

kmp 

mr 

r 

st 

nrs 

ns 

i 

jop 

k 

Graupner G-Sonic props 

Computer designed props for larger 

electric and glow airplanes 

Graupner G-Sonic props are 

manufactured on ultra-modern 

CAD/CAM (Computer-Aided- 

Manufacturing) machines and 

provide true running and 

tracking to the highest degree. 

Specially calculated airfoil 

sections for each propeller 

guarantee the best possible 

aerodynamic efficiency. 

Increase the performance of 

your airplane while reducing the noise generated by the prop. Made 

from ultra-high tensile strength plastic for great torsional rigidity. All 

propellers in this series have an 8mm center bore. Suitable for use on 

glow or electric powered airplanes. Available in sizes ranging from 

11x6 to 22x12. 

GS11060 G-Sonic 2 Blade Prop, 11 x 6 .................................. $7.79 



GS11010 G-Sonic 2 Blade Prop, 11 x 10 ................................ $7.79 




GS12010 G-Sonic 2 Blade Prop, 12 x 10 .................................$8.19 




GS13080 G-Sonic 2 Blade Prop, 13 x 8 ................................. $12.49 

GS13010 G-Sonic 2 Blade Prop, 13 x 10 ............................... $12.49 




















NEW! Computer designed 3 Bladed G-Sonic props 

GS313010 G-Sonic 3 Blade Prop, 13X10 ................................ $25.99 





Three-blade version of the popular G-Sonic line of 

propellers. Produced from precision molds with 

efficient blade profiles, powerful and quiet. These are 

true running and accurate tracking props. Molded 

from tough plastic with the maximum tensile strength 

and torsional rigidity. Hub bored for 8mm shaft. 

NEW! Pro Series props - Stiffer, Stronger, Quiet 

GSP16010 G-Sonic Pro 2 Blade Prop 16x10 ......................... $22.89 





GSP22080 G-Sonic Pro 2 Blade Prop 22x8 ........................... $47.89 


This new range of propellers have blade shapes identical 

to the Graupner G-Sonic props, but molded in a tougher 

plastic material. This makes these props stiffer and with 

a higher tensile strength than the regular G-Sonic props. 

The efficiency is improved by added stiffness for better 

performance combined with lower noise. 



Adjustable Variable Pitch Prop for Scale Airplanes 

NEW! Great scale looks - variable pitch 

SMP39510 Scale 3 Blade Variable Pitch Prop, 9-1/2x10 ....... $13.99 

SMP31110 Scale 3 Blade Variable Pitch Prop, 11x10 ............ $15.99 

Ground adjustable variable pitch prop for scale airplanes. Choose the 

size, 9-1/2" or 10-7/8” diameter, that is appropriate for your airplane. 

Each prop has a range from 5" to 15" of pitch. In its stock form a pitch 

of 10" is automatically set without the need of a pitch gauge. To set 

other pitches each prop includes a wooden pitch gauge. A tab must be 

removed from the base of each blade to change the pitch to other than 

10". Each prop set includes the pre-painted set of blades, a set of 

decals for you to install, a scale chrome plated plastic hub and spinner, 

prop retention screws. All that is required is the purchase of a prop 

adapter for your chosen application. Adapters for 3, 3.2, 4, and 5mm are 

available separately. 

* NOTE - These props are for Electric 

Parkflyer Aircraft ONLY! They are NOT 

for use with glow engines or extremely 

powerful electric motors! 

NEW! Great scale looks - variable pitch 

SMP49510 Scale 4 Blade Variable Pitch Prop, 9-1/2x10 .. $16.99 

SMP41110 Scale 4 Blade Variable Pitch Prop, 11x10 ........ $19.99 

Ground adjustable variable pitch prop for scale airplanes. Choose the 

size, 9-1/2" or 10-7/8” diameter, that is appropriate for your airplane. 

Each prop has a range from 5" to 15" of pitch. In its stock form a pitch 

of 10" is automatically set without the need of a pitch gauge. To set 

other pitches each prop includes a wooden pitch gauge. A tab must be 

removed from the base of each blade to change the pitch to other than 

10". Each prop set includes the pre-painted set of blades, a set of 

decals for you to install, a scale chrome plated plastic hub and spinner, 

prop retention screws. All that is required is the purchase of a prop 

adapter for your chosen application. Adapters for 3, 3.2, 4, and 5mm 

are available separately. 

* NOTE - These props are for Electric Parkflyer Aircraft ONLY! They 

are NOT for use with glow engines or extremely powerful electric 

motors! 

SMPB395 3 Spare 9-1/2" diameter prop blades ......... $11.99 

SMPB495 4 Spare 9-1/2" diameter prop blades ................... $14.99 

SMPB411 4 Spare 10-7/8" diameter prop blades ................. $16.99 

Four pre-painted replacement blades and decal set for 9-1/2" or 10- 

7/8" diameter props. 

SMPB311 3 Spare 10-7/8" diameter prop blades ....... $12.99 

Three pre-painted replacement blades and decal set for 9-1/2" or 

10-7/8" diameter props. 

Variable Pitch Propeller 

NEW! Prop adapters for scale 3 

and 4 bladed props 

Aluminum prop adapter for motors Includes 

prop nut, set screws and screw for prop hub. 

SMPA30 Aluminum prop adapter for motors with 3mm shaft. 

....................................................................................................... $3.99 

SMPA32 Aluminum prop adapter for motors with 3.2mm shaft. 

....................................................................................................... $3.99 


....................................................................................................... $3.99 


....................................................................................................... $3.99 

We’re open 24/7 at 


Variable Pitch Prop for tiny AXI 

PME2204 Model Motors 

"Professional" VPP for AXI 

2204/54 .............................. $42.99 

Designed to work with Hollow Shaft 

AXI OUTRUNNER. Assembles in 

just minutes. Use with 3D airplanes 

up to 6-1/2 oz. For extreme flight 

not possible with normal propellers. 

Ballbearing mounted carbon rod attaches to additional servo to adjust 

the blade pitch in flight. Blades have symmetrical airfoil. 

Pre-assembled variable 

pitch prop 

for AXI motors 

PME240 Model Motors 

“Professional” Variable Propeller, 

9-1/2” dia. ........................ $42.99 

Pre-Assembled, only the blades need 

to be attached and the unit installed on 

a hollow shaft AXI motor. Total assembly 

time is only a couple of minutes. 

For insane 3D action with your lightweight 

foam aerobat. Ballbearing 

mounted carbon rod attaches to additional 

servo to control blade pitch. Blades have symmetrical airfoil and 

produce very strong brake/reverse action yet retains conventional prop 

performance when in positive pitch. 

PME240B Model Motors Spare Blades for EVP Unit .............. $7.99 


Adhesives 

GR959 Graupner "Uhu Por" Glue 

for Styrofoam .............. $7.89 

1.4 oz. tube (40 grams). Does not 

melt foam. Works primarily as a 

contact glue, apply thin layer to 

both mating surfaces, allow to set 

for 10 minutes, then press together. Make sure you are correctly 

aligned before touching pre-glued parts together, part will be difficult to 

re-position. Will glue anything to foam or foam to itself. Dries fast. 

Superior 

Super-Glue! 

ZAP009 Zap CA Thin 

Viscosity, 1/2 oz ............ $4.19 

Instant bonding. 

ZAP003 Zap A Gap CA+ Med. 

Viscosity, 1/2 oz. .......... $4.19 

30 second bonding, fills gaps. 

ZAP025 Zap-O Odorless, Foam Safe CA, 20 gr. .......... $9.99 

For gluing foam. Slow bonding. 

ZAP015 Zap Kicker, 2 oz. Spray .................................... $5.99 

Makes slower curing CA glues set instantly. 

ZAP016 Z-7 Debonder, 1 oz. .......................................... $4.09 

For releasing CA glue joints. 

ZAP018 Z-Ends and Teflon Tubing, 10 ......................... $3.79 

ZAP020 Zap "Slo-Zap" High Viscosity CA, 1 oz. .......... $7.59 

Thick, slow bonding CA glue, fills gaps. 

ZAP026 "Zap Gel" Adhesive/Sealer, .7 oz. .................... $7.99 

Thickest and strongest CA glue available. 

Devcon Epoxy Glues, 

Thread lock 

DEV205 5 Minute Epoxy, 1 oz. .................................................. $4.39 

DEV206 5 Minute Epoxy, 2.5 oz. ............................................... $7.59 

DEV209 5 Minute Epoxy, 9 oz. ................................................ $17.39 

DEV233 30 Minute Epoxy, 9 oz. .............................................. $16.09 

DEV235 30 Minute Epoxy, .8 oz. ............................................... $4.69 

DEV360 Thread Lock, .2 oz. ...................................................... $3.59 

A. “Airplane Glue” - it’s very fast setting and 

glues ABS plastic! 

GR9534 UHU-Hart, 1 oz. ............................................................ $4.89 

GR9535 UHU-Hart, 4 oz. ............................................................ $9.99 

Absolutely clear, ultra lightweight and strong when dried. This is the best 

selling model airplane cement in Germany. It dries so fast on balsa 

joints its almost like using CA. It is extremely strong and light. It slightly 

melts ABS plastic so it makes both a glue bond and a “weld” on ABS 

parts like boat hulls and airplane plastic fuselages. 

B. Stabilit Express-you’ll become addicted to it! 

GR9601 Pattex Stabilit Express, 1 oz. .................................... $14.99 

GR9602 Pattex Stabilit Express, 3 oz. .................................... $28.99 

As an adhesive Stabilit Express will firmly adhere anything to anything 

else. It is unsurpassed for joining such critical things as a nylon bellcrank 

to a fiberglass fuselage, or metal or plastic tubes to plastic or fiberglass. 

It is a two part methylacrylic adhesive. The material sets in only 

20 minutes into a wood-colored mass. The fully cured material can be 

sanded and finished. The cured material has both compression and tensile 

strength, so it can be used as a structural element in addition to simply 

bonding other structures. 

PFM glues anything to anything! 

HLIMP001 “P.F.M” Adhesive-Sealant, 3.7 oz. ........................ $13.99 

PFM is a one part, quick setting adhesive and sealant that glues just 

about anything to anything else. It will melt foam however. It sets in 

about 30 minutes. PFM sets but doesn't get brittle; it will give without 

letting go. PFM is non-flammable. 

PFM can repair electrical insulation, give strain relief to electric connectors, 

glue servos in place, glue servo trays and bulkheads in fiberglass 

fuselages. PFM is the indispensable glue in your workshop, 

thousands of uses and counting. 

Glue ABS to ABS or 

to wood 

KK80478 Krick 

Special Adhesive 

for ABS ................... $5.99 

Inexpensive main 

landing gears 

RA1093 13” Main Landing Gear ............................................... $9.99 

RA1094 16” Main Landing Gear ............................................... $9.99 

Small one is about 2” high, large one about 4”. Can be bent for more height 

and narrower tread. 

Strong lightweight retracts for airplanes 

up to 2 pounds 

ALF6001 Alfa Model Retractable 

Undercarriage Set ................... $26.99 

The most versatile and strongest landing 

gear set for light airplanes that we have 

ever seen. Injection molded reinforced 

plastic with 3mm carbon legs and 2mm 

steel hinge pins and axles, mounting 

screws are included. Base is approx. 

5/8" W x 1-7/16" L x 7/16" H. Gear length can 

be up to 5" from hinge pin to center of wheel. 

Can be assembled in a couple of minutes. 90 

degree or 85 degree operation to match wing 

dihedral. A pair of retracts can be operated by a 

single micro servo (HS-55) mounted in the fuselage. 

These either "retract inward" or "retract 

outward". In both cases the servo remains in 

the fuselage. A pair of retracts can be used in tandem for planes like 

the Alfa Beaufighter or Flying Styro Mosquito. Additional parts in the kit 

allow you to adjust the gear offset and even to add scale, springloaded 

movement. The sprung "knuckle style" axle assembly has nearly 

5/8" of movement and absorbs harsh landing loads. Clear instructions 

with exploded view drawings and dimensions. 

ALF60011 Alfa Model Retract 

Mechanism, pair ........................... $19.99 

Includes the mechanical parts, 3mm carbon 

gear legs, 2mm steel hinge pins and axles. 

Works as either a 90 or 85 degree retract. 

Does not include the parts for the spring 

loaded "knuckle style" axle assembly or the 

"break-away" function. 

ALF60012 Alfa Model Knuckle Axle 

Assembly .................................. $10.99 

Parts for spring loaded axle assembly. 

Can be adapted to the landing gear on 

any airplane up to 2 pounds. Fits a 3mm 

gear leg (not included). Reduces the 

shock transmitted into the airframe due to 

stiff landing gear. 

90 

Cyanoacrylate glue for foam models 

KF022 Foam Safe CA Glue, 1 oz. ........................... $10.99 

Low odor, fills gaps well, dries in about a minute. 

KF023 Accelerator, 2 oz. Pump Spray ..................... $5.99 

Foam friendly accelerator; use sparingly to set CA instantly. 

The name says it all! 

RA1072 Shock Absorbing Universal 

Steerable Nose Gear ................. $12.99 

5/32" (4mm) wire. 8-1/4" overall length. This is everything the name 

says it is: It absorbs up and down jolts with its tempered steel springs, 

it mounts in any .30 to .90 size airplane, it is steerable, and it comes 

assembled. Nose gear travels up and down on brass bushings. 


Install a tailwheel 

on your RC plane! 

RA1300 Complete Tailwheel Assembly ................................... $4.79 

Includes 1” diameter wheel. For almost any size RC airplane. The 

tempered wire is 1/16” which should give good support in models up to 

about 6 pounds. Instructions show how to install this on any airplane. 

Can be steerable, centering, or fixed. 

Ultra lightweight steerable tailwheels 

for small models 

LYT6001 3/4” Foam Tailwheel 

Assembly ...................................... $4.49 

1.4 grams 

LYT6002 5/8” Rubber Tailwheel Assembly ............................ $4.29 

1.8 grams 

LYT0011 5/8” Rubber Tailwheel Only ..................................... $2.09 

0.9 grams 

Lower prices! Our extra 

lightweight wheels 

The ultimate 

SuperLight BIG scale 

airwheels! 

Now up to 6” diameter 

Wheels 

These are our lightest wheels. Here 

are some weights for reference: 2” - 

.42 oz, 3” - .89 oz., 4” - 2.06 oz. 

each. Even though they are light 

these are very durable and will support 

heavy model airplanes. Made by Kavan in Germany. These have very 

scale-like tread designs. 

Kavan Extra Light Wheels, pairs: 

HLFK1602 2” pair ............... $7.69 

HLFK1612 2-1/4” pair ......... $7.89 

HLFK1622 2-1/2” pair ......... $7.99 

HLFK1632 2-3/4” pair ......... $8.39 

HLFK1642 3” pair ............... $9.29 

HLFK1652 3-1/2” pair ....... $10.99 

HLFK1662 4” pair ............. $11.69 

Have air valve so you can change 

pressure with an air pump. Chrome 

plated hubs are two piece so you 

can hide a wheel collar inside. These are VERY strong and will support heaviest 

airplanes. But they are very light -- from 1.8 oz to 3.5 oz. each. 6mm axle 

holes can be drilled to 1/4” or shimmed with 7/32” brass tubing (KSN130) to 

3/16” axle. 

HLFK1802 4” Smooth, Pr, ............................................................... $27.99 

HLFK1812 5” Smooth, Pr, ............................................................... $33.99 

HLFK2592 4” Treaded, Pr, ................................................................ $27.99 

HLFK2602 5” Treaded, Pr, ............................................................... $33.99 

HLFK266 6” Treaded, Pr, .................................................................. $39.99 

HLFK258 Internal collars and Wheel Hubs, pair ................... $10.99 

Lightweight plastic hubs with high quality chrome plating for scale 

appearance. The wheel collars are 6mm dia. and can be drilled to fit any 

larger axle. 

These are not just 

wheels — these are 

REALS! 

Reals have the most realistic 

tires you’ve ever seen in a 

model airplane wheel. The 

amount of “squash” is realistic. 

The “rubber” (it’s not, really, 

it’s a vinyl compound) has realistic traction — they’re not shiny and slippery 

plastic. The sizes through 3” are narrow and have lower air drag. They 

are light weight (for reference to others: 2” - .5 oz.; 3”- 1.25 oz., 4”- 2.5 oz. 

each). Here’s the kicker: They’re cheaper than other wheels! Compare the 

prices! 

Hobby Lobby “Reals”, pairs: 

HLH42150 1-1/2” pair ........ $3.49 

HLH42175 1-3/4” pair ........ $3.99 

HLH42200 2” pair .............. $4.39 

HLH42225 2-1/4” pair ........ $4.89 

Landing Gear, Retracts & Wheels 

HLH42250 2-1/2” pair ........ $5.49 

HLH42275 2-3/4” pair ........ $5.99 

HLH42300 3” pair .............. $6.29 

HLH42350 3-1/2” pair ........ $9.39 

HLH42400 4” pair .............. $9.99 

Ultra light pre-painted plastic scale wheels for 

slowflyers 

SIR610 2-3/8” Scale Plastic Wheels, 

pair…................... $5.29 

2-3/8” diameter, 7/16” wide, 5.5 grams 

each. Nice vacuformed pre-assembled and 

painted scale type wheel for Slowflyers. 

Ultra-light, incredibly 

strong aircraft 

wheels designed 

for Electric Flight 

Two conflicting needs for electric 

flight wheels: they must be extremely lightweight, but they must also 

be strong because the heavy batteries in electric 

airplanes put great pressure on landing gear and 

wheels. “LYT” wheels are made of an unusual 

foam which is extremely light but which only compresses 

ten percent under a ten pound load. We 

know of no other lightweight wheels which can support 

a heavy electric airplane yet withstand the 

stress that a heavy airplane puts on them. 

Axle hole diameter for 3/4”, 1-5/16” wheels is about 1.6mm (1/16”); 

Axle hole for 1-3/8” through 2-1/16” wheels is about 2.6mm (3/32”); 

Axle hole for 2-3/8 through 2-7/8” wheels is about 3.6mm (1/8”) 

LYT20 “LYT” 3/4” Wheels, pair (.45 grams each) .................. $3.39 

LYT26 “LYT” 1” Wheels, pair (1.4 grams each) ..................... $3.39 

LYT32 “LYT” 1-5/16” Wheels, pair (1.8 grams each) ............. $3.39 

LYT35 “LYT” 1-3/8” Wheels, pair (2.3 grams each) ............... $4.49 

LYT43 “LYT” 1-11/16” Wheels, pair (2.7 grams each) ........... $4.59 






Strong electric 

brake for Kavan’s 

BIG Scale 

Airwheels 

Axles 

DUB248 Dubro 5/32” Dia. Axle 

Shafts, pr. ......................................... $5.59 

2” long. Tempered steel, use 5/32” wheel 

collars. Drill a 5/16” hole in your aluminum 

or (up to 1/4” thick) fiberglass landing gear 

legs. 

DUB246 Axle Shafts, 1/8” x 1-1/4” .......................................... $5.59 

DUB247 Axle Shafts, 5/32” x 1-1/4” ........................................ $5.59 

DUB248 Axle Shafts, 5/32” x 2” .............................................. $5.59 

Strong tempered steel axle shafts. Use 1/8” wheel collars on DUB246 

and 5/32” wheel collars on DUB247 and DUB248. 

Electric Brake 

HLFK263 Kavan Magnetic Brake ................... $59.99 

About 1.5” diameter. Use a 9v transistor radio battery and a micro 

switch that’s hit by “down” elevator servo movement. Braking is strong 

-- a single brake on nose wheel gives good stopping. Two on main 

wheels are even stronger. 6mm axle hole can be drilled to 1/4” or 

shimmed with 7/32” brass tubing (KSN130) to 3/16” axle. 

Complete float set including water rudder 

SFM3881 ABS Floats for .40- 

.60 Airplanes .................... $49.99 

34-1/4" long x 4-3/4" wide x 4" tall, 

22-14" wide when both floats are 

assembled. Each ABS float 

weighs about 11 oz. without hardware. 

Works well with airplanes 

from 8-11 pounds flying weight. 

Complete with main and front gear 

legs, spreader bars, mounting hardware, and reinforcements for mount 

points. One float comes with the rudder mount pre-installed; the steering 

arm and cable are included. Complete instructions with illustrations 

are included. Floats come in gloss white and do not need to be painted. 

Excellent water handling is provided by the V-hull design with extra 

strakes for directional stability. 


92 

Long Extensions for aileron 

servos 

One end plugs into receiver. Servo plugs 

into other end. Useful when servos are 

mounted in the wing out near the ailerons 

or for servos mounted in the tail of a plane. 

24” long Extension Cable for Aileron Servos, each ............... $4.99 

HLAE320 for Hitec/JR 

HLAE321 for Airtronics (old style) 

HLAE322 for Futaba J 

36” long Extension Cable for Aileron Servos, each ............... $5.59 

HLAE340 for Hitec/JR 

HLAE341 for Airtronics (old style) 

HLAE342 for Futaba J 

Heavy guage aileron 

extensions for high power 

applications 

These heavy-duty extension leads are 

great for high torque servos when mounted 

far away from the receiver. They are 

made of 22-gauge wire and have gold connectors for solid contact and 

full voltage transfer. Plugs are for Hitec and JR servos. 

HT0600 3" HD Servo Extension (22 ga.) ................................ $4.99 

HT0603 6" HD Servo Extension (22 ga.) ............................... $6.49 

HT0604 12" HD Servo Extension (22 ga.) .............................. $6.69 



Gyros 

Positive lock for 

servo plugs 

GR3503 Graupner Servo Connector 

Retaining Clip, 5 pcs. ..................... $9.99 

Simple effective method of keeping your 

servo leads connected. 

Reduce glitches in long servo leads 

Long servo leads can generate 

electrical "noise" as your airplane 

travels through the air, this in turn 

creates glitches in your servos and 

in extreme instances loss of control. 

By simply wrapping the extension 

around the ferrite noise reducer 

at the receiver end of the extension, 

glitches are eliminated. Use 

5mm for standard servo leads and 

8mm for heavy-duty servo leads. Use one per long servo lead. 

GR98516 Graupner Clamping Ferrite Noise Reducer, 

5mm ID ........................................................................................ $5.99 

GR985161 Graupner Clamping Ferrite Noise Reducer, 

8mm ID ........................................................................................ $7.99 

Rock solid heading hold gyro with 

lightning fast metal gear digital servo 

HTS4192 Hitec HG-5000 Micro Gyro and 

Digital Servo Combo ...... $179.99 

Gyro: 7/8" x 7/8" x 7/16", 10 grams, operating voltage of 4.5 to 5.5 

volts. Terrific gyro and servo combination for all 400-600 class helicopters. 

All programming is done using the menu button on the gyro. 

Programmable functions are: Gain, Direction, Servo speed, Rotation 

rate and limit for both left and right stick inputs. Built-in temperature 

sensor removes servo drift due to changes in temperature. Gyro works 

with both analog and digital servos. Has remote gain adjustment. 

HSG-5083MG Digital metal gear servo: 1-1/8" x 1/2" x 1-3/16", 21 

grams, 20.85 oz./in. of torque, 0.07 sec/60 degrees (blindingly fast). 

Digital metal gear servo for use with HG-5000 gyro only. 

Non-programmable. 

Servo Accessories 

Mixers, Delay Modules 

Fly V-Tail & Flying Wing planes 

without buying a new radio! 

GR3020 Graupner V-Mixer 

for V-Tail or Elevons ....................... $39.99 

Plug in this electronic mixer between your 

receiver and servos for use in V-Tail, Flying 

Wing and Delta Wing models. It makes 

parallel and opposite mixing of 2 servo functions possible. Mix elevator 

and rudder for V-Tail models, or elevator and aileron for Delta and 

Flying Wing models. The mixer can also combine ailerons together 

for use as flaps or speed brakes. 

Delay Modules 

Adjust the speed 

of a servo 

NFSD1 Servo Slow 

Down Module .................................. $19.99 

3/8" x 1" x 3/16", 3 grams. Tiny unit allows 

you to adjust the speed of any proportional 

servo from .7 seconds to 14.7 seconds in 16 

steps. Plug module into the receiver channel 

that you want to control, plug the servo into 

module, and adjust the speed using the screw on the side of module. 

Great for setting scale speed on retracts (with proportional servo) or 

scale speed for operating flaps. The longer transition times are ideal for 

marine models. Can be used to slow the operation of 2 servos with the 

addition of a "Y" connector. 

Voltage Regulator 

Provide reliable power to your 

receiver and servos 

7/8" x 2" x 7/8", about 1-1/4 oz. 

Regulator is designed to operate on 

input voltages from 5 to 12 volts, allowing 

you to power your receiver and servos 

with a high capacity, yet lightweight, 

Lithium Ion or Lithium Polymer battery pack. Why would you need this 

If you have a larger model with many servos, particularly digital servos 

that use a lot of current, you need a reliable power source of high 

capacity. Regulator with failsafe switch is pre-wired and ready for use. 

Should the switch or the wiring between the switch and regulator fail, 

the regulator will stay in the "On" position and continue providing power 

to your radio and servos. 


w/Failsafe Switch, 5.1V ............................................................ $57.99 


w/Failsafe Switch, 6V ............................................................... $61.99 

Never crash another plane due to 

a low receiver battery 

DUR43051 Duralite Digital Load 

Tester ........................................... $54.99 

Reads input voltages from 4 to 18 volts. By 

checking your receiver battery under load, 

weak batteries or undercharged batteries can 

be detected prior to the loss of your model. 

Detector will check batteries under 1/2A, 1A, 

or 1-1/2A loads depending on which button is depressed. Readout is 

on a large clear digital screen. Unit is reverse polarity protected. Use 

with Nicad, NiMH, Li-Ion and Li-Poly cells. 

Incredibly bright LED 

navigation lights 

run for hours 

AT3318 Super-Brite Flashers, 

1 Red and 1 Green ............ $6.99 

Approximately 1/2" thick, 3/4" x 7/8” 

base. Flashers include foam mounting 

tape, replaceable batteries, and a tiny slide switch to turn them on. 


Test Equipment 

Test and center your servos 

before you install them 

MSA725 Manual Servo 

Adjuster ..................................... $9.99 

Tiny 1-3/8”x7/16”x 7/8”, 8 grams. Servo 

adjuster allows you to connect 1 or 2 

servos for centering or testing without 

the use of a receiver and transmitter. 

Connect any 4-5 cell receiver pack for power, plug in your servo(s), 

rotate the knob to test the travel then return the knob to the middle to 

center your servos. 

Miscellaneous 

Completely assembled, 

painted pilot is VERY lightweight 

FSK101 Pilot “Slim” for 

Slow and Park Flyers .............. $12.99 

Glued together and nicely hand painted. About 

3” high waist to top of head. Cut off to fit your 

cockpit. Good lightweight pilot bust for any 

slow/park flyer. 

Pre-painted - ready to install 

Checks voltage of 4-10 cell NiCad/NiMH or 1-3 

LiPo packs 

EB2001 Digital LCD Voltage 

Indicator ........................... $10.99 

About 2-1/4”x1-5/8”x5/8”, 1.3 oz., 

Large easy-to-read 3/8” LCD display 

indicates voltage of any battery 

pack 4-13 Volts DC instantly. Use 

with 4-10 cell NiCad and NiMH 

packs or 1-3 LiPo cells. Accurately 

check the voltage of your Rx. pack before you fly. 

Windsock 


Windsock ....................... $28.59 

36” long, 10” diameter with harness 

and clip. Bright red “Graupner” imprint. Made of polyamide fiber. 

Pilot Busts 

Very lightweight hand painted pilot heads 

SIR110 Jack 1:10 Scale Head .......... $5.69 

2-1/4" wide x 2-1/8" high, weighs 3.2g. 

Handlebar mustache, goggles. 

SIR112 Langley 1:12 Scale Head ..... $5.69 

1-5/8" wide x 1-5/8" high, weighs 2.3g. Scarf, 

goggles. 

SIR160 Buddy 1:6 Scale Head ......... $7.99 

3" wide x 3-1/2" high, weighs 12.25g. Civil with 

sunglasses and headset 

SIR162 "HL" Tony 1:6 Scale Head .. $8.99 

2-1/2” wide x 3” high, weighs 9g. Yellow 

t-shirt, white baseball cap, Hobby Lobby logo. 

SIR165 Garry 1:6 Scale Head ........... $8.99 

3-1/4” wide x 3” high, weighs 7.8g. Raised 

goggles. 

SIR175 Zero Pilot 1:7 Scale Head .... $8.99 

2-7/8” wide x 2-1/2” high, weighs 8g. Fur 

collar, goggles up. 

Small, scale, super light, hand painted 

KMP101 1/6 Scale WWII American 

Pilot Bust ..................................... $19.99 

KMP102 1/6 Scale WWII British Pilot 

Bust .............................................. $19.99 

KMP103 1/6 Scale WWII German Pilot 

Bust .............................................. $19.99 

Each pilot is approximately 2-7/8" wide,3-1/8" tall, 1-3/4" deep, and 

weigh about 1-1/4 oz. Each figure is expertly painted and ready to 

install in your 1/6 to 1/7 scale warbird. Hollow molded from flexible 

vinyl. 

Scale Instruments 

Super detailed, 

pre-assembled cockpit instruments 

P-51 instrument panel created with our 

instruments and decals 

Scale instruments 

for your 1/5 and 1/4 scale 

WW2 planes 

PP41041 1/4 Scale German - $21.99 

PP51041 1/5 Scale German - $21.99 

PP41051 1/4 Scale American - $21.99 

PP51051 1/5 Scale American - $21.99 

Each set includes 10 pre-assembled instruments with separate bezels 

ready for you to install in your WW2 aircraft. Set also includes waterslide 

decal sheet of in-cockpit placards for super detailing your model. 

(not pictured) 

PP41071 1/4 Scale Great Britain ............................... $21.99 

PP51071 1/5 Scale Great Britain ............................... $21.99 

Scale instruments for 

modern civil aircraft 

PP41011 1/4 Scale General Aviation, 

Set 1 ......................................... $21.99 

PP51011 1/5 Scale General Aviation, 

Set 1 ......................................... $21.99 

PP41012 1/4 Scale GA/Sport, 

Set 2 ..................................... $21.99 

PP51012 1/5 Scale GA/Sport, 

Set 2 ..................................... $21.99 

Each set includes 10 pre-assembled 

instruments ready for you to install in the dashboard of your Cessna, 

Piper or sport scale model aircraft. Set also includes waterslide decal 

sheet of in-cockpit placards for super detailing your model. The 1/5 

scale instruments are appropriate for use with .40-.60 powered models. 

The easy way to add accurate scale details 

SIR212 Tom 1:12 Scale Pilot Head ......................................... $6.29 

1-1/2" wide, 1-7/8" high, weighs 2.7g. T-shirt, sunglasses. 

SIR312 Fighter 1:12 Scale Pilot Head .................................... $6.29 

1-7/8" wide, 1-1/2" high, weighs 3.2g. Goggles. 

SIR412 Cougar 1:12 Scale Pilot Head .................................... $6.29 

1-7/8" wide, 1-7/8" high, weighs 3.6g. Helmet and Oxygen mask. 

PP2001 1/4 Scale Flight Yoke, 

pair .......................................................... $8.99 

2-3/4" wide, 1-1/2" high, 3/4" long 4mm rod in 

rear to mount to dashboard. Set of 2 injection 

molded black plastic control yolk, similar to that 

found in modern Cessna and other civil aircraft. 


94 

Airborne Tricks 

Thick smoke trails for model 

airplanes 

Small Smoke Cartridges are 2-1/2” long, 

11/16” diameter, 2/3 oz. Large Cartridges 

are 2-1/2” long, 1-5/16” diameter, 2 oz. 

Both sizes produce about 4 minutes of 

thick smoke with the large cartridges producing 

a plume about twice the diameter 

of the small cartridge plume. Insert the cartridges in one of the two 

Carriers and attach the Carriers to your model’s wing or fuselage. 

RK7050 Small Smoke Cartridges, Assorted Colors, 5....... $26.99 

RK7051 Small Smoke Cartridges, White, 5 ........................ $26.99 

RK7060 Large Smoke Cartridges, Assorted Colors, 5 ...... $48.99 

RK7061 Large Smoke Cartridges, White, 5 ....................... $48.99 

RK7058 Carriers for Wing, 2 .................................................. $11.99 

RK7068 Carrier for Fuselage ................................................ $11.99 

Wreak havoc — 

spread destruction! 

HLH207 BOMB ................................... $5.99 

Our “exploding” bomb is molded of fiberglass-filled 

nylon so you can reuse it as often 

as you want. 5-1/2” long, its two halves 

pop apart on impact releasing flour or talcum in an impressive burst. The carrier 

release mechanism is strong and releases the bomb positively. Contains 

one bomb and one release mechanism. 

Bombs away (or water 

balloons) with “Jumper”! 

HLAD002 “Jumper” Drop Device 

Fully Built ................................... $15.99 

6-1/2" long overall. Lite-ply cargo bay is 3- 

1/8” x 3-1/8" inside. Attach to the side or belly 

of any R/C airplane with rubber bands. Weighs 4 oz. with a standard 

servo mounted. Single door is easy to load and control. Load it with 

anything you want, hit the switch on your radio, and out comes the payload. 

Includes double-sided servo mount tape. Paint or cover as 

desired. Servo not included. Requires one servo and one channel. 

HLAD003 Parachute for "Jumper".............................................. $8.99 

22” diameter. Rugged, the strings are sewn on and the border seam is 

rolled for strength. Braided strings eliminate tangles. High visibility red. 

Modeling Pins 

PP2006 1/4 Scale Sailplane 

Cockpit Details ...................................... $9.99 

Set of 5 injection molded plastic parts. Handles 

for the spoilers, landing gear, control stick and 

canopy as well as the microphone head and the 

T-handle for tow release. 

When a modeler makes 

the modeling pins you get 

modeling pins instead of 

dressmaking pins 

HLMO0002 HL/Modela Modeling Pins, 50 ....................................... $5.99 

Each pin is about 1-1/8” long. These have very narrow shafts and long taper 

points to prevent wood splitting. The metal shafts are bent 90 degrees inside 

the plastic end so they can not pull out. The plastic end has a shoulder so 

these can be used as compression clamps during gluing. 

Miscellaneous 

Super strong for critical control 

DUB675 Super Strength Long Servo 

Arms for Hitec ................................... $8.99 

An assortment of 8 high strength servo horns 

that fit Hitec servos from the HS-60 up 

through the full size HS-422. Great for those 

applications that require either high strength 

or the added throw of a longer control horn. We use these on a HS-85 

in our mechanical retract installations, it gives us the added throw 

needed for a solid lock both up and down. 

Never gouge a wing with a 

screwdriver again 

GR142 Graupner E-Z Turn Wing Bolts with 

Blind Nuts, 10 pair ................... $3.99 

1-9/16" long wing bolt with 1/4"-20 thread. Thumb-screw head requires 

no tools. Made from reinforced nylon, includes nylon blind nuts. 

LOW prices on knives and tool sets! 

HLT001 Small Knife .............. $1.99 

Takes HLT006 blades. 

HLT006 100 Pack P#11 Blades ....... $16.59 

Extremely sharp. 100 pack saves money. 

Fits small knife. 

HLT008 100 Pack Single Edge Razor Blades ..... $8.99 

Still the most useful blade of all. These are hard to find 

in stores. 

HLT004 Razor Saw Set ............. $7.99 

The Heavy Knife handle with fine and 

coarse stiff-back, thin razor saw blades. 

HLT003 Knife and Saw Set .......................... $33.99 

All 3 knives, Razor Saw, Miter box, burnisher, probe. 

Sander and large assortment of blades in a well 

made wood box. 

Tip Drill has 12 drill bits 

inside the handle 

KT569 Tip Drill with Bits ................ $8.99 

4” long, comes with 12 bits sizes 52-74 (the 

largest is 1/16” dia.). The easiest way to drill small holes, better than a crank 

tool or Dremel for small holes. 

Any balsa planer can plane with 

the grain — but very few can 

plane across the grain! 

Made of cast and machined aluminum, 3.3” 

long by 2” wide. This German made balsa 

planer uses double-edge razor blades. The 

amount of blade extension can be easily adjusted and blade replacement 

takes only a few seconds. The secret of using extremely sharp but 

very thin and flexible double-edge razor blades for balsa planing is in the 

blade clamping mechanism. This planer has a strong steel full width 

clamp and an accurately machined base. 

HLAE801 Sollingen Balsa Planer ......................................... $13.99 

HLAE802 5 Spare Blades ...................................................... $10.99 

Use to cut balsa sticks 

from sheet Balsa Wood 

Save up to 90% 

on balsa sticks! 

HLH625 Balsa Stripper ............................................................. $23.99 

Example: You can cut 10, 3/8” square sticks from a 4” wide sheet of our 

Bulk Sheet Wood. These sticks would cost you $6.00 if you bought them 

ready cut. Your cost for these 10 sticks if you cut them yourself is only 

$2.50! 

Our balsa stripper will accurately and easily cut balsa sticks 36” or 48” 

long, and up to 1/2” thick and 5/8” wide. It includes a 36” long extruded 

aluminum guide channel. This guide channel assures straight cuts even 

if the edge of the sheet wood is irregular. 

HLH6251 Extra Blades for Balsa Stripper, each ....................... $1.59 


Tools 

For electrical and plastic cutting 

MT3610 5" Carbon Steel Side Cutters 

............................................................ $4.99 

Light duty cutters with rubber grips for electrical 

wiring. Ideal for cutting servo leads and electrical 

wires on motors and speed controls. Also 

great for cleanly cutting plastic parts off of a 

parts tree. Not made for cutting music wire. 

Heavy duty pliers make 

clean cuts 

MT3611 5" Heavy Duty Wire Cutter Pliers 

............................................................ $7.99 

Cuts music wire up to 5/64" with ease. Great 

for cutting pushrods without leaving sharp 

ends. Cuts are square ended and much easier 

to make than with side cutters. 

Comfortable rubber grips. 

Special scissors for ABS plastic 

MT3527 Curved Canopy 

Trim Scissors ................ $8.99 

5-1/2" long, extremely sharp, with 

slightly curved blade. Expressly for 

cutting thin plastic canopies, wheel 

pants, cowls, vacuformed styrene 

parts, etc. 

Machined tempered steel 

shafts 

for a solid no strip fit 

MT3415 Aluminum Handle Metric 

Hex Driver Set, 4 ................ $23.99 

5-3/8" long with color-coded knurled 

handles. Metric sizes 1.5mm, 2mm, 

2.5mm, 3mm. 

Ideal for the flying field - fits 

in your pocket 

MTH3440 "All-in-One" Metric Hex 

Driver Set ................................. $24.99 

3-5/8" long x 3/4" dia. handle with 4 metric 

hex wrenches inside. The handle is 

carbon fiber tube with anodized aluminum 

ends. Handle contains 1.5mm, 2mm, 2.5mm, and 3mm hex 

wrenches machined from 3.5mm hardened steel shafts. Assembled 

length is 6-1/8". Light and easy to carry, great for the field box. 

A must for every 

helicopter pilot 

MT3605 Curved Ball Link 

Pliers ........................................... $17.99 

Makes installing, removing and adjusting 

ball links very easy. 

NEW! 24 hardened tips---Slot, Phillips, 

Metric Hex, Torx 

MT3493 Precision All Purpose Driver Set ............................ $29.99 

13 double-ended drivers with hardened tips and 

a cushion grip quick-change ratcheting handle. 

Set includes 4-slotted screwdrivers, 1.5mm, 

2.0mm, 3.0mm, and 4.0mm widths. 6-Phillips 

screwdrivers, PH.000, PH.00, PH.0, PH.1, PZ.0, 

PZ.1 sizes. 6-Metric Hex drivers, 1.5mm, 

2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm. 8-Torx 

drivers, T5, T6, T7, T8, T9, T10, T15, T20. Each 

driver fits the ratcheting handle and can be adjusted to an overall length 

of 6-1/2” to 10-1/2”, giving you the flexibility to perform nearly any job. 

Entire set comes in a sturdy 5”x7”x1” hard plastic organizer case. 

High quality precision tools for all 

modelers 

MT3609 6" Long Nose Pliers w/Spring 

Handle ................................................. $10.99 

Top quality tool-steel pliers precision ground to a fine point for reaching 

into small spaces. Serrated jaws hold small parts securely. 

Metric Hex Drivers with long shank and comfort grip 

make removing hex screws easy 

MT3475 4 pc. Metric Hex Driver Set .......... $10.99 

6-7/8" long metric hex drivers. Great for removing 

stubborn metric hex head screws. Precision 

machined from hardened steel for perfect fit. Tip 

sizes are 1.5mm, 2.0mm, 2.5mm and 3.0mm. 

Metric nut drivers with long 

shank make easy work of 

loosening nuts 

MT3480 Metric Nut Drivers: 8mm, 

7mm, 5.5mm, 4mm, 4 pcs. .......... $10.99 

6-7/8" long metric nut drivers. Great for working on helicopter blade 

grips and locking nuts. 

Cut 1mm to 14mm dia. holes 

in wood, fiberglass or plastic 

MT3417 Super Reamer, 14mm .. $18.99 

Hardened steel Super Reamer easily drills 

holes in plastic canopies and fiberglass 

cowls without tearing the material like a drill bit does. Has a carbon 

fiber handle and an aluminum cap to protect the tip while not in use. 

NEW! Color-coded 9 piece Metric nut drivers in 

zipper case 

MT3492 Metric Nut Driver Set w/Case ............................. $29.99 

8 individual color coded metric drivers; 3.0mm, 

3.5mm, 4.0mm, 4.5mm,5.0mm, 5.5mm, 6.0mm, 

7.0mm. Each driver inserts into the 

driver handle and can be adjusted from a total 

length of 6-1/2” to 10-1/2” for those hard to reach 

nuts. Driver automatically locks at any length 

that you choose. The handle has a built in ratchet 

for clockwise/counterclockwise operation, or it 

can be locked for standard use. All the parts come organized for easy 

transport in a 4”x7”x1-1/4” zippered case. 

Velcro for holding batteries, 

hatches in place 

VEL001 6” Velcro, Black .................... $2.39 

Ever wished you had an extra hand 

PVS100 "Hip Clip" Hands-Free Radio Holster ..................... $14.99 

3-3/4" x 2" x 1/2", weighs about an 

ounce. Constructed of black leather 

with a Velcro catch on one side and a 

belt clip on the other. Makes it easy to 

carry your transmitter on your belt 

while carrying your plane and toolbox 

out to the flight-line. Easily remove 

your radio from the "Hip Clip" with one 

hand. Rugged design for years of trouble-free 

use. 


Tiny hardware for Slow and Park Flyers! 

Hardware, Tools and Miscellaneous 

DUB845 Mini E/Z 

Connectors, 2 ..................................... $2.69 

DUB847 Micro 20”Pushrod System ..... $5.29 

DUB852 Micro 30” Pushrod System.... $6.29 

DUB848 Micro Control Horns, 2 .............. $1.59 

Do you want to know the best way to hook up a 

pushrod with clevises, threaded couplers, and 

pushrod connectors Don’t! 

HLFK6232 Kavan Z-Bend Coupler 

for 1/16 Wire, pack of 10 ....................... $6.39 

HLFK6230 Kavan Z-Bend Coupler 

for 5/64 Wire, pack of 10 ....................... $6.39 

Z-Bends are the best way to connect a servo 

output to a pushrod. Z-Bends are the best way 

to connect the other end of a pushrod to the control 

surface’s control horn. You solder these ready-made Kavan Z-Bend 

Couplers to a music wire. If you judged the length wrong, melt the solder 

and move the Z-Bend Coupler. The ends are 1.5mm diameter which 

fits the holes in servo arms and control horns exactly. 

DUB849 Micro E/Z Link, 4 ................. $1.39 

These very lightweight hardware items are 

small sized and lightweight for Slow and Park 

Flyer models. 

DUB850 Micro Aileron Torque Rod Set - $5.29 

DUB846 Micro 

Pull-Pull System ......................… $8.39 

DUB853 Micro Tail Skid …................... $1.79 

High performance zero-slop control 

horns 

GR1023 Graupner 3-Point 

Control Horns, pair .................................... $7.89 

Approx. 3/4” x 7/8” base, 1 1/8” tall. Adjustable 

from 1/2” to 1” height. For surfaces up to 9/16” thick. 

GR36731 Graupner 3-Point Control Horn with Ball-link ......... $5.89 

Approx. 3/4” x 7/8” base, 1 1/2” tall. Adjustable 

from 1/2” to 1 1/2” height. Ball-link accepts 2-56 

thread. For surfaces 5/16” to 9/16” thick. 

GR36681 Graupner Mini Control Horn ... $9.69 

Approx. 5/16” x 5/8” 

base, 3/4” tall. To mount simply drill a 4mm 

(5/32”) hole and glue in place. For surfaces 

up to 5mm (+3/16) thick. 

96 

DUB868 Micro 

Wheel Retainers …..................... $1.19 

GR358908 Graupner Micro Pushrod 

Keepers, 10 pcs. ......................... $2.79 

Light, quick and secure retention for "L" 

bent wire pushrods from 1/32" to 1/16" 

diameter. 

Adjustable clevis clamps 

directly to pushrod! 

RA107 Security Clamp Clevises, 2 ........ $2.49 

Holds securely because screw clamp is solid 

brass. Nylon clevis is strong enough for very 

large control surfaces. It is short — less than 1” 

long — so it fits where there’s no room for a threaded coupler. Instantly 

adjustable and you don’t have to open the clevis to make the adjustment. 

Multi-purpose hinge 

DUB923 Micro Pushrod 

Guide, 4 ........................................ $1.49 

MJ2533 Point Hinges, 12 

...................................... $4.49 

1-7/8" long, 1/8" square shaft 

changing to a stepped round 

section designed for solid gluing into flight surface. Can be used for 

ailerons, elevator and rudder in balsa or foam aircraft. We use these 

for adding a functional rudder to foam parkflyers that come with fixed 

rudders. 

Micro control horns 

for small planes 

The long offset gives a reach of 1/4” from the 

front edge of horn. The short offset gives a 

reach of 3/32” from the edge of horn. Very 

lightweight plastic with barbed prongs to better hold the glue. The 

holes for the pushrods are 1/32” and can be enlarged if necessary. 

MJ2202 Micro Control Horns, Long Offset .......................... $1.29 

MJ2204 Micro Control Horns, Short Offset .......................... $1.29 

Pushrods 

Complete Flexcable Pushrods -- 

Everything included! 

HLH5205 Complete FlexCable Pushrods, 2 ........................... $6.59 

8 feet of our special metal cable, nylon tubing, 2 threaded couplers, 2 

Pushrod Connectors (for servo outputs), 2 Kavan metal clevises, 2 mini 

Nylon clevises -- enough for two 4 foot long flex pushrods. 

HLH501 “Best” Complete Throttle Pushrod ........................... $1.99 

20” special metal cable, nylon tube, threaded coupler, mini nylon clevis, 

metal clevis. Enough for one throttle or nose steering hookup. 

Very special flexible COMPLETE pushrod for Mini 

and Electric Flight airplanes 

HLFK0623 Kavan Electric Flight 

Complete Pushrod Set, 2 .......................... $6.69 

Two 36” long complete pushrods that use tiny 1/32” 

music wire for small models like park and indoor flyers. The control surface 

end has a factory made z-bend. The servo end is secured using the 

included micro pushrod connectors. VERY 

precise, VERY lightweight, VERY easy to use. 

Joins 2 pushrods to 1 

GR9034 Triple Rod Connector ............................... $7.99 

A machined fitting that is about 1/2” long, in which are three holes for pushrods 

and holes for Allen set screws. It can be used for such linkages as a 

single pushrod from a servo connected to split elevators, or to flaps, or from 

dual servos to a boat rudder. 

The best way we’ve seen to bring a 

pushrod out of a fuselage! 

Puts an end to slop and backlash caused by running 

a bent wire pushrod linkage through a fuselage. Use one for 

rudder pushrod, one for elevator. Simple to install: it also 

prevents those big ugly wallowed-out exit slots that your receiver 

could fall through. 

HLH210 SLEC Pushrod Transfer Linkage, 2 .......... $2.59 


Ball Links, Connectors, Clevises, 

Control Horns 

These oversize ball links are 

SAFER! 

Very large ball links 1” long. These are 

much safer for flight control uses than smaller types. These are also 

strong enough for use in steering linkages in RC cars and helicopter 

rotor control. 2-56 and 4-40 threaded rods will self-thread into the control 

rod end. 

HLH518 Oversize Ball Link, small stud ................................... $0.99 

HLH519 Oversize Ball Link, large stud ................................... $0.99 

Smaller Pushrod Connectors 

for Slow and Park Flyers 

MJ2765 Micro Pushrod 

Connectors, 6 ............. $4.99 

Overall length of each connector 

is only 5/16”. For easy adjustment 

of pushrods in small planes. 

Phillips set screw locks pushrod in 

place. Starlock holds connector in 

servo output wheel. 

Threaded 

Pushrod 

Connectors are 

safer and more 

adjustable than set-screw types. 

HLFK3061 Threaded Pushrod Connectors, 2-56, pack of 2 ...... $6.99 

Instead of clamping a pushwire to your servo output these are 2-56 threaded 

for max safety. The pin through the servo output arm is threaded and is held 

in place with a nut for removing and for relocating along the servo output arm. 

Move control 

surfaces accurately with 

no horns or pushrod 

showing! 

CH901 Hidden Control Horns, pair ............................................... $5.99 

7/8” wide, 1-1/8” long. Can be installed inside a wing, horizontal stab, or 

vertical fin to actuate, respectively, the ailerons and flaps, elevator, or rudder. 

Each package contains one left and one right actuator that move in 

opposite directions. There is almost no backlash or “slop”. Swivel ball links 

are included for hookup to your pushrod or cable ends. 

BIG control horns or fastening point 

for flying wires 

GR36764 Graupner Aluminum 

Control Horns, 5 ........... $14.99 

Can be used as control horns in 

a pull-pull system, or as hard 

points to attach wire bracing for 

wings or tail. Weigh less than 1 

gram each and are 7/32” dia. x 

5/16” long, with a 3/8” dia. reinforcing 

ring. Mounts thru the surface to be controlled, large glue surface 

provides solid installation. Threaded section has about 1/4” of 

adjustment and is pre-drilled for standard clevis. 

BIG control horns or fastening point 

for flying wires 


Brass Control Horns, 

pk. of 5 .............................. $13.99 

Can be used as control horns in a 

pull-pull system, or as hard points to 

attach wire bracing for wings or tail. 

Adjustable. Weigh less than 3 grams each and are 1/4” dia. x 5/16” 

long, with a 1/2” dia. reinforcing ring. Large glue surface provides solid 

installation. Threaded section has about 1/4” of adjustment and is predrilled 

for standard clevis. 


Carbon Fiber Tubes, Rods and Strips 

The quickest and lightest way to increase strength in your model structures. 

Use the smallest of the carbon rods to brace the tails of your 

foam profile planes, or make up you own carbon pushrods from rod or 

tube. Add a length of carbon rod to the leading edge of your foam 

model to make it impervious to the dings that are common while landing. 

Laminate some carbon strip to the sides of a spar to make it radically 

stronger, but not a lot heavier. Can be glued with CA, epoxy or 

Graupner’s, GR959 “Uhu Por”. 

Carbon Fiber Tube, 1000mm long, 

O.D. x I.D. in mm 

GXT3012 3.0 x 1.2 ........... $2.90 

GXT3015 3.0 x 1.5 ........... $2.60 

GXT3020 3.0 x 2.0 ........... $2.20 

GXT3518 3.5 x 1.8 ........... $3.30 

GXT3520 3.5 x 2.0 ........... $3.30 

GXT3525 3.5 x 2.5 ........... $2.40 

GXT4020 4.0 x 2.0 ........... $4.40 

GXT4025 4.0 x 2.5 ........... $3.60 

GXT4030 4.0 x 3.0 ........... $2.70 

GXT4525 4.5 x 2.5 ........... $5.20 

GXT4535 4.5 x 3.5 ........... $3.40 

GXT5030 5.0 x 3.0 ........... $5.40 

Carbon Fiber Square Tube, 

1000mm long, outside dim. x 

inside dim. in mm 

GXQ4030 4.0 x 3.0 ................. $5.90 

GXQ8070 8.0 x 7.0 ................. $9.60 

Carbon Fiber Rod, 1000mm long, 

O.D. in mm 

GXR10 1.0 ........................ $1.30 

GXR12 1.2 ........................ $1.30 

GXR13 1.3 ........................ $1.30 

GXR15 1.5 ........................ $1.30 

GXR16 1.6 ........................ $1.40 

GXR18 1.8 ........................ $1.40 

GXR20 2.0 ........................ $1.70 

GXR25 2.5 ........................ $2.20 

Metric Sizes, Brass tubing, music wire 

Metric Brass Tubing, 

9-1/2" long 

Useful for bushings, adapting metric diameters to USA, making metric drilled 

wheels fit USA dimension axles. These accurately telescope into each other, 

and fit accurately over the metric music wire. 

Metric Music Wire, 

9-1/2" long 

For bearings, adapting to 

metric tubing. Use the less 

expensive USA sizes for 

large or long things like landing 

gears, pushwires. 

Metric Threaded 

Rods, 9-1/2" long 

Mild steel with zinc plating. 

Fully threaded. 

GXT5040 5.0 x 4.0 ........... $3.40 

GXT5532 5.5 x 3.2 ........... $6.80 

GXT5535 5.5 x 3.5 ........... $6.20 

GXT5540 5.5 x 4.0 ........... $5.30 

GXT5842 5.8 x 4.2 ........... $5.70 

GXT5845 5.8 x 4.5 ........... $5.20 

GXT6030 6.0 x 3.0 ........... $9.20 

GXT6040 6.0 x 4.0 ........... $6.60 

GXT6050 6.0 x 5.0 ........... $4.60 

GXR30 3.0 ........................ $3.20 

GXR35 3.5 ........................ $4.10 

GXR40 4.0 ........................ $5.60 

GXR45 4.5 ........................ $6.90 

GXR50 5.0 ........................ $8.70 

Carbon Fiber Strips, 1000mm long, thickness x width in mm 

GXS1030 1.0 x 3.0 ............... $2.80 

GXS1040 1.0 x 4.0 .............. $3.40 

GXS0510 0.5 x 10.0 ............ $4.30 

GXS0825 0.8 x 25.4 .......... $10.60 

Stock No: OD (mm) ID (mm) Price: 

HLRE0500 ......... 2 ......... 1.6......... $0.99 

HLRE0501 ......... 3 ......... 2.1......... $1.99 

HLRE0502 ......... 4 ......... 3.1......... $1.99 

HLRE0503 ......... 5 ......... 4.1......... $1.99 

HLRE0504 ......... 6 ......... 5.1......... $1.99 

Stock No: Diameter (mm): Price: 

HLRE0521 ......... 1.0 ................ $0.99 

HLRE0522 ......... 1.5 ................ $0.99 

HLRE0523 ......... 2.0 ................ $0.99 

HLRE0524 ......... 3.0 ................ $0.99 

HLRE0525 ......... 4.0 ................ $0.99 

HLRE0526 ......... 5.0 ................ $1.99 

Stock No: Thread size (mm): Price: 

HLRE0540 ............ M2 ................ $2.99 

HLRE0541 ......... M2.5 ................ $2.99 

HLRE0542 ............ M3 ................ $2.99 

HLRE0543 ............ M4 ................ $2.99 


98 

Slotted Cheese 

A Head Machine 

Screws Packed 

10 screws per 

bag .......... $1.49 

B 

C 

D 

E 

F 

G 

J 

K 

L 

M 

US Sizes Brass Tubing, Music Wire 

Round Brass Tubing, 12” long 

(telescoping - OD given): 

KSN125 1/16" ..................... $1.09 

KSN126 3/32" ..................... $1.09 

KSN127 1/8 ........................ $1.29 

KSN128 5/32" ..................... $1.49 

KSN129 3/16" ..................... $1.59 

KSN130 7/32" ..................... $1.69 

KSN131 1/4" ....................... $1.89 

KSN132 9/32" ..................... $2.19 

KSN133 5/16" ..................... $2.29 

KSN134 11/32" ................... $2.49 

KSN135 3/8" ...................... $2.59 

A 

B 

METRIC NUTS AND BOLTS 

J 

Slotted Countersunk 

Machine Screws 

Packed 10 Screws 

per bag ... $1.49 

Metric Hex Nuts Packed 

10 Nuts per bag ..... $1.49 

Metric Socket Head Grub 

ScrewsPacked 10 Screws 

per bag ............ $2.99 

Metric Socket Bolts 

Packed 10 Bolts 

per bag ........... $3.49 

HLRE715 M3x25 

Metric Blind Nuts Packed 10 Nuts per bag ...................... $2.99 

HLRE720 M3 HLRE730 M4 

Metric Nylon ScrewsPacked 10 Screwsper bag ............... $2.99 


HLRE390 M2 

HLRE400 M2.5 

Metric Nyloc Ultra Mini. Hex Nut 

Packed 10 Nuts per bag ................ $5.99 

Metric Washers Packed 

10 Washers per bag .... $1.09 

C D E F 

K 

HLRE180 M2x4 

HLRE190 M2x8 

HLRE200 M2x10 

HLRE210 M2x16 

HLRE220 M2x20 

HLRE230 M2.5x6 

HLRE240 M2.5x8 

HLRE250 M2.5x10 

HLRE260 M2.5x16 

HLRE410 M3 

HLRE411 M4 

Metric Toothed Washers Packed 10 Washers per bag ..... $1.49 


L 

HLRE350 M2x16 

HLRE360 M2x20 

HLRE370 M2.5x16 

HLRE380 M3x16 

HLRE450 M2 

HLRE460 M2.5 

HLRE671 M3x3 

HLRE672 M4x4 

HLRE711 M3x5 

HLRE712 M3x10 

HLRE713 M3x16 

HLRE714 M3x20 

Music (Piano) Wire, 36" long 

KSN501 1/32"................ $ 0.59 

KSN502 3/64"................ $ 0.69 

KSN504 1/16"................ $ 0.99 

KSN505 5/64"................ $ 1.09 

KSN506 3/32"................ $ 1.49 

KSN507 1/8".................. $ 1.59 

KSN508 5/32"................ $ 1.89 

KSN509 3/16"................ $ 2.59 

KSN510 7/32" ............... $ 2.89 

KSN511 1/4" ................. $ 3.99 

Metric Nyloc Hex Nuts, Packed 10 nuts per bag ............... $2.29 


HLRE674 M3x20 

HLRE678 M4x40 

M 

HLRE270 M2.5x20 

HLRE280 M3x6 

HLRE290 M3x8 

HLRE300 M3x10 

HLRE310 M3x16 

HLRE320 M3x20 

HLRE330 M3x30 

HLRE340 M3x40 

G 

HLRE371 M3x6 

HLRE372 M3x8 

HLRE373 M3x10 

HLRE415 M2 

HLRE470 M3 

HLRE480 M4 

HLRE716 M4x10 

HLRE717 M4x16 

HLRE718 M4x20 

HLRE719 M4x25 

HLRE690 M5x50 

HLRE710 M6x50 

Balsa Wood 

Balsa Sheet Wood, 36" long 

WOO100 1/32 X 3 .......... $1.99 

WOO102 1/32 X 4 .......... $1.99 

WOO104 1/16 X 3 .......... $2.09 

WOO105 1/16 X 4 .......... $2.09 

WOO106 1/16 X 6 .......... $3.49 

WOO108 3/32 X 3 .......... $2.09 

WOO109 3/32 X 4 .......... $2.29 

WOO112 1/8 X 3 ............ $2.39 

WOO113 1/8 X 4 ............ $2.59 

WOO115 3/16 X 3 .......... $2.39 

WOO116 3/16 X 4 ........... $2.99 

WOO119 1/4 X 3 ............ $2.69 

WOO120 1/4 X 4 ............ $3.89 

WOO122 3/8 X 3 ............ $3.59 

WOO123 3/8 X 4 ............ $4.69 

Balsa Trailing Edges, 36” long 

WOO331 Sm. 3/16 X 3/4 ...... $1.39 

WOO332 Med. 1/4 X 1.......... $1.69 

WOO333 Lg. 5/16 X 1-1/4 .... $1.99 

Aircraft Plywood, 6 X 12" 

WOO381 1/32" ................... $3.29 

WOO382 1/16" ................... $3.29 

WOO383 3/32" ................... $4.49 

WOO384 1/8" ..................... $4.49 

WOO385 1/4" ..................... $3.69 

Hard Maple Pieces, 12” long 

WOO351 3/8 X 3/8 ............ $2.89 

WOO352 3/8 X 1/2 ............ $2.89 

WOO353 3/8 X 3/4 ............ $2.89 

WOO401 1/8" Sq. ............. $0.79 

WOO402 1/8 X 1/4 ............ $0.99 

WOO403 1/8 X 3/8 ............ $1.29 

WOO404 1/8 X 1/2 ............ $1.49 

WOO406 3/16 Sq. ............ $1.09 

Not just a balsa building 

board, but a Building 

Board “System”! 

Balsa Sticks, 36” long 

WOO201 1/16 Sq. .......... $0.29 

WOO202 1/16 X 1/8 ....... $0.39 

WOO203 1/16 X 1/4 ....... $0.39 

WOO208 1/8 Sq. ............ $0.29 

WOO209 1/8 X 1/4 ........ $0.59 

WOO210 1/8 X 1/2 .......... $0.79 

WOO211 3/16 Sq. .......... $0.49 

WOO212 3/16 X 1/2 ....... $0.89 

WOO213 1/4 Sq. ............ $0.69 

WOO214 1/4 X 1/2 ......... $0.99 

Balsa Leading Edges, 36” long 

WOO341 Sm. 1/2 X 3/8...... $1.59 

WOO342 Med. 3/4 X 5/8 .... $3.79 

WOO343 Lg. 1 X 3/4 ......... $3.29 

Aircraft Plywood, 12 X 24" 

WOO391 1/32" .................. $9.99 

WOO392 1/16" .................. $9.99 

WOO393 3/32" .............. $11.99 

WOO394 1/8" ................ $13.99 

Birch Dowels, 36” long 

WOO362 3/16" Dowel .... $0.89 

WOO363 1/4" Dowel ..... $0.89 

WOO364 3/8" Dowel ..... $1.49 

WOO365 5/16"Dowel .... $0.89 

WOO407 1/4 Sq. .......... $1.69 

WOO408 3/8 Sq. .......... $2.39 

Triangle Balsa Wood, 36" long 

WOO370 1/4” ............... $1.09 


“Unitized” Building Board ...... $44.99 

Pinning a structure to a balsa building board is the easiest way to build a 

model airplane. Pins will hold their place in balsa even at oblique angles 

and when the pins are removed the balsa wood closes the pin holes and is 

ready for the next project. If the board should warp you can moisten the 

concave side and the board will flatten. Each “unit” consists of a balsa 

wood building board which is 39” long, 9.8” wide, and 3/4” thick with a 1/4” 

slot cut into all four edges, plus 2 plywood joiner strips which are about 1/4” 

thick. Using the joiner strips you can connect a second unit to produce a 

building board which is either twice as wide or twice as long as a single 

unit. Or, you can connect 3 units, or 4 or as many as you want. You could 

pin a 13 foot long sailplane wing onto 4 end-joined building units. Printed 

on the balsa board is a precise grid pattern which is helpful for maintaining 

the alignment of constructed parts. 

You’ll wonder how 

you ever built 

models without 

this big, laminated 

balsa board! 

Spruce Sticks, 36” long 

Building Boards 


Laminated Balsa Building Board ..................... $44.99 

50” x 13” x 1” board made of laminated 1” thick balsa planks. This board is 

more useful for model building than any wing or fuselage jig because it is so 

easy to insert pins into it at any angle. And when the pins are removed the 

holes are “self-healing”. The board is, of course, a natural wood product. It 

can warp from moisture or humidity or because of being stored in a non-flat 

position. You can flatten it by moistening the concave side. Note: We have 

advertised here a board which is 50” x 13” x 1”. The board which you will be 

shipped is actually 53” x 13.8” x 1”. This extra size will allow you to plane off 

or cut off any edge dents which may have occurred during shipping. 


Best COMPLETE Pushrod 

System we’ve seen! 

HLFK0624 Kavan Complete Airplane Pushrod Set, 2 ............ $8.79 

Two 36” long complete pushrods that use tiny 1/32” music wire inside 

special slippery plastic tube, which is inside a larger plastic tube. The outside 

tube is only 1/8” diameter. Included are 4 very fine threaded couplers 

and two of these threaded couplers come already attached to the 

pushrod ends. Solder or crimp the other 2 threaded couplers to the inner 

pushrods and screw on the quality Kavan metal clevises (4 included.) 

Specialty Control Horns 

Precision turnbuckles 

HLFK3050 7/8” Brass Turnbuckles, pair ......................................... $8.89 

HLFK3052 2” Brass Turnbuckles, pair ........................................ $11.99 

Solid Brass Turnbuckles 


5/8” Turnbuckles, 10 ............................. $23.99 


1” Turnbuckles, 10 ................................. $28.99 

Protect your plane’s 

finish. These mount 

either with screws or 

by gluing the shafts 

into holes. 

RA1350 Mini Skids, 2 .......................................................................... $1.09 

RA1355 Large Skid .............................................................................. $1.09 

Minis are 1-1/4” long overall. Large skid is 2” long overall. 

Hinge Tape 

Foam Rubber Receiver Protection 

This foam protects your receiver 

RUF001 Foam Rubber, 

1/2x8x12" .......................................... $6.89 

A sheet of latex foam rubber -the best. Cut 

to size and wrap your receiver. Secure with 

rubber bands or masking tape. 


Odd control horns 

GR10119 Rudder Horns for V-Tails, pair ........................................ $4.89 

7/8" long horns that extend 110 (degrees) from the control surface instead 

of the usual 90 (degrees). 

GR1133 Elevator Horn for T-Tails .................................................. $4.69 

1-1/8" long horn used for elevators on T-Tail airplanes where the elevator 

pushrod runs vertically up inside or along the vertical fin. The long length 

reduces elevator throw in elevator-sensitive T-Tails. 

GR3668 Shaft-mount Aileron Horns, pair ...................................... $2.49 

Horn portion is about 5/8" long. Insert shaft through hole. Glue in place. 

Cut off the shaft. Scale appearance. 

Tape for control surface hinges. 

GR8694 Clear Hinge Tape, 32 feet ......................... $5.89 

3/4” wide. The particular plastic used is flexible, non-tearable, 

and ideally suited for control surface hinges. The adhesive adheres well to 

any smooth surface. Ideal for aileron hinges on sailplanes where they permit 

no airflow through the hinge line to spoil the intent of the airfoil. Can be 

used for all control surfaces. 

Hatch Latches 

Hatch Latch 

installs in single drilled hole 


Brass-Steel Hatch Latch ............. $3.99 

Spring loaded steel pin in a brass housing makes a perfect latch for cabins, 

cowls, etc. About an inch long. Installs simply into 3/16” hole. 

Strongest hatch latch is 

easiest to mount 

HLRE001 Best Hatch Latch ........ $4.99 

1-7/8” long overall. “Best” because the 

body is very strong plastic, and it is very 

easy to mount using 4 small screws. 

Tiny hatch latch 

GR426012 Smallest 

Hatch Latch ........................... $5.79 

1” x 3/8” x 3/16”. Plastic, glue in place 

with UHU glue or Stabilit Express. 

Unassembled. Weight about 2 grams. 

Ideal for Speed 400 airplanes. 

MJ2660 Lightweight 

Plastic Hatch Latch 

........................ $2.29 

5/16” wide, 7/8” long. 

The same latch that is 

in our P-51 and P-47. 

Glue it in place. 

Weighs less than 1/2 gram 

Rare Earth Magnets hold 

Canopies and Hatches Firm! 

Neodymium magnets are perfect for 

securing hatches. These are very strong 

and allow you to make a working hatch 

with no release mechanisms protruding 

outside of the model. Each package 

contains 4 neodymium disc magnets and 

4 flat washers. 

DMAG136 1/8” x 1/16” Neodymium Disc Magnets, 4 ............. $3.39 

DMAG127 1/8” x 1/8” Neodymium Disc Magnets, 4 .............. $3.39 

DMAG308 3/16” x 1/16” Neodymium Disc Magnets, 4 .......... $3.39 

DMAG101 1/4” x 1/8” Neodymium Disc Magnets, 4 .............. $3.39 

DMAG248 3/8” x 1/16” Neodymium Disc Magnets, 4 ............ $3.39 

Airplane Storage 

A secure way to 

store any size 

model airplane 

Use the Wall Hanger for 

storing fuselages (with 

or without the wings). 

The Ceiling Hangers 

store airplanes with the 

wing attached. The dimension 

given is 

approximate and is the length of the horizontal bars. The vertical portion 

is about the same length. Hangers are made of 1/4” diameter 

steel with foam sleeves so they won’t dent balsa. The best recommendation 

we can give them is that we store all of our airplanes on 

them. 

BIG007 Wall Hanger 7” ............................................................ $24.99 

BIG013 Ceiling Hanger 13” ..................................................... $24.99 




100 

It's always bothered us to have to pay a high price for an individually packaged 

hardware part. It's no fault of the manufacturer that the packaging costs him 

more money than the part itself. But you don't have to pay for that packaging 

with our bulk packs. You'll also find that it's very handy having an adequate supply 

of parts hanging on your workshop wall. This beats running out of parts 

Clevises, Keepers 

25 "Better" 

RC Metal 

Clevises 

HLH803 

$9.99 

These metal clevises are unique in the RC hobby 

because they are solderable and threaded. They 

have the regular 2-56 threads that fits the standard 

threaded rods. These clevises are plated for easy 

soldering to a metal rod or to our Flex Cable Pushrod. 

They come also in pack of 2 clevises. 

HLH503 Better Metal Clevises, 2 ............ $ 1.00 

HLH817 10 “Better” 

4-40 Metal Clevis, ............................. $5.99 

Same solderable metal clevis as in HLH818, 

without the rods. 

Bulk 

"Better" 

18 RC 

Metal Clevises with 11" Rods 

HLH804 ... $7.99 

These are the same clevises as our HLH803. 

Included are 11" rods that are threaded at one 

end. The threaded end can be cut off and 

screwed into our nylon pushrod (HLH808). 

HLH804R 11" Threaded Rods only, 36 rods ... $3.99 

HLH508 Metal Clevis & 11” Rod, 1 ea. ........... $ .0.79 

HLH504 11” Rod, 3/4” Thread, 2-56, 1 ea. ...... $ .0.29 

10 

"Better" 

4-40 

Metal Clevises w/8" Rods 

HLH818 ... $10.99 

Included are 8" rods that are threaded at one end. 

The thread is cut with a die not rolled. 

25 Mini 

Nylon 

Pop 

Clevises 

with 11" Rods 

HLH811 ........ $6.99 

Same rod as in HLH804. 

35 Mini Nylon 

Pop Clevises 

HLH812 

$7.99 

These small clevises are very strong. They have 

a ball on the clevis pin that snaps into place when 

the clevis is closed. Very secure. 

HLH526 Mini Nylon Pop Clevis, 2 ...................... $0.59 

30 "Better" 

Swing Keepers 

HLH832 

$5.99 

"Better" for 3 reasons: 

(1) Longer legs permit more servo output rotation 

without binding the pushrod; (2) heavier construction 

than their two competitors; (3) these are made 

in "rights" and "lefts" for easier installation next to 

a fuselage sidewall. 

HLH529 Swing Keepers, 4 .................................... $ 0.99 

Bulk Hardware 

Huge savings compared to what you have to pay for individually packed hardware items! 

10 Threaded 

Ball Links 

HLH813 

$9.99 

Ball Links 

Excellent connectors 

on top of servo wheels to pushrod, throttle 

arm connection to pushrod, aileron servos. 

These ball links are the fourth type we've had 

and mate more precisely. 

HLH528 Threaded Ball Link, 1 ......................... $1.39 

10 Larger 

Threaded 

Ball Links 

HLH842 

$6.99 

Larger than our HLH813. The nylon socket part 

is just under 7/8" long. The threaded portion of 

the stud is 3/8" long. The threaded stud is .085" 

dia. -- a little less than 3/32". HLH813 (the 

smaller Threaded Ball Links) are satisfactory for 

most RC uses. These are good where you 

need even more strength. 

Pushrod Connectors 

15 Pushrod 

Connectors 

HLH819 

$11.99 

1/4” high barrel, 7/16” 

overall. Is held on to servo output wheels with 

secure star lock. Large round barrel can be 

held easily with pliers during installation and 

adjustment. Control rod is held securely in 

place with a socket set screw allowing a lower 

profile. Includes a hex wrench. 

HLH502 Pushrod Connector, Pk of 2 - $1.59 

Bulk Package 

30 Starlocks 

HLH820$3.99 for Bulk 

Pushrod Connectors 

The starlock on our HLH819 secures the Pushrod 

Connector so permanently to a servo output wheel 

that you must destroy the Starlock to remove the 

Pushrod Connector. The safety of our Pushrod 

Connector is terrific, but you needed a source for 

Starlocks so you can reinstall the Connectors. 

when you're trying to build a plane Sunday night. Quality The parts we're selling 

are our best shot at providing the best parts we can find. In fact, we've consistently 

upgraded many of these parts without ever advertising that fact. 

920 Feet 

Flex Cable 

Pushrod 

HLH805 

$7.99 

20 feet of Nylon outer tubing and 20 feet of 1/16" 

diameter bronzed cable. The cable used here is 

very good and very expensive for us to buy. It is 

bronzed for easy soldering, the ends don't "friz" 

when cut and the fit inside the nylon outer tube and 

into threaded coupler HLH809 is perfect. These 

are excellent for throttle pushrods and when used 

for other controls such as aileron, steerable nose 

gear, rudder, elevator will give a more precise control 

than all nylon pushrods. 

Threaded Couplers, 

Threaded Studs 

15 Threaded 

Couplers 

HLH809 

$4.99 

Greater strength in the threads: Machined 

nickle-plated steel with one end threaded 2-56 

to accept either metal clevis HLH803 or nylon 

clevis HLH812. The other end is a hollow tube 

that accepts the cable pushrod (HLH805) perfectly. 

HLH527 Threaded Couplers, 2 ..................... $ 0.89 

Threaded 

Studs, 20 

SUL498 

$2.59 

1" long, threaded full length with 2-56 threads. 

Threads into the end of the small Nylon Pushrod 

Tube (the moving portion of HLH808 Nylon Tube 

Pushrod) so that clevises can be scfrewed onto 

the ends. Metal Clevises HLH803 or Mini Nylon 

Pop Clevises HLH812 screw onto these. 

Nuts, Bolts, Blind Nuts 

50 -- 4-40 & 

6-32 

Bolts & Nuts 

HLH843 

$6.99 

25, 4-40x1-1/4” bolts, 25, 6-32x1-1/4” bolts, 

plus hex nuts, flat washers and lock washers to 

fit. 50 bolt-nut-washer sets (200 pieces) in the 

Bulk pack - Twelve times the usual 4-set quantity 

you buy! 

40 Blind Nuts 

$6.99 

HLH848 4-40 Blind Nuts 

HLH849 6-32 Blind Nuts 

High quality plated blind nuts at half the cost of the 

small packages of blind nuts. Order HLH843 if 

you need bolts and washers for the blind nuts. 

HLH548 4-40 Blind Nuts, 4 .................................... $ 0.89 

HLH549 6-32 Blind Nuts, 4 .................................... $ 0.89 

Flex Cable and Nylon Tube Pushrods 


25 Feet 

Nylon Tube 

Pushrod 

HLH808 

$9.99 

The inner tube accepts 2-56 threaded rod firmly. 

Screw Threaded Studs HLH845 into the 

small nylon tubing. Either a metal or nylon clevis 

can be screwed onto the threaded rod giving 

you an adjustable control rod. 

The fit between the inner and outer nylon tube 

is critical to accurate and free-moving control in 

this type of pushrod. We test each batch of 

tubing for this critical fit before packaging.

Control Horns, Hinges 

24 

Control 

Horns 

HLH801 

$9.99 

2 sizes: 1" and 3/4" tall. Both have nut plate. 

Screws are included. 

HLH801SC #2 Screws as in HLH801, 10 ..$ 0.79 

30 Regular 

Nylon Pin 

Hinges 

HLH830 

$5.99 

Overall size is 5/8" x 1-1/8". These are the 

"standard" hinge for 90% of RC use. 

HLH510 Reg. Nylon Pin Hinges, 6 ................. $2.29 

HLH512 Reg. Nylon Pin Hinges, 15 ............... $3.39 

100 Fast 

'n E-Z 

Hinges 

HLH847 

$11.99 

Insert hinge in slit. Use with CA glue. 

HLH547 10 Fast 'n E-Z Hinges 

$0.99 

Wing Fasteners 

20 Wing 

Fasteners 

HLH806 

$7.99 

The threaded block 

is easily epoxied or 

white-glued into the 

fuselage. Also very useful (and strong) for mounting 

struts. Bolts, 1-1/2" long. Blocks 3/4"x1". 

Nylon Metric blind nuts for wing 

attachment 

HLMO4545 

M4 Press-In 

Ny-Nuts, 

10 pcs - $3.39 

HLMO4538 M5 Press-In Ny-Nuts, 10 pcs .. $3.39 

HLMO4537 M6 Press-In Ny-Nuts,10 pcs .. $3.39 

Bulk Hardware 

Fuel Line, Fuel Filters 

5 Fuel Filters 

HLH807 $5.99 

These are 2 piece machined aluminum filters. 

The body can be unscrewed so the filter can be 

cleaned. 

HLH507 Fuel Filter, 1 ...................................... $1.99 

Wheels, Wheel Collars 

8 Aircraft Wheels 

HLH810 ..... $19.99 

1 pair each of 2-1/4", 2-1/2", 2-3/4", & 3" 

Wheels. 

These are the same wheels as HLH42225 

through HLH42300. 

Wheel 

Collars 

8 Feet 

Silicone Fuel Line 

HLH838 $4.99 

Resists breakage and deterioration from exposure 

to fuels and sunlight. 

FUE004 1 Foot Silicone Fuel Line ... $ 1.09 

Modelers’ Clamps, 

Cable Ties, Spinners 

10 

Modelers 

Clamps 

HLH827 .................................... $10.99 

5 large clamps and 5 small clamps. 

When you need modeler's clamps you need 

lots of them! There is nothing handier for fuselage 

assembly than these clamps. Notice 

the little square slide on the "handle" -- this 

makes the clamp sit level on a table when 

you're clamping together fuselage sides. 

6 Spinners 

HLH828 ..................................... $9.99 

One of each size: 1- 

1/2", 1-3/4", 2", 2- 

1/4", 2-1/2", 2-3/4". 

Assorted bright colors. 

These are the 

second version we 

have had. These are 

very deluxe as far as 

the accuracy of 

molding, fit of the cap 

and overall appearance. No back up plate is 

necessary, the aft portion of the spinner fits 

over the prop and the front cone is attached by 

2 screws. 

(See HLHS150 - HLHS275 “Spinners”) 

Machined Hardwood 

Struts 

Much cheaper short pieces 

(19”) of the Machined 

Hardwood Struts! 

Fiberglass 

Tape 

HLH851 

$5.99 

15 feet long, 3" 

wide 

Fiberglass Tape 

HLH551 Fiberglass Tape, 3” x 60” ............... $2.49 

Please SPECIFY Stock Number: 

HLH835 1/8" Collar, 20 .............................. $11.99 

HLH836 5/32" Collar, 20 ............................ $8.99 

Small Packs - $2.39 each: 

HLH543 1/8” Collar, 4 

HLH544 5/32” Collar, 4 

The Wheel Collars are bright nickel plated 

brass with smooth flat sides and edges slightly 

chamfered for a burr free, no interference fit. 

These are cut by machine into very smooth surfaced 

airfoil shapes. The hardwood is either linden 

or lemonwood. Length of each strut is a little 

over 19”. The chord-width of the three sizes 

in inches are: 3/8”, 9/16”, 1-1/16” respectively. 

These are hardwood and can be used for structural 

purposes whereas the standard airfoil 

shaped hollow aluminum tubing types of struts 

needs internal bracing. 

HLWK4420 4x10x500mm, pair ............... $3.69 

HLWK4421 5x12x500mm, pair ............... $4.69 

HLWK4422 8x25x500mm, pair ............... $6.69 


Sailplane Hi-Starts 

The world’s finest pure 

latex HI-START rubber 

tubing, in 100 FOOT 

un-spliced lengths! 

Hi-Starts are huge gentle 

“slingshots” for putting a 

glider into the air. I use 

the word “gentle” 

because you and I both 

can picture that a Hi-Start 

might actually put your 

glider into orbit. Have no fears — a Hi-Start launch is a very graceful procedure 

that is a delight to watch (and more fun to DO). 

These are 100 foot UNSPLICED tubes of latex rubber. They make the best 

possible “Hi-Starts” for RC sail planes because they can be stretched 5 to 7 

times their own length. The tubes are colored not only for better visibility 

when they are laying on the ground, but also because the color dies give the 

rubber protection from ultraviolet radiation and ozone. In addition to the color 

dies the tubing also has a small amount of a microcrystaline wax in it. This 

wax migrates to the surface of the tubing appearing as a whitish dust. The 

purpose of this wax is to provide further protection against ultraviolet rays. 

When not in use these Hi-Starts should be stored in a brown paper bag or 

box. A waxed bag or box is even better. Storing them this way should ensure 

years of excellent performance from your Hi-Starts. 

HIS002 100 Foot Hi-Start Rubber for 

under 2-meter (78") Sailplanes ................................................. $53.99 

3/16" ID with 1/16" wall thickness. Cross-section area is .0491 sq. inches. 

Color: Red, Weight: 2 pounds. 


under 3 meter (118") Sailplanes ............................................... $77.99 


Color: Orange. Weight 4.5 pounds. 


under 4 meter (157") Sailplanes ............................................. $128.99 


Color: Yellow. Weight 8 pounds. 

Custom made aluminum 

joiners fit our Hi-Starts! 

VA002 Hi-Start Joiner for HIS002 .... $8.79 

Fits our HIS002 Hi-Start rubber, 3/16” ID with 

1/16” wall thickness. 

VA003 Hi-Start Joiner for HIS003 .......................................... $12.69 

Fits our HIS003 Hi-Start rubber, 1/4” ID with 3/32” wall thickness. 

Handlaunches gliders 

HLH724 Complete UP-Start Outfit for 

HandlaunchGliders ................ $19.99 

Easier than throwing a handlaunched 

RC sailplane. This is a short hi-start — 

you don’t have to walk far to retrieve 

the launch line. Just drive the peg into 

the ground, hook the ring to the glider 

towhook, walk back until you have 

enough tension and then release the sailplane either from on the 

ground or from standup height. This is lighter latex tubing than our 

smallest Hi-Start HIS002 and shorter length. Gives equivalent of your 

best possible hand throw of RC gliders up to 60” span and up to 16 oz. 

flying weight. Includes 25 ft. latex hi start tubing, roll of fluorescent 

nylon line, tent peg, ring, instructions. 

GR569 Spare Ring for UP-Start ................................................ $0.69 

Universal Mounting 

Glider Towhook 

GR627 Glider Towhook ................................. $4.49 

For any glider to 150" wingspan. 2" x 7/16" x 5/16". 

Made of strong glass-filled nylon. 

This towhook will not break 

during launch. It’s guaranteed! 

HLFK219 Kavan Hardened Steel 

Towhook ................................................ $5.89 

1” long. Made of 5/32” steel rod. Kavan guarantees 

this towhook not to break. If it does, they 

will replace it. Adjustable to any fuselage thickness. 

Sailplane Accessories 

Connect your ailerons and flaps when you slide on 

your wings 

Each package comes with 2 connectors, 2 

housings, and screws for mounting and 

heat shrink to protect your electrical connections. 

Ideal for use in airplanes and 

gliders with slip-on wings. With these you 

can connect both the flap and aileron servo 

in a wing panel with one plug. This only 

requires 4 wires rather than the usual 6. One positive and one negative 

power wire supply both servos in the wing while each servo has a separate 

signal wire. Greatly decreases the amount of wire clutter in your 

airplane and the chance of incorrectly connecting your servos at the 

flying field. The metal pins, not the housing, identify the male connector. 

Soldering required. 

GR2972 Graupner "Quick-Fix" Wing Plug-in Servo Connector, 

Male, 2 ....................................................................................... $12.99 

GR2973 Graupner "Quick-Fix" Wing Plug-in Servo Connector, 

Female, 2 .................................................................................. $10.99 

Trouble free nose release for large 

scale gliders 

Machined of aluminum with brass tube and steel 

pin. Simple release mechanism that will work reliably 

every time. You must drill a 12mm hole in 

the nose of your sailplane and epoxy the release 

inside the nose. An 8" long 2.5mm pushrod 

extends back to your release servo (Standard 

servo required). 

GR2890 Graupner Aero-Tow Nose Release ........................ $24.99 

Two sizes: Postive action Glider 

nose towline release devices 

Two sizes: 1.5 and 2.0” long. Insert towline 

loop into latch. Operate with a small servo. 

Forward push releases. 

MAS002 1.5” Glider-nose Towline Release ….................. $9.99 

MAS003 2” Glider-nose Towline Release ….................. $13.99 

Complete tow release set for 

tow planes or gliders 

Two 9-7/8" long 2mm braided steel cables 

in plastic sheaths with solder-on metal clevises 

at the servo end and 3mm steel tube 

reinforcements on the tow release end. 

There are two sets of cables and release 

mechanisms, enough for both the tow plane and the sailplane being 

towed. Requires a servo to operate each release. 

GR1065 Graupner Aero-Tow Cable Set, 2 pcs. ........... $14.89 

KDH175 Glider Towline Parachute, #1175 ..... $24.99 

These chutes have a loop on the top of the canopy 

which engages the glider towhook. During launch the 

chute trails under the tension of the launch cord. When 

the glider is ready for release the cord slackens and the 

chute opens and drifts the launch cord back downwind 

to the launching point. 

Rip-stop Nylon Parachute, ready to install 

HLMO6310 

Deluxe Hi-Start 

Parachute ..... $22.89 

11” diameter, rip-stop 

nylon parachute, 

includes steel key ring 

at top of chute for 

attaching glider tow 

hook, larger steel ring 

pre-installed on guide 

strings for attachment to your winch or hi-start line. 

102 


Sailplane Accessories 

You can install mini and micro servos in thin wings, 

and REMOVE them with these servo FLAT 

MOUNTS! 

RA190 Servo Flat Mounts 

Mini, 2 pair .................... $3.29 

About 1" long and 1/2" high, 2 

pairs per pack with 4 screws 

and washers. Servo Flat 

Mounts allow the servo to lie 

with its side flat against the 

bottom so the servo installation will take up no more depth than the actual 

thickness of the servo itself. In a thin wing the aileron servos need to be 

mounted like this. Servos can sometimes be mounted by this method inside 

fins and horizontal stabs. You can shorten the vertical legs to the thickness 

of your servo. Insert a small screw and washer into the hole in the leg to 

clamp the servo in place. The screw can also hold the access plate or a fairing 

in place on top of the servo. Fits all “mini” and “micro” servos. 

Control exit cover or 

airscoop 

HLH550 Exit Cover/Airscoop, 2 

................................................ $3.39 

About 2" long. White plastic. Very easy to mount — glues onto surface. 

Good drag reducer. Reversed, it is an airscoop for electric flight. 

Long, aileron pushrod 

fairings 

HLAN9321 Aileron Pushrod 

Fairings, pair ................ $3.89 

These are drag-reducing fairings 

for the pushrods to any control surface — ailerons, elevator, flaps, 

rudder, speedbrakes, spoilers. The flat base of the pushrod fairing is 5" 

long overall. The forward part of the base is molded with a downward 

bend so it won’t pull up in the airplane’s slipstream. The fairing itself is 

about 3-3/4" long and 5/8" high. Cut off the aft end of the Fairing to 

make the Fairing any length you want. One is shown cut off in the photo. 

The Fairings are molded of ABS plastic which can be glued or screwed 

down over the servo’s output arm. 

These aileron pushrod fairings also 

cover the servo. 

GR4269/6 Graupner 

Aileron Servo Covers, 

Pair ........................... $11.99 

3" long. 2" wide, 3/4" high. 

Use part RA190 (Servo Flat 

Mounts) to mount the servos in the wings. You can bolt the Aileron 

Servo Covers onto part RA190. 

Easy to install wing servo system 

HT0098 Wing Mount 

“Can” for Micro Servos, 2 

.................................. $8.99 

Clean installation for small 

servos in a wing or tail. 

Allows easy access to the 

servo for adjustment or 

repair. Made for servos of 

similar size to Hitec’s HS- 

85BB. Included are adapters to fit Airtronics, JR , Futaba. 

Mount your servos right next to the flight control! 

RA200 Surface Mount System for 

Standard Size Servos, Pair .......... $8.69 

2-3/8” square white plastic plates with 

molded-in exit fairings. Fasten your servo 

to them. When you mount the plastic plate 

in place you have installed your servo. 

Standard size servos mount in the included 

servo mount. 

RA210 Surface Mounts for Mini Servos, Pair ........................... $8.69 

Same as RA200 but only 2" square. For mini servos up to 1-5/8" long 

(to ends of mounting tabs). 

Sailplane Spoilers 

Shallow spoilers fit into THIN 

sailplane wings. 

GR104625 

Graupner Thin Tall 

Spoilers, pair 

.................. $49.99 

9-7/8" long spoilers 

rise to double 

height but are less 

than 1/2" deep when collapsed. These fit into thin wings, have a down 

lock, actuate easily and are the best spoiler we’ve seen. 

Graupner “Teck” Spoilers. 

GR931 “Teck” 

Spoilers for 

3.5M Glider, 

pr ......... $52.99 

Length: 9.85", 

Width; 13/32". 

For any 2 to 

3.5M sailplane. Aluminum/plastic. 1.4 oz. 

GR932 “Teck” Spoilers for 5M Glider, pr ........................... $59.99 

Length; 14.58", Width; 13/32". For any 3.5 to 5M sailplane. 

Aluminum/plastic. 1.9 oz. 

Graupner’s hinge-style glider spoilers 

are less than 4mm thick. 

GR93 Thin Spoilers, 

pair ............ $24.99 

Each spoiler assembly 

is 10.7" overall, 

1.1" wide and 3.5mm 

thick for easy mounting 

in very thin glider 

wings. The size of 

these spoilers is sufficient for sailplanes of up to 10 foot wingspan. 

Complete hookup accessories and instructions are provided. 

GR63 Control Surface Gap Tape, 

16 feet .................................. $38.99 

13/16” wide, 0.2mm thick, half of it 

sticks to airfoil surface. The thicker, 

non-stick portion stays pressed 

against the control surface and covers 

the control surface gap. 

Control surface Gap cover 

We’re open 24/7 at 



Low-Temperature 

POLYCOVER 

This excellent product was formerly known as Low temperature 

Oracover. We are changing the name to Low Temperature Polycover. 

For years we assumed that the ready-built and ready-covered airplanes 

that we were getting from Germany, Czech Republic and other 

European countries were covered with regular Polycover. But when 

we compared the covering on these airplanes — particularly the lighter 

weight airplanes — to the Polycover that we stocked we discovered 

that the coverings were different. The planes were covered with a 

lighter-weight plastic film than the Polycover that we stocked. 

Low-Temperature Polycover is made of polyester instead of polypropylene 

plastic. It is less rubbery than poly coverings and is stronger. It 

comes with instructions for its application. If you will follow these 

instructions you will have a covering job that will not sag, will not have 

trapped air bubbles, and which will greatly increase the strength of 

your model airplane. 

Our NEW Low-Temperature Polycover solid colors weigh from 1.8 oz. 

to 2.4 oz. per square yard. Our NEW Low-Temperature Transparent 

Polycover weighs about 1.4 oz. per square yard. 

Low-temperature Polycover comes in 

26” wide, 78” long rolls. 

HLC200 

Low-Temp Polycover 

WHITE…$16.89 

HLC201 


LEMON YELLOW...$16.89 

HLC203 


CUB YELLOW…$16.89 

HLC207 


DARK GREEN…$16.89 

HLC208 


LIGHT BLUE…$16.89 

HLC209 


BLUE…$16.89 

HLC213 

Low-Temp Polycover Transparent 

LIGHTWEIGHT YELLOW … $16.89 

HLC214 


LIGHTWEIGHT RED … $16.89 

HLC215 


LIGHTWEIGHT BLUE … $16.89 

HLC204 


LIGHT ORANGE...$16.89 

HLC205 


RED…$16.89 

HLC206 


GREY…$16.89 

HLC210 


DARK BLUE…$16.89 

HLC211 


BLACK…$16.89 

HLC212 


ALUMINUM…$16.89 

Metalflake and Fluorescent Polycover 

HLC218 


Metalflake Red…$19.99 

HLC219 


Metalflake Blue…$19.99 

HLC220 


Fluorescent Yellow…$21.49 

104 

The name changes 

but the product remains the same: 

HLC221 


Fluorescent Red…$21.49 

HLC222 


Fluorescent Green…$21.49 

HLC223 


Fluorescent Orange…$21.49 

HLC224 


Fluorescent Pink…$21.49 

Lightweight Transparent Polycover 

HLC216 


LIGHTWEIGHT ORANGE … $16.89 

HLC217 


LIGHTWEIGHT DARK RED .. $16.89 

Covering Material 

Superfabric: easily applied, this incredibly strong 

covering may improve your plane's flight! 

Superfabric is a woven fabric iron-on heat-shrink model covering material that 

has a strong adhesive to bond it to the model. The colors are slightly transparent. 

Each roll is 26" wide and 6-1/2 feet long. 

Superfabric has some highly desirable characteristics: 

1. It is very easy to apply because it keeps shrinking while you apply heat 

from your iron or heat gun so that every wrinkle disappears. 

2. Once in place it is extremely strong and puncture resistant, and greatly increases 

the strength of your airplane's structure. 

3. It has a scale weave for scale models of fabric covered aircraft. 

4. Superfabric should be considered for covering the wings of high speed 

model airplanes. The texture of its weave promotes good boundary layer airflow 

and lower drag than smooth coverings. 

5. Superfabric is light. A square yard of Old Timer color weighed 2.715 

ounces. Manufacturer says 3.5 oz./sq. yd. 

Hobby Lobby SUPERFABRIC, 78" x 26" roll ........................... $24.49 

HLC501 Superfabric, White 

HLC502 Superfabric, Yellow 

HLC503 Superfabric, Red 

HLC504 Superfabric, Orange 

HLC505 Superfabric, Blue 

HLC506 Superfabric, Old Timer (Buff) 

HLC507 Superfabric, Dark Blue 

HLC508 Superfabric, Vintage Orange 

Superkote: the brightest colors in plastic 

covering material 

Superkote is a plastic, iron-on, heat-shrink model covering material that 

adheres and shrinks at low temperatures. 26” wide, 6 foot long rolls. 

Superkote shrinks tremendously under heat so that wrinkles are easily 

shrunk to non-existence. Superkote adheres to itself very well so that overlapping 

joints are permanent and nearly invisible. It’s easy to repair in 

case of punctures. You apply it with low heat so that it can be applied without 

heat damage to underlying foam structures. 

Hobby Lobby SUPERKOTE, 26" wide, 6' roll ........ $14.49 

HLC601 Cessna White HLC613 Metallic Blue 

HLC602 Beechcraft Red HLC614 Metallic Green 

HLC603 Piper Yellow (Lt.) HLC615 Violet 

HLC604 Waco Blue (med.) HLC616 Champion Yellow (Dk.) 

HLC605 Ryan Orange (Lt.) HLC618 Dark Red 

HLC606 Lux Blue (Lt.) HLC620 Dark Blue 

HLC607 Metallic Gold 

HLC630 Trans. Yellow 

HLC608 U.S.A.F. Aluminum HLC632 Trans. Red 

HLC609 Midnight Black HLC633 Trans. Blue 

HLC611 Terra Green (Lt.) HLC642 Trans. Green 

“Litespan”: the lightest covering material! 

Hobby Lobby “Litespan”, 36” x 20” sheet ....................... $7.39 

HLC401 White HLC404 Red 

HLC407 Black 

HLC402 Yellow HLC405 Blue HLC408 Buff 

HLC403 Orange HLC406 Dk. Green HLC409 Silver 

HLC411 White 72” x 20” sheet Litespan .............................. $12.99 

HLC400 Balsaloc Adhesive for Litespan, 3.7oz. jar ............ $9.89 

Litespan is a very light, strong, airtight, waterproof model covering material 

made of interwelded polyester fibers. The colors yellow, orange, red, and blue 

are only 28 to 30 grams per sq. Yard — under 1 oz. Per sq. Yard. The remaining 

colors are more opaque and are 32 to 35 grams per sq. Meter — 

about 1 oz. Per sq. Yard. Litespan has no adhesive so Balsaloc must be 

applied to the airplane structure before ironing on the Litespan. From then on 

Litespan is shrunk in place like the plastic film materials. 


Pro Boats 

NEW! The perfect boat for extreme speed but no nitro hassle 

PRB3300 Blackjack 26 Brushless Catamaran 

RTR ....................................................... $299.99 

With incredible styling and high-performance handling 

known to the Pro Boat brand, the Blackjack 

26 Brushless is the perfect boat if you want 

extreme speed but don’t want to hassle with nitro. 

Like all other Pro Boat models, the Blackjack 26 

Brushless EP RTR is completely ready to run. It 

comes with a programmable ESC for fast, reliable 

and convenient performance. The steerable drive 

system increases the superior handling and low 

maintenance of the Blackjack 26 Brushless EP 

RTR. An installed Pro Boat pistol-grip AM radio 

and a high-quality, painted fiberglass hull add to 

the great looks, reliability and high-performance 

of the new Pro Boat Blackjack 26 Brushless EP 

RTR. 

Included: brushless electric technology for fast, 

reliable performance, water-cooled A3630-1500 

brushless motor and ESC keep electronics cool, 

steerable drive system for superior handling, 

high-quality, pre-painted fiberglass composite 

catamaran hull, Pro Boat 2-channel AM 27 MHz 

pistol-grip radio system installed, magnetic hatch 

and quick access radio box helps keep electronics 

dry, programmable ESC allows you to customize 

settings and use LiPo batteries. 

Additional Items Needed: 

Two - PRB3313 7.2V 3600 mAh NiMH with Deans Ultra @ $54.99 ea. .. $109.98 

DYN4033 Twin Peak AC/DC Dual Peak Charger .. $69.99 

Two - PRB3312 Tamiya / Deans Ultra Charge Adapter @ $2.99 ea. .. $5.98 

Two - BATAA Pack of 4 AA Batteries @ $3.50 ea. .. $7.00 

Specs: 

Length: 26-7/8” (660mm) 

Beam: 8-3/8” (210mm) 

Motor Size: A3630-1500 water-cooled brushless 

Radio: Pro Boat 2-channel AM 27MHz 

Speed Control: Water-cooled 45A programmable brushless 

Hull Material: Fiberglass composite 

Battery: 2-7.2V sub-C packs with Deans connectors 

(required to complete) 

NEW! Steerable drive system offers better speed and handling 

PRB3400 Apache Catamaran EP RTR RC Boat 

.................................................................. $159.99 

The Pro Boat Apache 24 RTR features a highperformance, 

water-cooled 550 motor that’s engineered 

to provide plenty of power and torque for 

long, full-throttle runs. Its durable catamarn hull 

and steerable drive system allow the Apache 24 

to cut turns at top speed and still handle beautifully. 

Included: water-cooled motor lowers running 

temperatures for increased motor life, steerable 

drive system offers better speed and handling, 

electronic speed control with reverse, Pro Boat 2- 

channel AM pistol-grip radio system, magnetic 

hatch keeps electronics dry, catamaran hull provides 

stable handling in rough waters. 


DYN1185 7.2V 3300 NiMH Flat Pack w/Tamiya Conn. .. $29.99 

DYN4056 Prophet Sport AC/DC Peak Charger ............. $29.99 

Two - BATAA Pack of 4 AA Batteries @ $3.50 ea. ......... $7.00 

Specs: 

Length: 24” (609mm) 

Beam: 8.3” (210mm) 

Motor Size: 550-size 

Radio: Pro Boat 2-channel pistol-grip AM 27 MHz (installed) 

Speed Control: Waterproof Electronic with Reverse 

Hull Material: ABS Plastic 

Drive System: Steerable Direct Drive System 


Boats 

NEW! Slingshot acceleration and turn-on-a-dime maneuverability 

HBZ3700 Zig Zag Racer 3 RTR, Silver ........................................................... $79.99 

HBZ3705 Zig Zag Racer 3 RTR, Red .............................................................. $79.99 

HBZ3710 Zig Zag Racer 3 RTR, Blue .............................................................. $79.99 

Race against the clock as you slash and dash through a slalom course or take on up to 

five other Zig Zag Racers in a waterborne grand prix. This updated version of the popular 

Zig Zag Racer has an improved fully proportional pistol-grip ZX10 radio that provides more 

precise and natural steering. The paint scheme and canopy graphics have also been 

updated for a new, sharp look. Included with every boat are three self-anchoring buoys, so 

you can create the Zig Zag racecourse of your dreams. 

Included: Ready-to-Run, one-box purchase, 6-cell 1000 mAh NiMH battery pack included, 

DC peak charger safely charges 4 - 7 cell battery packs in 30 minutes, self-righting hull to 

prevent capsizing, sealed radio box protects radio components, soccer bumper and balls 

included. Three colors to choose from so you can race boats simultaneously. 

NEW! Race boat with steerable drive system 

PRB3100 ShockWave 26 RS EP 

RTR RC Boat ................ $159.99 

The Pro Boat ShockWave 26 RS 

EP RTR features a new high-performance, 

water-cooled 550 motor 

that’s engineered to provide plenty 

of power and torque for long, fullthrottle 

runs. Its durable deep-V 

hull and steerable drive system 

allow the ShockWave 26 RS to cut 

turns at top speed and still handle 

beautifully. There’s no question 

that boating aficionados will be in 

a hurry to add this Pro Boat beauty 

to their fleet. 

Includes: powerful, water-cooled 

550 motor, durable and lightweight 

deep-V hull, waterproof electronic 

speed control with reverse, steerable 

prop drive system for 

improved handling, Pro Boat 2- 

channel 27 MHz AM pistol-grip 

radio installed, magnetic hatch 

mounting system, custom boat 

stand included. 


DYN1185 7.2V 3300 NiMH Flat with Tamiya .. $29.99 

DYN4056 Prophet Sport AC/DC Peak Charger .. $29.99 

Two - BATAA Pack of 4 AA Batteries @ $3.50 ea. .. $7.00 

Specs: 

Length: 26” (660mm) 

Beam: 7.5” (191mm) 

Motor Size: Water-cooled high-performance 550-size 

Radio: Pro Boat AM 27MHz pistol-grip 

Speed Control: Waterproof electronic with reverse 

Drive System: Steerable direct drive system 

106 


Submarine 

Micro RC submarine that you control 

GR2018 Graupner "U-16" Mini RC 

Submarine ....................................... $49.99 

5-1/8" long, 1-3/8" diameter, 1-7/8" tall, 

weighs 2.9 oz. Ready-to-run submarine for 

use in large aquariums, bathtubs or small 

swimming pools. Submarine has real static 

diving system with a motor controlled dive 

tank. Control the submarine's depth by 

adjusting how much water is in the dive tank 

using the "dive" and "surface" buttons. 

Thruster can turn the submarine even when it 

is not moving forward. The re-chargeable 

drive battery is included and installed in the 

submarine. Charging takes about 10 minutes. 

The charging socket doubles as the on/off 

switch. By closing the waterproof hatch the 

red and green LED’s light and the submarine 

is ready for use. Clear instructions are included. 

Maximum dive depth is about 20". Included: 

Charging and display station (6-C cells required) 2-stick 

transmitter (9V battery required). Controls are: (Left 

stick) forward & reverse, (Right stick) right & left, (Left 

button) dive control, (Right button) surface control. 

Packaged in 

attractive gift box 

Sailboats 

Semi-scale sailboat requires no painting - has ready-made components for quick building 

GR2057 Graupner "Trueblue" 

RC Sailboat Kit .......... $279.99 

39-1/3" long, 8-1/2" beam, 68" 

mast height, weighs 8-1/2 lbs., 565 

sq. in. sail area. Graupner Trueblue 

is a semi-scale 1:30 replica of a 

30-meter luxury sailing yacht. Kit 

contains ready-made components 

for quick assembly; no parts have 

to be trimmed or adjusted. A plastic 

fairing covers the lead keel ballast 

and protects it from damage. The 

mast is constructed of lightweight 

aluminum tubing. Made of injected 

molded plastic, so no painting is 

required. Two full size super torque 

servos are used in tandem for the 

sail winch giving you precise and 

immediate control of the sails. One 

full-size servo is used for the rudder. 

Controls are sail setting and 

rudder. Trueblue comes complete 

with tough rip-stop sails, epoxy 

glue and special glue for deck sealing. 

A decorative display stand is 

included. Requires 8-AA batteries 

for the transmitter and 4-AA batteries 

for the receiver. Illustrated 

instruction manual is well written 

and parts are labeled for easy 

assembly. Trueblue is suitable for 

an intermediate level sailor and 

recommended for light to moderate 

winds. 

Radio 

–––––––––––––––––––– 

HTR3175 Hitec Ranger 2Z 

with 2 HS-303 Servos 

................................. $49.99 

Two - HTS0645M Hitec HS-645MG "Super 

Torque" Servo @ $35.99 ea. ............ $71.98 

Battery ––––––––––––––––––– 

Three - BATAA Pack of 4 AA Batteries @ 

$3.50 ea. ......................................... $10.50 

Big, powerful sail winch for large sailboats 

HTS0785 Hitec Sail Winch Servo HS-785HB .... $49.99 

About 2-1/4" x 1-1/8" x 2", 3.9 oz. Huge power for big sails: Over 12 pounds of pull: 152. oz./in. torque! Use with 

sails up to 1000 sq. inches. Karbonite gears, ball bearing. 1-7/8" diameter 2-section drum, capable of 3 1/2 rotations. 

Each rotation can let out or take in 4-3/4" of line — over 16” of line movement! FAST — it turns one full rotation 

in 1.68 seconds. Has Hitec connector, which will fit most brands. 


Sailboats 

Smooth sailing RC sailboat 

GR2014 Graupner "Racing Micro Magic" ARF 

Sailboat .......................................................... $229.99 

GR2014C Graupner Racing Micro Magic “Carbon 

Look” Sailboat .............................................. $239.99 

21" overall length, 7" wide, 38-1/2" tall, ready to sail 

weight is 30 oz., 570 sq. in. sail area. The racing MICRO 

MAGIC has been developed to reflect progress in the 

MICRO MAGIC regatta scene. The basic lines of the 

original hull have been left unchanged in order to stay 

within the German class rules. The racing MICRO 

MAGIC includes extensive use of carbon fiber for the 

mast, mainsail boom and jib boom. An additional micro 

servo can be fitted to provide jib sheet trim control from 

the transmitter so that the jib sail trim can be fine-tuned 

while the boat is on the water (*note - a 3 channel radio 

is required for this). Comes with CNC-machined vacuum 

moulded hull, deck, fairing and two-part keel/mast socket, 

glass fiber reinforced plastic keel fin, rudder, rig fittings 

and small items, replacement keel ballast, laser-cut 

wooden internal parts and boat stand components. Sails 

are water-repellent, distortion-free plastic material. 

Photo-illustrated instructions included. RC functions: 

Rudder, Sail Setting and Jib Sheet Trim. 

Rudder uses pull-pull 

control for precise, noslop 

rudder control 


SPMR6600 Spektrum DX6i 2.4 Ghz 

Transmitter ............................ $149.99 

SPMMR3000 Spektrum Marine 

2.4GHz 3-Channel Receiver ... $79.99 

SPM9520 Spektrum 4.8V 1100mAh 

NiCd Receiver Pack ................ $24.99 

HTS225MG Hitec HS-225MG Metal 

Gear Servo .............................. $27.99 

HTS065 Hitec HS-65HB Servo 

................................................... $25.99 

GR9601 Stabilit Express Cement, 1 

oz. ............................................. $14.99 

GR9534 UHU-Hart ABS Glue, 1 oz. 

..................................................... $4.99 

Strong carbon 

fiber mast and 

distortion-free 

sails with 

adjustments 

for sail tension 

Spare Parts for Racing Micro Magic: 

GR2014C 

Variable-position keel allows fore 

and aft movement to suit sailing 

conditions 

GR20141 RMM Hull/Deck/Hatch ............................................... $49.99 

GR20142 RMM Keel Fin ............................................................ $16.99 

GR20143 RMM Rudder .............................................................. $10.99 

GR20144 RMM Keel Ballast ...................................................... $12.99 

GR20145 RMM Sail Set ............................................................. $57.99 

GR20147 RMM Standard Hatch .................................................. $6.99 

GR20147T RMM Transparent Hatch ......................................... $16.99 

GR2415 RMM Vang/Gooseneck Assembly .............................. $13.99 

GR2416 RMM Boom Clips ........................................................... $5.99 

GR2417 RMM Outhaul Sliders Jib/Main ..................................... $6.99 

GR2418 RMM Turning Blocks ..................................................... $5.99 

GR2419 RMM Masthead Crane & SW Arm ................................ $6.99 

GR2420 RMM Jib Boom End Fittings ......................................... $5.99 

GR2114 Graupner “Micro Magic” 

RC Sailboat Kit ............................ $189.99 

Exactly the right size for the most sailing use 

— one of the best boat kits we’ve ever seen! 

The price seemed high until we opened the kit. 

This is one of the best kits ever — very complete, 

very easy to assemble correctly, and 

obviously well designed for rough water sailing. 

Boat is small but the design is seaworthy. 

Best idea here is that this is a transportable 

sailboat that you will sail more often than larger, 

harder to transport boats: 21.8” long, 7” 

beam, 30” mast height, about 38” height from 

bottom of weighted keel to top of mast. Sails 

are ready made. All wood parts are die cut, hull 

is ABS, hardware is extremely complete. 

Radio ––––––––––––––––– 

HTR3175 Hitec Ranger 2Z, with 2 

HS-303 Servos ..................... $49.99 

WHAT OUR CUSTOMERS HAVE TO SAY 

“I had occasion to call Hobby-Lobby today regarding a backorder. I was very fortunate 

that Rachel answered the phone in customer service. 

This is just a note to let you know that Rachel is an OUTSTANDING, pleasant and 

helpful customer service representative. She took extra steps to resolve my problem 

and got my order shipped today. You are very lucky to have such a superb employee 

in exactly the correct position in your organization.” 

Sincerely, 

Bill W. 

108 


Sailboats 

Handcrafted Fiberglass Hull - Ready-to-Run 

NEW! An Innovative Introduction 

to the World of Sailing 

PRB2450 Pro Boat Endevor Sailboat EP RTR ........... $199.99 

The Pro Boat Endeavor Sailboat is the first and only sailboat 

within the Pro Boat lineup to offer the benefit of an electric 

backup motor in case of sudden wind loss. The boat comes 

completely ready-to-run including battery, charger and transmitter. 

The Endeavor’s compact design, RTR setup, and standard 

sail servo make this an excellent choice for the beginner RC 

enthusiast looking for an entry-level Sailboat that looks as good 

as it performs. 

Features: easily returns to shore thanks to electric power, 

ready-to-run with no assembly required, battery and charger 

included, compact design for easy transportation, standard sail 

servo offers a straightforward design. 

Specs: 

Length: 24 in. (609.6mm) 

Beam: 6.25 in. (158.75mm) 

Motor Size: 380-size 

Mast Height: 36.5 in. 

Radio: Pro Boat 2-Channel 27 MHz AM 

(preinstalled) 

Sail Area (Main): 170 sq. in. 

Sail Area (Jib): 94 sq. in. 

Sail Area (Overall): 264 sq. in. 

Additional Items 

Needed: 

Three - BATAA 

Pack of 4 AA 

Batteries @ $3.50 

ea. .............. $10.50 

PRB2400 Pro Boat Sanibel 36-600 RTR Sailboat .. $299.99 

36” long, 7.5” beam, 51.5” mast height, 521-1/2” sail area. 

The Sanibel offers an accurate and authentic scale look; a 

handcrafted fiberglass composite hull that maintains its 

toughness and attractive shine; Pro Boat’s comfortable 2- 

channel AM 27 MHz radio system and sail winch servo; a 

lightweight, water-resistant rip stop nylon sail; anodized aluminum 

2-piece mast and booms for easy transport and more. 

It’s a breeze for beginners too - the easy-to-read rigging 

instructions will have you sailing in less than two hours. 


Three - BATAA Pack of 4 AA Batteries @ $3.50 ea. .. $10.50 


GR2087 Graupner Ares 3 Scale R/C Harbor Tug Boat, ARTR 

.......................................................................................... $699.99 

Ready-made model, almost-ready-to-run (ARTR), GRP hull, 

Laser-cut ABS superstructure components, Metal and plastic 

details and small items, Rubber tire fenders and rubbing strake, 

Hull, decks and superstructure sprayed in semi-matte color paints, 

Decals already applied, Two propeller drive units in Kort nozzles, 

two pre-installed Speed 600 class electric motors, Stern pulley 

(non-functional), Simple installation of RC system components, 

Completely ready-made model with Boatstand and assembly 

instruction. 

The full-size vessel - A typical harbor tug, as encountered 

on all the world’s oceans and in every sea-port. The 

primary roles of these maritime workhorses are towing 

ships, maneuvering within harbors, and also working at 

offshore drilling platforms. The powerful winches on the 

forecastle deck can be used to secure and move barges, lighters 

and other loads. The stern pulley is also used for guiding the 

towing cable when raising loads from the bottom of the sea. 

BOATS 

This maritime workhorse is almost-ready-to-run 

The model - Ares 3 is a high-quality ship model, part of the 

Graupner Premium-Line series. The boat is extremely realistic 

thanks to its many details and scale fittings The generously sized 

deck openings make it a rapid, simple task to install the RC 

system components. To complete the model ready for the water, all 

the builder has to do is install the RC system components and drive 

battery, and carry out a few minor soldered joints. 


Radio System: 

HTR3175 Hitec Ranger 2N with 2 HS-303 Servos .... $49.99 

Two - BATAA Pack of 4 AA Batteries @ $3.50 ea. ...... $7.00 

Electric Accessories for Drive System: 

GR2875 Graupner Navy V40R Controller .... $119.99 

GR775 Graupner 6V/7Ah Battery ................... $22.99 

GR2989 Graupner G2 Connectors ................... $6.99 

GR3068 Graupner G2 Distribution Cable ...... $16.99 

Specs: 

Length: 24.8” (630 mm) 

Beam: 9” (230 mm) 

Height: 18.5” (470 mm) 

Weight: 11.25 lbs. (5.1 kg) 

Scale: 1:50 

Outstanding sea-worthy boat even in shallow water 

GR2139 Graupner SAR Search and Rescue R/C Boat Model 

................................................................................................. $164.99 

The full-size vessel - The new 9-meter sea rescue boat with Delta hull 

is one of a series of seven new full-scale vessels which have 

been developed on the basis of previous SAR units. The design of 

this new boat type incorporates the knowledge and experience of 

the rescue teams in the Search and Rescue (SAR) service. The 

main feature of this type of vessel is its outstanding sea-worthiness. 

In shallow waters, with heavy seas and breakers, the boat remains 

stable, maneuvers perfectly, survives serious grounding and is capable 

of running alongside other vessels even at fairly high speeds 

and indifficult conditions thanks to the shock-absorbing 

fender system running all around the hull. The model is drawn 

to a scale of 1:20, and has been developed with the help of 

documents from the DGzRS and the Fr. Schweers dockyard. 

The model - All the difficult to make parts are supplied as ABS plastic 

moldings: they include the hull, deck, superstructure and many other 

small parts. The hull, deck and superstructure are CNC-trimmed. Many 

injection-molded plastic parts are also provided, including bollards, 

aerials, blue light, lanterns and other components, and these all help to 

shorten the building time. The boat can be run with a basic set of RC 

equipment, but there is space for additional working systems at the 

builder’s discretion, including sound simulator, lighting system, etc. 

Contents of the quick-build kit - Quick-build plan including RC 

installation and building instructions in German, English and French. 

Vacuum-molded ABS plastic hull, deck, super-structure, roof, radar 

antenna, mast and other small parts, SPEED 400 7.2 V electric motor, 

shaft and stern tube, coupling, coupling housing, propeller, rudder, 

decal sheet and other small items. 

Specs: 

Length: 18.75” (476 mm) 

Beam: 7.2” (182 mm) 

Height: 12.6” (320 mm) 

Scale: 1:20 


Radio System: 

HTR3175 Hitec Ranger 2N with 2 HS-303 Servos ................... $49.99 

Two - BATAA Pack of 4 AA Batteries @ $3.50 ea. ..................... $7.00 

Electric Accessories for Drive System: 

GR2875 Graupner Navy V40R Controller ............................... $119.99 

Two - GR25966 Graupner 7.2V 3000mAh NiMH Pack @ $39.99 ea. 

.......................................................................................................$79.98 

GR3061 Graupner G2 Parallel Cable ........................................ $13.99 

GR3389 Graupner 2.5mm Wire, 78” ........................................... $8.99 

GR2989 Graupner G2 Connectors .............................................. $6.99 

GR3588 Graupner Capacitors ..................................................... $2.99 

110 


GR2071 Graupner Sydney Star Container Ship 

Model ........................................................ $359.99 

BOATS 

Large long-range container ship as seen on the world’s oceans 

Container ships such as the SYDNEY STAR are an 

increasingly common sight on the world’s oceans, 

as the use of standardized containers - they are 

identical the world over - makes it simple and fast to 

load and unload goods. For this reason virtually all 

goods are transported by container ship nowadays. 

For long-distance journeys (Asia - Europe - 

America) large container ships with vast transport 

capacity are employed, which can only 

be accommodated in particular ports. These 

ports are specially equipped for handling 

containers, and for this reason the ships require no 

loading bridge. The containers are then carried on 

the remainder of their journey by smaller container ships (coastal vessels), or by road and rail. 

The SYDNEY STAR is a semi-scale model of a long-range container ship. The model 

includes all the characteristic features and details of these vessels, as we wanted the ship 

to have as realistic an appearance as possible. Construction of the model is greatly simplified 

Specs: 

Length: 44.7” (1135 mm) 

Beam: 5.5” (140 mm) 

Scale: 1:200 

bythe high level of pre-fabrication of the kit’s components, many of them die-cut or CNC-machined, plus the many 

fittings included in the kit as standard, including winches, companionways and injection-molded handrails. Nevertheless, 

the model is only recommended for the experienced marine modeller. The two transverse thrusters at bow and stern allow the model to 

traverse (move sideways) and turn on the spot without difficulty, without the need for tugs. 

Contents of the quick-build kit: Quick-build plan, RC installation plan, illustrated assembly instructions including RC installation 

instructions in German, English and French. Vacuum-molded, CNC-trimmed ABS hull and deck components. Additional vacuum-molded 

ABS parts include bridge components, funnel, containers, loading hatches, lifeboats, breakwater, masts, rudders and other small 

items, printed and die-cut ABS and wooden parts, strip material, tubing, wire and rod, decal sheet, complete fittings set, propeller shaft, 

propeller, motor mount, shaft coupling, rudder system components, boatstand and other small items. 

Optional functions that can be installed: Bow thruster, stern thruster, and other auxiliary working systems such as rotating radar antenna 

can be installed at the builder’s discretion. 


Radio System: 

HTR5651 Hitec Laser 4 Surface w/ 2 HS-322 Servos ......... $113.99 

Drive System: 

GR1788 Graupner SPEED 500E 12V Motor ........................... $15.99 

GR2875 Graupner Navy V40R Controller ............................. $119.99 

Two - GR768 Graupner 6V/10Ah Batteries @ $29.99 ea. ...... $59.98 

GR3389 Graupner 2.5mm Wire, 78” ......................................... $8.99 

GR2989 Graupner G2 Connectors ................................................ $6.99 

GR3061 Graupner G2 Parallel Cable .......................................... $13.99 

GR3588 Graupner Capacitors ....................................................... $2.99 

Bow and Stern Thrusters: 

Two - GR1785 Graupner Bow/Stern Thrusters @ $38.99 ea. ... $77.98 

Two - GR2736 Graupner MICRO SPEED 10 Controller @ $88.99 ea. 

..................................................................................................... $177.98 

Two - GR3588 Graupner Capacitors @ $2.99 ea. ........................ $5.98 

GR2120 Graupner Anja SL 35 R/C Fishing Cutter Model ... $57.99 

Full-size fishing cutters of the North Sea are equipped with powerful 

combustion engines, while the mizzen-mast sail near the stern only 

serves to stabilize the cutter when running. Despite its small 

dimensions (1:60th scale) the model duplicates the full-size 

counterpart well. Thanks to its ready-formed hull molded of ABS 

plastic and the many injection-molded parts the model can be 

assembled in a short time, requiring little skill for its completion. 

Contents of the quick-build kit: Quickbuild plan with R/C installation, 

illustrated building instructions incl. R/C installation in German, plus 

Dutch, English and French. Molded hull and miscellaneous parts of 

ABS plastic, die-cut and printed wood parts, moldings, rigging yarn, 

dowels, glazing, rudder shaft, flag, decal, and miscellaneous plastic 

parts. 

North Sea RC Fishing Cutter model boat 


Radio System: 

HTR3175 Hitec Ranger 2N with 2 HS-303 Servos .... $49.99 

Two - BATAA Pack of 4 AA Batteries @ $3.50 ea. ...... $7.00 

Drive System: 

GR1147 Graupner MultiSpeed 140 Boat Drive .......... $29.99 

GR25964 Graupner 4.8V 3000mAh NiMH Pack ........ $27.99 

GR2735 Graupner Micro Speed 4 Controller ............ $33.99 

GR3588 Graupner Capacitors ...................................... $2.99 

GR2989 Graupner G2 Connectors ............................... $6.99 

HLA99041 20 Ga. Wire, 18” .......................................... $3.69 

Specs: 

Length: 14.1” (358 mm) 

Beam: 4.5” (114 mm) 

Weight: 23.3 oz. (660 g) 

Scale: 1:60 


SCALE SHIPS 

34” long freighter is a great scale ship project 

GR2144 Graupner “Neptune” Cargo Ship ......................................... $109.99 

Easy construction and prefabricated parts make this a great beginner’s boat project. 

Paint it with Krylon. Superstructure can be amidships or aft as on a container ship. 

Hull is preformed ABS, deck is plywood for realism, lifeboats, cranes are pre-fabbed 

plastic. Decals, propshaft, prop, rudder are included. Optional deck fitting kit and 

“container” kit are available separately. Length: 33.8”, width 5.6”, draft 2”, weight 

without RC, battery about 3 lbs. 

Radio –––––––––––––––––––––– 

HTR3175 Hitec Ranger 2Z, with 2 

HS-303 Servos ....................... $49.99 

Two - BATAA Pack of 4 AA Batteries 

@ $3.50 ea. ............................... $7.00 

Battery ––––––––––––––––––––– 

Two - GR793 Graupner 2V/4Ah Battery 

@ $14.99 ea. ............................. $29.98 

Motor / Controller 

GR6328 Speed 280 Motor, 6V ..... $6.99 

GR2736 Graupner MICRO SPEED 10 

Controller ................................... $88.99 

GR3389 Graupner 2.5mm Wire, 78” ........................ $8.99 

GR2974 Graupner FASTON Flat Connector ........... $7.99 

GR2977 Graupner Cable Set TG4 ............................ $6.99 

GR3588 Graupner Capacitors ................................. $2.99 

GR2989 Graupner G2 Connectors .......................... $6.99 

Optional Items: 

GR798 Detailed Deck Fittings for Neptune ....... $69.99 

GR799 Set of 10 “Containers” for Neptune ....... $23.99 

GR2144P Spare Propeller for Neptune ................. $4.69 

Drive Systems for Scale Ships 

Marine Gear Drive & Shafts 

Geardrive, motor, shaft, prop sold separately 

Universal Marine Gear Drive has adapters that 

accept any prop shaft that has an outside stern tube 

diameter of 6mm, 8mm, or 10mm. The drive 

accepts 1/8” output shaft motors (all Speed 500’s, 

600’s). Gear reductions are 2.5:1 or 2:1. The output gear accepts 4mm prop 

shafts. 

GR1114 Graupner Universal Marine Gear Drive 2.5:1.................. $21.99 

GR1115 Graupner Universal Marine Gear Drive 2:1..................... $21.99 

Graupner Prop Shafts to fit Universal Marine Gear Drives: 

GR1116 8.9” Prop Shaft, 6mm OD, 3 or 4mm shaft ................... $10.99 

GR1117 10.2” Prop Shaft, 6mm OD, 3 or 4mm shaft ................. $10.99 

GR1118 12.2” Prop Shaft, 6mm OD, 3 or 4mm shaft ................. $11.99 

GR1119 13.8” Prop Shaft, 8mm OD, 4mm shaft ......................... $17.99 

GR1981/1 Graupner Prop Shaft for GR2055 ................................. $10.99 

All of these fit the GR1114 and GR1115 Graupner Universal Gear Drives. All 

shafts have 4mm threads to fit the Graupner plastic props. All of these shafts 

have brass bushings as bearings at both ends. 

Motor-to-Shaft Universal 

Couplings 

GR354 3mm, 4mm to 3.2mm Universal Joint ......................... $12.99 

Connects 3 or 4mm shaft to a 3.2mm (1/8") shaft. 

GR355 2mm to 3mmUniversal Joint .......................................... $9.99 

GR3543 1/8" (3.2mm) to 1/8"Universal Joint ............................. $4.99 

GR3544 4mm to 4mm Universal Joint ....................................... $6.99 

GR3541 U-Joint End for 5mm Shaft ........................................... $4.99 

GR3344 Flexible Shaft Coupler 4mm-1/8" ............................... $16.99 

GR3345 Flexible Shaft Coupler 4mm-5mm .............................. $16.99 

Tiltable Marine 

Motor Mount 

Motor Mount Only! Does not include 

motor, coupling shaft or prop. 


Tiltable Marine Motor Mount ..................................................... $19.99 

Allows precise alignment of motor output shaft to prop shaft. 

This Ready-Built power pack 

SIMPLIFIES RC electric 

boat building! 

The length of the sterntube is 6.7”. Comes fully 

assembled as shown. Has the SPEED 400 motor (GR1794) and a 1.3” 

diameter 2-blade prop. One advantage of this straight drive is that there is no 

alignment problem during installation. 

GR1039 Multispeed 380 Boat Drive ........................................... $39.99 

Complete Speed 600 boat drive 


Multispeed 601 Boat 

Drive ................... $59.99 

Unit consists of Speed 600 

9.6V, Prop shaft with stern 

tube (7" from face of motor 

to tip of prop), bearing jacket with grease nipple, 1-1/2" carbon prop, 

noise suppression for motor, electrical lead for motor. 

Speed 700 Flex Drive for catamarans and hydros! 

GR1161 Graupner Hydrodrive Flexdrive 700 Turbo ............ $89.99 

Variable overall length. The flex shaft is 8.5” long. The flex shaft permits 

use in boats that have a raised center like catamarans. Flex shaft eliminates 

the water drag of a U-joint. A direct drive system for up to 10 cells. 

Graupner’s MONSTER outboard motor 


Outboard Motor GTX-800 

Speedline .................. $239.99 

Huge, 7” tall overall, outboard 

motor unit with Speed 820 BB 

Turbo Race 20V motor. Outboard 

drive has ballbearings, adjustable 

trim + or - 10 degrees. Themotor 

itself weighs 16 oz, and can 

run on 16 to 24V and at best 

efficiency uses 21 Amps current. 

112 


Graupner's Speed 600 outboard 

for sport and racing boats 

GR2370 Graupner GTX-650 

Speedline Outboard Motor ....................... $99.99 

7-1/4" tall overall, 2" wide, weighs 12.3 oz. Includes 

a Speed 600 Race 7.2 V motor with noise suppression 

and hook up wire. Power is transmitted from 

the motor to the propeller by means of a flexible 

shaft running in an efficient and virtually wear-free 

Teflon sleeve. The standard Speed 600 Race 7.2 V 

electric motor is good for medium-sized model 

boats; other motors of the Speed 500, 600 and 650 

series can also be installed. The outboard motor is 

mounted using 4 screws. Installed height can be 

adjusted 1/4”. The thrust angle can be adjusted + or – 5 degrees. Has 

water pickup for optional motor cooling coil (HLB211) 

Scale manuverability 

for a Scale Ship 


Bow Thruster with 

Speed 400 motor ......... $38.99 

6-1/2” long. Can be shortened 

to 2”. Complete unit with SPEED 400 electric motor. Bow thrusters 

are found on most full scale large ships. They permit side to side bow 

movement in tight places without having to go forward or backward. 

Jet Drives for Electric Motors 

JET drive for 

smaller boats 

GR2344 JET Drive “Pro-2 

Small” ................... $59.99 

For smaller boats to 30” long. Consists of ABS suction pipe, injection 

molded parts: impeller pipe, 29 mm impeller, thrust jet, guide vanes, 

control jet, tiller, and a stern tube with shaft. Basic unit for forward travel 

only. To reverse, order Reversing Mechanism GR2344/1. Length: 

7-1/2”. Length with Reversing Mechanism: 8-1/4”. For SPEED 700 

motor GR3308. 

GR2344/1 Reversing Mechanism for 

JET Drive “Pro-2 Small” .......................................................... $26.99 

This set contains an injection molded flange and an ABS reversing flap. 

GR2340 Basic JET Propulsion Boat 

Drive ............................................ $99.99 

11-3/8" long x 2-1/4" wide x 2-3/4" high. 

This is a copy of a full scale jet boat drive 

system. The basic unit allows forward 

travel only and steering. The turbine and chambers are made of injection molded 

nylon. The design and quality of the system is in the tradition of Graupner’s famous 

high quality propellers for boat and aircraft use. Shafts and bearings are corrosion 

resistant. Boats fitted with the JET drive can run in very shallow water since there is 

no rudder, prop shaft, or propeller hanging down. Power each JET drive with a 

SPEED 700 motor GR3308. 

GR2340/1 Reverse Mechanism, 

Jet Drive ................................. $26.99 

Order this to add reverse to your JET 

drive. When the reverse mechanism is lowered, the water 

stream is deflected forwards and the boat runs in reverse. 

When you lower the reverse mechanism at about half 

throttle, and give a rudder command, the boat rotates on a 

dime! 

GR2341 Toothed Belt Gearbox 2:1, Jet Drive........................................ $34.99 

Allows the motor to run at very high RPM. Reduces current draw by about half and 

doubles the running time. This might be desirable if you are using high speed 

motors . 

GR2736 Graupner Micro Speed 10 

Controller with Reverse ..... $88.99 

For 2 to 12V input, 10Amps constant 

current, 20 Amps max (one minute), 

30 Amps max (1 second). Weight one 

ounce, 1-7/8” x 7/8 x 3/8”. 

Boat motor controller 

with REVERSE 

60 Amp Proportional Boat Motor Controller for 

8 to 30 cells! 

JE600N Jeti JES 60 “Navy” 

Water Cooled Boat Motor 

Controller ............................. $77.99 

Our best speed controller for fast 

boats. 2x1x9/16”, about 1.5 oz. 

including wires. For 8 to 30 cells. 

Maximum currents: 6 cells — 25 

amps, 7 cells — 35 amps, 8 cells — 50 amps, 10 cells or more — 60 

amps. Water-cooled! “Navy” has inlet and outlet for water cooling. It 

has adjustment for setting the motor start point and a two color LED 

that indicates Zero power and Max power even without a motor connected. 

There is no BEC -- use a separate receiver battery. “Navy” has 

Opto coupling which keeps the controller free from motor induced interference. 

There is a current limiter to prevent burnout. No reverse. 

Water-cooled programmable brushless 

boat controller with Reverse 

JESAP50N Jeti "Advance 50" 

Navy Brushless Controller 

with Program Card ........ $137.99 

2-1/2" x 1" x 5/8", weighs 48 grams 

(1-3/4 oz.). With BEC active you 

can use 6-12 NiMH/NiCd, 2-4 Li- 

Poly, 5-17V, 5V BEC circuit. With 

BEC circuit de-activated (must use 

separate 4.8V battery for receiver 

and servos) you can use 6-16 

NiMH/NiCd, 2-6 Li-Poly, 5-25V. 

Maximum continuous current is 50 amps. Controller is water-cooled, 

connect water pickup lines to the two 4mm O.D. tubes. Comes with 

easy to use programming card. Six functions can be programmed with 

the card: Battery type (Ni-xx or Li-xx), Cut Off voltage (High or low), 

Power Limit (full power or 50% power), Reverse (off or on), Motor 

Timing (Low or High), Acceleration (Hard or Medium). Programming is 

retained even when battery is unplugged. Can be re-programmed in 

seconds if a change is desired. Unit has a built-in BEC (battery eliminator 

circuit) that can be used to run your servos and receiver from 

your motor batteries as long as they have a voltage under 17V. For 

boats with up to 25V power, the controller can be used without the 

BEC function. Comes with clear instructions for programming and use. 

Controller has gradual low voltage cut-off and is temperature overload 

protected. 

Waterproof receiver switch cover 

GR3940 Waterproof 

Switch Cover ............................. $5.99 

Fits the standard receiver switches that 

have the mounting screws 3/4" apart. 

Very soft rubber cover lets you move 

the switch. 

GR2345 JET Drive “Pro-2 Booster” .......................................... $58.99 

Length 8-3/4” (11” with Reversing Mechanism). Basic unit produces pure 

thrust forward only. Steerable and reversible when fitted with Steering & Reverse 

unit (GR2345/1). 

GR2345/1 Steering & Reverse for JET Drive “Pro-2 Booster” $33.99 

Adds steering and reverse capability to the JET Drive “Pro-2 Booster”. 

Motor for GR2345: 

GR6317 SPEED 700 BB Turbo 12 V Motor .................................... $44.99 

Dear Hobby-Lobby, 

I checked with three hobby stores searching for the Graupner CAM 

10X8 folding prop to fit my Radian. Nobody had it nor even tried to 

get it for me – until I spoke with Christina (Hobby-Lobby). 

Christina went out of her way to help. I told her the prop must be a 

6mm shoulder – that specification was not readily apparent, so she 

went & checked on it. About a minute later she was back with positive 

confirmation; “yes 6mm shoulder & yes Radian owners use this prop & 

like it.” 

Thank you, Christina, for solving my problem and helping me. 

Thanks Hobby Lobby for having the part in stock. 

New Happy Customer, 

Stephen V. 


Sealed Lead Batteries for Scale R/C 

Electric Boats 

For long duration running in 

boats. Since these are sealed 

they can be used in any position. 

For 12 volts connect two 6 volt 

batteries in series. 12 hour charge time. 

GR774 Graupner Sealed Battery, 6V, 3AH ......................... $28.99 

6 volt, 3 amp hour. 5.2” x 1.3” x 2.3”. 22 ounces. 


6 volt, 4 amp hour. 2.7” x 1.9” x 4”. 29 ounces. 


6 volt, 5.7 amp hour. 6” x 1.3” x 3.7”. 40 ounces. 

Steam Engine for Boats 

Complete 

working 

steam engine for boats! 

GR2170 Two Cylinder 

Reversible Steam 

Engine ......................... $529.99 

Burns butane lighter fuel. It is self-starting, reversible and throttleable. 

The boiler is 5.5" long, 2.3" diameter. The flywheel is 1.9" dia. The 

output shaft is 4mm.Made of nicely machined and chromed parts, it 

includes pressure tubing, relief valve, water sight glass, adjustable 

flame butane burner. Order: GR1047G gears to use GR2170 with a 

prop shaft. 

Plastic Boat 

Props 

Boat Propellers 

Scale boat 3 blade props, for 4mm threaded shafts. Rights and lefts. 

GR230830 30mm R ... $3.69 GR230841 40mm L ..... $3.89 

GR230831 30mm L ... $3.69 GR230850 50mm R ..... $4.39 

GR230835 35mm R ... $3.89 GR230851 50mm L ..... $4.39 

GR230836 35mm L ... $3.89 GR230860 60mm R ..... $4.79 

GR230840 40mm R ... $3.89 

Scale boat 4-blade props, for 4mm threaded shafts. 

GR231050 50mm R .... $5.29 GR231060 60mm R .... $5.69 

2 Blade nylon props, scale or speed, for 4mm shafts, rights and lefts: 

GR1124 35mm R ..... $3.99 

GR1125 35mm L ....... $3.99 

GR1128 45mm R ..... $3.99 

GR1129 45mm L ....... $3.99 

“Right” (R) means counterclockwise 

rotation when viewed 

from the back of the boat. 

“X-BRAND” props for electric Race Boats! 

On left is M4 prop, on right is Drive Dog 

Prop. Very rigid black fiberglass-filled high 

pitch nylon props made only for racing 

boats. There are two types: props to fit 

the 4mm Graupner shafts, and props to fit 

3/16” “Drive Dog” shafts (as used by Octura and others). Props turn 

counter-clockwise when viewed from the back of the boat. 

M4 props, diameter: 3/16" Drive Dog props, diameter: 

RA3007 35mm ..... $1.69 RA3001 35mm ............. $1.69 

RA3008 40mm ..... $1.79 RA3002 40mm ............. $1.69 

RA3009 45mm ..... $1.89 RA3003 45mm ............. $1.69 

RA3010 50mm ..... $1.99 RA3004 50mm ............. $1.89 

RA3005 52.5mm .......... $1.99 

RA3006 55mm ............. $1.99 

Glass, Carbon 

filled and drive dog 

props for hot race boats! 

Glass filled Carbon Filled Drive Dog 

Graupner Polished Black Glass-Filled Nylon 

Racing Boat Props 

(4mm threaded shaft (Pitch = 1.2 X diameter) 

Props turn counter-clockwise when viewed from the back of the boat. 

Part Number: Diameter: Price: 

GR231432 1.28" (32.5mm) ............................................. $4.39 

GR231440 1.58" (40mm) ................................................ $4.39 

GR231442 1.68" (42.5mm) ............................................. $4.79 

GR231447 1.87" (47.5mm) ............................................. $4.99 

GR231450 2.00" (50mm) ................................................ $4.99 

GR231452 2.07" (52.5mm) ............................................. $4.99 

Graupner Carbon-Filled Nylon Racing Boat Props 

(4mm threaded shaft (Pitch = 1.2 X diameter) 



GR231831 1.22” (31mm) ................................................ $6.69 

GR231842 1.65" (42mm) ................................................ $7.89 

Graupner Carbon-Filled Nylon Racing Boat Props 

3/16" and Drive-dog (Pitch = 1.2 X diameter) 



GR231742 1.65" (42mm) ................................................ $5.29 

GR699 Adjustable Boat Trim 

Tabs, pair ..................... $15.99 

1-3/16" wide, horizontal position is 1-3/4" long. 

These improve the longitudinal stability of a boat. 

The deflection angle is infinitely adjustable by 

the included brass turnbuckles. OK for gas or 

electric boats. Transom mounting holes are 

spaced 3/4" horizontally and 7/8" vertically. 

GR685 Graupner Adjustable Boat Trim Tabs, pair .................... $22.99 

40mm x 24mm x 16mm. 

Now you can use American 3/16” 

Drive-Dog Props on 

Graupner’s Race Boat Drives. 

GR2321 Graupner 3/16” Drive Dog 

for 4mm Shaft ......................................... $7.49 

This Drive Dog screws onto the standard European 4mm threaded boat 

shafts. This allows you to use standard USA 3/16” drive dog type boat 

props on the 4mm European threaded shafts. Included is the streamlined 

adapter nut. Black anodized. 

“I just want to pass along to you my thoughts on your customer service. 

I recently purchased an item off of the web through your company. 

It was defective and I was initially disappointed. I contacted your 

customer service department on a Saturday and I was treated with the 

utmost respect, and my problem was dealt with promptly, and 

courteously. I was extremely impressed and because of that I would not 

hesitate to purchase anything from your company again. It is nice to 

know that the Internet purchasers are just as valuable as a brick and 

mortar customer. I will and have recommended your company to other 

hobby enthusiasts. Thank you again for your outstanding customer 

service.” 

DJ C. 

LETTERS FROM OUR CUSTOMERS 

See even more products on our website! 

114 


NEW! 2.4 GHz radio and 2 flight batteries—everything you need included 

Comes with 

everything you need to fly 

in one box 

Display stand 

included, start your 

collection now 

ERC2000 Micro P-51D Mustang “Ridge Runner III” RTF .......................................................... $99.99 

14-1/2” wingspan, 13-1/2” long, 35 sq. in. wing area, 1.1 oz. flying weight. Ready to fly right out of the 

box. Comes with two flight batteries to keep you flying. The transmitter is a 2.4 GHz 4-channel radio. 

The P-51 is completely built and decorated in authentic Ridge Runner III colors and includes a preinstalled 

geared, brushed motor, receiver and proportional servos. Can be flown indoors or outdoors in 

calm winds. Designed with the sport flyer in mind - pilots will enjoy the stable flight characteristics, durability, 

and great scale details. Use the included stand to showcase your WWII Fighter. 

Lithium battery that 

conveniently charges 

from transmitter 

Realistic scale features 

include clear canopy, strut 

covers & authentic graphics 

An Exclusive Brand of 

Hobby Lobby International 

• For sport to intermediate pilots 

• Lightweight, durable foam construction 

• 3-Channel control: throttle, ailerons & elevator 

• Proportional servo controls for smooth, responsive flight 

• Includes two single cell lithium batteries that charge from transmitter 

• 8 to 10 minute flight times 

• Includes collectors stand for display 

• Geared, brushed motor with plenty of power for 

ground take-offs 

• Complete line of replacement parts available 

ERC2060 Micro RAF Spitfire RTF .................................... $99.99 


Customer Number (if known) 

Name 

Address 

City State Zip 

Phone No: (include area code) 

Foreign orders: Include phone number, fax number, or e-mail address 

Credit Card No: 

Exp. Date: 

5614 Franklin Pike Circle 

Brentwood, TN 37027 

(866) 512-1444 

Fax: (615) 377-6948 

MasterCard Visa Discover AMEX Check Money Order Paypal (Orders must be placed online) 

STOCK NUMBER: DESCRIPTION (Please Print) PRICE QTY TOTAL 

Terms & Details 

Merchandise Total 

9.25% Sales Tax (TN only) 

How to order: 

SHIPPING CHARGE 

Call us at (866) 512-1444 • Fax us at (615) 377-6948 

Visit our website at www.hobby-lobby.com 

TOTAL 

Mail in your orders. 

Write your name, complete address, and the stock number(s) and quantities of the item(s) you want and mail it in to 

us. Weʼve included a handy order form with this catalog for you. Enclose your check, money order, or your credit card 

number, including the expiration date, with the order. Please include your phone number and email address in case we 

have questions. 

Technical Assistance and Questions: 

We have broad knowledge about the RC hobby, and are happy to help you. You can call us at (866) 512-1444 or go 

online to our website at www.hobby-lobby.com for assistance. 

International Orders: 

Hobby Lobby ships to all addresses in Canada. Please note additional shipping charges will apply. Some items are 

restricted and may not be shipped via US Post Office to Canada. Oversize items and large parcels will be shipped via 

UPS. 

Other countries: 

Other countries that we ship to are shown on our Website. International shipping charges are based on the size and 

weight of the package; please check the information at www.hobby-lobby.com for charges. Certain items such as large 

packages are unable to be shipped via Priority Mail International due to size restrictions. All international shipments must 

be sent via a traceable shipping method. 

Your R/C Superstore • (866) 512-1444 • (615) 373-1444 • www.hobby-lobby.com

2 - ClamSITel

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?