For all the reviewers complaining about how it functions on arrival, remember, the hard work has been done for you, and is delivered for ~$150. How on earth you're expecting an additional 4-6 hours of "finishing" labor to be included at that price it is beyond me. Think of it more as a 98% finished $500 cross-slide at a crazy discount so long as you are willing to put in the sweat equity. After you disassemble and clean all the factory goop out of it, clean all of the parts, carefully de-burr the slides and hone them nice and smooth, grind the gibs a bit so they ride at the proper height in the dovetails and de-burr if necessary (mine were nearly perfect), then repack the thrust bearings and reassemble the acme rods careful to align so they don't bind or seem "bent" (the reports of bent acme rods are likely due to being offset slightly (loose manufacturing tolerances I'm sure, one of mine was dead center, the other was offset by .052" which made it appear bent during dry assembly since the thrust race was seating at a slight angle, so when reassembling I added a thin washer that seated nicely against the acme thread/rod axle shoulder thrust bearing race seat), and finally added a large lock-washer behind the hand wheels to eliminate a chance of rubbing against the slide body. I didn't put any spring tension on the thrust bearings, just lightweight torque barely past hand-tight, but I may in future. And the complaints on the paint job are warranted for sure, it's sloppy as can be....but it's not bad to the point of any negativity, just clean up any of the splashover and get on with it, just mill something already and don't worry about the paint job so much, you're going to be coating the entire slide with a thin film of oil through normal usage, maintenance, and whatnot, it should remain fairly well protected from airborne humidity...
Edit after I figured out the scale, the numbers are very wrong like others mentioned, and the graduations are all screwy, clearly it was not intended to be used on this device, probably handwheels that were originally for something else, or maybe some other vague alignment... who knows, like I said, they're screwy. But the breakdown is 4mm per revolution, it looks like they tried very unsuccessfully to divide it into 30ths. With a dividing head or a compass/printout/whatever, mark the wheel for 40ths, as-in .1 mm per graduation on the wheel scale X 40... The, albeit minor, irritating part of that of course is you're stuck in metric since this translates to a vague .1575 inches per revolution. I think I'll stick to the metric scale and simply do the conversions, I mean the wheel scales only get us so close anyway, bust out the calipers and mics for precision...
Add to your order
-
Coverage for accidental damage including drops, spills, and broken parts, as well as breakdowns (plans vary) -
24/7 support when you need it. -
Quick, easy, and frustration-free claims.
Cover this product:
3 Year Auto Accessories Protection Plan $21.99
Cover all of your eligible devices:
Asurion Complete Protect: One plan covers all eligible past and future purchases (Renews Monthly Until Cancelled) $16.99/month
Select a plan
Add to your order
- Coverage for accidental damage including drops, spills, and broken parts, as well as breakdowns (plans vary)
- 24/7 support when you need it.
- Quick, easy, and frustration-free claims.
Cover this product:
Select a plan
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Frequently bought together
$117.29
Get it as soon as Thursday, May 23
In Stock
+
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Similar items that may ship from close to you
Page 1 of 1 Start overPage 1 of 1
Product Description
Feature
|
|
|
|
|---|---|---|
Heavy-duty Cast IronMade of quality cast iron, which is anti-corrosion and rust resistance, more durable and ensures long service time. |
T Groove Fixing DesignThe compound table, with great hardness and stiffness, is high ground and not easy deformation. Three T-slots design can meet different force requirements. |
2 Axis MovementX-axis travel: 210 mm, Y-axis travel: 110 mm. You can adjust the optimal working position as you need. |
Feature
|
|
|
|
|---|---|---|
Adjustable HandleA metal handle with good texture is easy to adjust the directions. With a clear scale on it, it will be more accurate when in use. |
Quality Bolts & NutsThe drill press table will be more convenient to adjust the tightness of the worktable with a number of bolts and nuts. |
Extensive ApplicationThis milling working table can be used for most types of milling, drilling, and staging, ideal for all drill stands, drilling, and milling machines. |
Specifications
- Worktable length: 17.7 in / 450 mm
- Worktable width: 6.7 in / 170 mm
- Transverse travel(X-Route): 8.3 in / 210 mm
- Longitudinal travel(Y-Route): 4.3 in / 110 mm
- Mounting Hole Size (Transverse): 6.2 in / 15.7 cm
- Mounting Hole Size (Longitudinal): 5.3 in / 13.5 cm
- Chassis Size: 10 x 9 in / 26 x 23 cm
- Net Weight: 66 lbs / 30 kg
- Item Dimensions(L x W x H) : 23 x 13 x 5 in / 58 x 33 x 12.7 cm
Package Content
- 1 X Milling Support Table Worktable(450*170mm)
6.7 in / 170 mm Milling Machine Worktable
Large Worktable & Flexible Movement & High Precision
The two-axis workbench surface has three T-slots and provides dual-axis (lateral and cross) positioning via two handwheels for precise adjustments. Perfect for drilling grinding and milling operations.
- Premium Quality Structure
- Highly Polishing & Stiffness
- Adjustment in X Y Direction
- Tightness Adjustment
|
|
|
|---|---|---|
| Milling Working Table 17.7 x 6.7 Inch | Milling Machine Work Table 7.3 x 4 Inch | |
| Customer Reviews |
257
|
87
|
| Price | $117.29 | $79.99 |
| Worktable Dimensions | 450 x 170 mm / 17.7 x 6.7 in | 185.4 x 101.6 mm / 7.3 x 4 in |
| Transverse travel(X-Route) | 210 mm / 8.3 in | 81.3 mm / 3.2 in |
| Longitudinal travel(Y-Route): | 110 mm / 4.3 in | 35.6 mm / 1.4 in |
| Overall height | 100 mm / 3.9 in | 10.2 mm / 0.4 in |
| Item Weight | 56.88 lbs / 25.8 kg | 22.71 lbs / 10.3 kg |
| Package Dimensions | 540 x 310 x 115 mm / 21.3 x 12.2 x 4.5 in | 30 x 29 x 17 mm / 11.8 x 11.5 x 6.7 in |
Reviews with images
Very nice **for the price**
I was looking for something cheap-ish, but sturdy. I did a bunch of searching, reading and picked this one. I knew that in the price range I was looking, there'd be fit and finish issues. I planned on doing the work before buying it. Elbow grease to save some money. That being said, the packaging had the wheels and hardware bag loose in the box, zero packing materials, and the base wasn't attached to the crate... basically the worst packaging imaginable. But, all the parts were there and I don't care about cosmetics, no actual damage to the functionality. I was expecting packaging to a price point, but this misses the mark.The control wheels are so badly finished, the graduations are nearly illegible. I wasn't planning on using the graduations anyway, I knew they'd be useless. The paint job looked like it was done by a blind, drunk, angry penguin. Again, I was expecting it, but still pretty head-shaking when I saw it. It's like they painted as badly as possible on purpose.The casts are decent, not great, but workable. Accuracy of the ways and gibs are about what you expect from this price point - terrible but fixable.Took the entire thing apart in 10 minutes. Pins are locator pins only, not connective. I then sanded everything, repainted all non-bearing surfaces, oiled it up, and put it back together. I had to strip paint out of the ways and off of the hardware, including the bearing chases. I threw out the wing nuts and grabbed allen heads because it's a tool, not a toy. After fighting the with the gibs for a while, I got it to run as true as I need for a garage shop.The bottom line is that you get what you pay for in life. At this price point, this is what I expected. At lower price points, you get plastic. This is all steel and cast iron. At higher price points, you get better fit and finish. It met most expectations, fell below on a couple. For the price and the intended use, I would buy again.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on January 20, 2021
Reviewed in the United States on January 1, 2024
Reviewed in the United States on January 8, 2023
Heavy duty unit. Casting a little rough. Great for the price.
Reviewed in the United States on January 8, 2023
I like this unit. But the casting is rough in places but usable. All sellers need to provide a t-slot clamping kit info for a kit that will work with this unit. The t-slot is rough and 1/2” t-slot nuts will not fit with out grinding them down on bottom and sides to fit these slots. Other than that the unit is decent.
Reviewed in the United States on January 8, 2023
Images in this review
Top reviews from other countries
Dennis Smith
Value is there with a little sweat equity.
Reviewed in Canada on November 18, 2022
