Метценгерштейн 0 16 ноября, 2010 Опубликовано 16 ноября, 2010 · Жалоба Все смотрю, наоборот от IAR уходят в сторону GCC. Мне нужно проект для Wiznet W5100, написанные для GCC скомпилировать в IAR. Ругается на строку Fatal Error[Pe005]: could not open source file "avr/pgmspace.h" D:\works\projects\GOST\firmware\types.h 19 Это макросы для работы с флеш микроконтроллера. Может кто подскажет, от чего отталкиваться? Чем можно заменить этот "avr/pgmspace.h" ? Я так понял, что обращения к памяти тоже в коде править надо будет. Цитата Поделиться сообщением Ссылка на сообщение Поделиться на другие сайты Поделиться
ReAl 0 16 ноября, 2010 Опубликовано 16 ноября, 2010 · Жалоба О, а я на кошачьем уже черкнул пару строк. Обращения можно не править, накатать макросов по примеру приведенных. PSTR(), если есть, придётся выносить в отдльные const char __flash массивы и подставять их имена. Вроде бы всё. Цитата Поделиться сообщением Ссылка на сообщение Поделиться на другие сайты Поделиться
demiurg_spb 0 17 ноября, 2010 Опубликовано 17 ноября, 2010 · Жалоба Может кто подскажет, от чего отталкиваться? Чем можно заменить этот "avr/pgmspace.h" ?Для начала изучите этот файлик и все вопросы отпадут. Я так понял, что обращения к памяти тоже в коде править надо будет.Может и обойдётся - будет зависить от того, как макросы напишите. Цитата Поделиться сообщением Ссылка на сообщение Поделиться на другие сайты Поделиться
Метценгерштейн 0 17 ноября, 2010 Опубликовано 17 ноября, 2010 · Жалоба Да, я читал кошачий форум. Инета целый день не было. Чтобы изучить этот файлик- его надо откуда- то взять. Или для этого обязательно GCC устанавливать? Вышлете на почту? правлю макрос по совету AVReal Цитата Поделиться сообщением Ссылка на сообщение Поделиться на другие сайты Поделиться
Метценгерштейн 0 17 ноября, 2010 Опубликовано 17 ноября, 2010 · Жалоба AVReal, Я создал файл pgmSpaceForIAR.h включил его в проект и положил со всеми файлами проекта #include "pgmSpaceForIAR.h" вот его содержимое #define PROGMEM __flash typedef unsigned char __flash prog_uint8_t; typedef unsigned char __flash prog_uint8; typedef char __flash prog_char; // и далее аналогично по используемым типам #define pgm_read_byte(a) (*(unsigned char __flash *)(a)) #define pgm_read_word(a) (*(unsigned __flash *)(a)) // и так далее по использованным pgm_read-функциям по идее, все что unsigned char, заменится на __flash prog_uint8_t в чем отличие uint8_t от uint8 ? вроде обе беззнаковые целые 8 бит. компилятор ругается Error[Pe167]: argument of type "uint8_t (*)[4]" is incompatible with parameter of type "uint8 *" D:\works\projects\GOST\firmware\WIZnet_5100.c 36 Цитата Поделиться сообщением Ссылка на сообщение Поделиться на другие сайты Поделиться
ARV 0 17 ноября, 2010 Опубликовано 17 ноября, 2010 · Жалоба очевидно для вашего случая никакой разницы нет, С99-типы можете так же передефайнить, как вы поступили с prog_uint8_t. #define uint8_t uint8 и т.д. для uint16_t, int8_t и т.д. Цитата Поделиться сообщением Ссылка на сообщение Поделиться на другие сайты Поделиться
Метценгерштейн 0 17 ноября, 2010 Опубликовано 17 ноября, 2010 · Жалоба очевидно для вашего случая никакой разницы нет, С99-типы можете так же передефайнить, как вы поступили с prog_uint8_t.#define uint8_t uint8 и т.д. для uint16_t, int8_t и т.д. так я начал передефайнивать- ругается ведь... Error[Pe167]: argument of type "uint8_t (*)[4]" is incompatible with parameter of type "uint8 *" D:\works\projects\GOST\firmware\WIZnet_5100.c 36 или AVReal прав насчет неправильности поля IP структуры здесь http://radiokot.ru/forum/viewtopic.php?f=20&t=37867 Извиняюсь, что насоздал две темы в разных форумах. Думал- кот тухлый форум- здесь продублировал. Цитата Поделиться сообщением Ссылка на сообщение Поделиться на другие сайты Поделиться
demiurg_spb 0 18 ноября, 2010 Опубликовано 18 ноября, 2010 · Жалоба Чтобы изучить этот файлик- его надо откуда- то взять. Или для этого обязательно GCC устанавливать? Вышлете на почту? Держите: pgmspace.h Цитата Поделиться сообщением Ссылка на сообщение Поделиться на другие сайты Поделиться
Метценгерштейн 0 18 ноября, 2010 Опубликовано 18 ноября, 2010 (изменено) · Жалоба Хотел скачать, но avast сказал, что этот файл- вирус. Выкачал. Но аваст ругался на вредоносный сайт- не чисто там все- таки Изменено 18 ноября, 2010 пользователем Метценгерштейн Цитата Поделиться сообщением Ссылка на сообщение Поделиться на другие сайты Поделиться
ReAl 0 18 ноября, 2010 Опубликовано 18 ноября, 2010 · Жалоба Правильнее было послать сюда http://cvs.savannah.gnu.org/viewvc/avr-lib...amp;view=markup Цитата Поделиться сообщением Ссылка на сообщение Поделиться на другие сайты Поделиться
demiurg_spb 0 19 ноября, 2010 Опубликовано 19 ноября, 2010 · Жалоба Правильнее было послать сюда http://cvs.savannah.gnu.org/viewvc/avr-lib...amp;view=markup Это древний. Вот посвежее: /* Copyright © 2002-2007 Marek Michalkiewicz Copyright © 2006, Carlos Lamas Copyright © 2009-2010, Jan Waclawek All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* $Id: pgmspace.h 2169 2010-06-14 06:28:23Z arcanum $ */ /* pgmspace.h Contributors: Created by Marek Michalkiewicz <[email protected]> Eric B. Weddington <[email protected]> Wolfgang Haidinger <[email protected]> (pgm_read_dword()) Ivanov Anton <[email protected]> (pgm_read_float()) */ /** \file */ /** \defgroup avr_pgmspace <avr/pgmspace.h>: Program Space Utilities \code #include <avr/io.h> #include <avr/pgmspace.h> \endcode The functions in this module provide interfaces for a program to access data stored in program space (flash memory) of the device. In order to use these functions, the target device must support either the \c LPM or \c ELPM instructions. \note These functions are an attempt to provide some compatibility with header files that come with IAR C, to make porting applications between different compilers easier. This is not 100% compatibility though (GCC does not have full support for multiple address spaces yet). \note If you are working with strings which are completely based in ram, use the standard string functions described in \ref avr_string. \note If possible, put your constant tables in the lower 64 KB and use pgm_read_byte_near() or pgm_read_word_near() instead of pgm_read_byte_far() or pgm_read_word_far() since it is more efficient that way, and you can still use the upper 64K for executable code. All functions that are suffixed with a \c _P \e require their arguments to be in the lower 64 KB of the flash ROM, as they do not use ELPM instructions. This is normally not a big concern as the linker setup arranges any program space constants declared using the macros from this header file so they are placed right after the interrupt vectors, and in front of any executable code. However, it can become a problem if there are too many of these constants, or for bootloaders on devices with more than 64 KB of ROM. <em>All these functions will not work in that situation.</em> \note For <b>Xmega</b> devices, make sure the NVM controller command register (\c NVM.CMD or \c NVM_CMD) is set to 0x00 (NOP) before using any of these functions. */ #ifndef __PGMSPACE_H_ #define __PGMSPACE_H_ 1 #define __need_size_t #include <inttypes.h> #include <stddef.h> #include <avr/io.h> #ifndef __ATTR_CONST__ #define __ATTR_CONST__ __attribute__((__const__)) #endif #ifndef __ATTR_PROGMEM__ #define __ATTR_PROGMEM__ __attribute__((__progmem__)) #endif #ifndef __ATTR_PURE__ #define __ATTR_PURE__ __attribute__((__pure__)) #endif /** \ingroup avr_pgmspace \def PROGMEM Attribute to use in order to declare an object being located in flash ROM. */ #define PROGMEM __ATTR_PROGMEM__ #ifdef __cplusplus extern "C" { #endif #if defined(__DOXYGEN__) /* * Doxygen doesn't grok the appended attribute syntax of * GCC, and confuses the typedefs with function decls, so * supply a doxygen-friendly view. */ /** \ingroup avr_pgmspace \typedef prog_void Type of a "void" object located in flash ROM. Does not make much sense by itself, but can be used to declare a "void *" object in flash ROM. */ typedef void PROGMEM prog_void; /** \ingroup avr_pgmspace \typedef prog_char Type of a "char" object located in flash ROM. */ typedef char PROGMEM prog_char; /** \ingroup avr_pgmspace \typedef prog_uchar Type of an "unsigned char" object located in flash ROM. */ typedef unsigned char PROGMEM prog_uchar; /** \ingroup avr_pgmspace \typedef prog_int8_t Type of an "int8_t" object located in flash ROM. */ typedef int8_t PROGMEM prog_int8_t; /** \ingroup avr_pgmspace \typedef prog_uint8_t Type of an "uint8_t" object located in flash ROM. */ typedef uint8_t PROGMEM prog_uint8_t; /** \ingroup avr_pgmspace \typedef prog_int16_t Type of an "int16_t" object located in flash ROM. */ typedef int16_t PROGMEM prog_int16_t; /** \ingroup avr_pgmspace \typedef prog_uint16_t Type of an "uint16_t" object located in flash ROM. */ typedef uint16_t PROGMEM prog_uint16_t; /** \ingroup avr_pgmspace \typedef prog_int32_t Type of an "int32_t" object located in flash ROM. */ typedef int32_t PROGMEM prog_int32_t; /** \ingroup avr_pgmspace \typedef prog_uint32_t Type of an "uint32_t" object located in flash ROM. */ typedef uint32_t PROGMEM prog_uint32_t; /** \ingroup avr_pgmspace \typedef prog_int64_t Type of an "int64_t" object located in flash ROM. \note This type is not available when the compiler option -mint8 is in effect. */ typedef int64_t PROGMEM prog_int64_t; /** \ingroup avr_pgmspace \typedef prog_uint64_t Type of an "uint64_t" object located in flash ROM. \note This type is not available when the compiler option -mint8 is in effect. */ typedef uint64_t PROGMEM prog_uint64_t; #else /* !DOXYGEN */ typedef void prog_void PROGMEM; typedef char prog_char PROGMEM; typedef unsigned char prog_uchar PROGMEM; typedef int8_t prog_int8_t PROGMEM; typedef uint8_t prog_uint8_t PROGMEM; typedef int16_t prog_int16_t PROGMEM; typedef uint16_t prog_uint16_t PROGMEM; typedef int32_t prog_int32_t PROGMEM; typedef uint32_t prog_uint32_t PROGMEM; #if !__USING_MINT8 typedef int64_t prog_int64_t PROGMEM; typedef uint64_t prog_uint64_t PROGMEM; #endif #endif /* defined(__DOXYGEN__) */ /* Although in C, we can get away with just using __c, it does not work in C++. We need to use &__c[0] to avoid the compiler puking. Dave Hylands explaned it thusly, Let's suppose that we use PSTR("Test"). In this case, the type returned by __c is a prog_char[5] and not a prog_char *. While these are compatible, they aren't the same thing (especially in C++). The type returned by &__c[0] is a prog_char *, which explains why it works fine. */ #if defined(__DOXYGEN__) /* * The #define below is just a dummy that serves documentation * purposes only. */ /** \ingroup avr_pgmspace \def PSTR(s) Used to declare a static pointer to a string in program space. */ # define PSTR(s) ((const PROGMEM char *)(s)) #else /* !DOXYGEN */ /* The real thing. */ # define PSTR(s) (__extension__({static char __c[] PROGMEM = (s); &__c[0];})) #endif /* DOXYGEN */ #define __LPM_classic__(addr) \ (__extension__({ \ uint16_t __addr16 = (uint16_t)(addr); \ uint8_t __result; \ __asm__ \ ( \ "lpm" "\n\t" \ "mov %0, r0" "\n\t" \ : "=r" (__result) \ : "z" (__addr16) \ : "r0" \ ); \ __result; \ })) #define __LPM_enhanced__(addr) \ (__extension__({ \ uint16_t __addr16 = (uint16_t)(addr); \ uint8_t __result; \ __asm__ \ ( \ "lpm %0, Z" "\n\t" \ : "=r" (__result) \ : "z" (__addr16) \ ); \ __result; \ })) #define __LPM_word_classic__(addr) \ (__extension__({ \ uint16_t __addr16 = (uint16_t)(addr); \ uint16_t __result; \ __asm__ \ ( \ "lpm" "\n\t" \ "mov %A0, r0" "\n\t" \ "adiw r30, 1" "\n\t" \ "lpm" "\n\t" \ "mov %B0, r0" "\n\t" \ : "=r" (__result), "=z" (__addr16) \ : "1" (__addr16) \ : "r0" \ ); \ __result; \ })) #define __LPM_word_enhanced__(addr) \ (__extension__({ \ uint16_t __addr16 = (uint16_t)(addr); \ uint16_t __result; \ __asm__ \ ( \ "lpm %A0, Z+" "\n\t" \ "lpm %B0, Z" "\n\t" \ : "=r" (__result), "=z" (__addr16) \ : "1" (__addr16) \ ); \ __result; \ })) #define __LPM_dword_classic__(addr) \ (__extension__({ \ uint16_t __addr16 = (uint16_t)(addr); \ uint32_t __result; \ __asm__ \ ( \ "lpm" "\n\t" \ "mov %A0, r0" "\n\t" \ "adiw r30, 1" "\n\t" \ "lpm" "\n\t" \ "mov %B0, r0" "\n\t" \ "adiw r30, 1" "\n\t" \ "lpm" "\n\t" \ "mov %C0, r0" "\n\t" \ "adiw r30, 1" "\n\t" \ "lpm" "\n\t" \ "mov %D0, r0" "\n\t" \ : "=r" (__result), "=z" (__addr16) \ : "1" (__addr16) \ : "r0" \ ); \ __result; \ })) #define __LPM_dword_enhanced__(addr) \ (__extension__({ \ uint16_t __addr16 = (uint16_t)(addr); \ uint32_t __result; \ __asm__ \ ( \ "lpm %A0, Z+" "\n\t" \ "lpm %B0, Z+" "\n\t" \ "lpm %C0, Z+" "\n\t" \ "lpm %D0, Z" "\n\t" \ : "=r" (__result), "=z" (__addr16) \ : "1" (__addr16) \ ); \ __result; \ })) #define __LPM_float_classic__(addr) \ (__extension__({ \ uint16_t __addr16 = (uint16_t)(addr); \ float __result; \ __asm__ \ ( \ "lpm" "\n\t" \ "mov %A0, r0" "\n\t" \ "adiw r30, 1" "\n\t" \ "lpm" "\n\t" \ "mov %B0, r0" "\n\t" \ "adiw r30, 1" "\n\t" \ "lpm" "\n\t" \ "mov %C0, r0" "\n\t" \ "adiw r30, 1" "\n\t" \ "lpm" "\n\t" \ "mov %D0, r0" "\n\t" \ : "=r" (__result), "=z" (__addr16) \ : "1" (__addr16) \ : "r0" \ ); \ __result; \ })) #define __LPM_float_enhanced__(addr) \ (__extension__({ \ uint16_t __addr16 = (uint16_t)(addr); \ float __result; \ __asm__ \ ( \ "lpm %A0, Z+" "\n\t" \ "lpm %B0, Z+" "\n\t" \ "lpm %C0, Z+" "\n\t" \ "lpm %D0, Z" "\n\t" \ : "=r" (__result), "=z" (__addr16) \ : "1" (__addr16) \ ); \ __result; \ })) #if defined (__AVR_HAVE_LPMX__) #define __LPM(addr) __LPM_enhanced__(addr) #define __LPM_word(addr) __LPM_word_enhanced__(addr) #define __LPM_dword(addr) __LPM_dword_enhanced__(addr) #define __LPM_float(addr) __LPM_float_enhanced__(addr) #else #define __LPM(addr) __LPM_classic__(addr) #define __LPM_word(addr) __LPM_word_classic__(addr) #define __LPM_dword(addr) __LPM_dword_classic__(addr) #define __LPM_float(addr) __LPM_float_classic__(addr) #endif /** \ingroup avr_pgmspace \def pgm_read_byte_near(address_short) Read a byte from the program space with a 16-bit (near) address. \note The address is a byte address. The address is in the program space. */ #define pgm_read_byte_near(address_short) __LPM((uint16_t)(address_short)) /** \ingroup avr_pgmspace \def pgm_read_word_near(address_short) Read a word from the program space with a 16-bit (near) address. \note The address is a byte address. The address is in the program space. */ #define pgm_read_word_near(address_short) __LPM_word((uint16_t)(address_short)) /** \ingroup avr_pgmspace \def pgm_read_dword_near(address_short) Read a double word from the program space with a 16-bit (near) address. \note The address is a byte address. The address is in the program space. */ #define pgm_read_dword_near(address_short) \ __LPM_dword((uint16_t)(address_short)) /** \ingroup avr_pgmspace \def pgm_read_float_near(address_short) Read a float from the program space with a 16-bit (near) address. \note The address is a byte address. The address is in the program space. */ #define pgm_read_float_near(address_short) \ __LPM_float((uint16_t)(address_short)) #if defined(RAMPZ) || defined(__DOXYGEN__) /* Only for devices with more than 64K of program memory. RAMPZ must be defined (see iom103.h, iom128.h). */ /* The classic functions are needed for ATmega103. */ #define __ELPM_classic__(addr) \ (__extension__({ \ uint32_t __addr32 = (uint32_t)(addr); \ uint8_t __result; \ __asm__ \ ( \ "out %2, %C1" "\n\t" \ "mov r31, %B1" "\n\t" \ "mov r30, %A1" "\n\t" \ "elpm" "\n\t" \ "mov %0, r0" "\n\t" \ : "=r" (__result) \ : "r" (__addr32), \ "I" (_SFR_IO_ADDR(RAMPZ)) \ : "r0", "r30", "r31" \ ); \ __result; \ })) #define __ELPM_enhanced__(addr) \ (__extension__({ \ uint32_t __addr32 = (uint32_t)(addr); \ uint8_t __result; \ __asm__ \ ( \ "out %2, %C1" "\n\t" \ "movw r30, %1" "\n\t" \ "elpm %0, Z+" "\n\t" \ : "=r" (__result) \ : "r" (__addr32), \ "I" (_SFR_IO_ADDR(RAMPZ)) \ : "r30", "r31" \ ); \ __result; \ })) #define __ELPM_xmega__(addr) \ (__extension__({ \ uint32_t __addr32 = (uint32_t)(addr); \ uint8_t __result; \ __asm__ \ ( \ "in __tmp_reg__, %2" "\n\t" \ "out %2, %C1" "\n\t" \ "movw r30, %1" "\n\t" \ "elpm %0, Z+" "\n\t" \ "out %2, __tmp_reg__" \ : "=r" (__result) \ : "r" (__addr32), \ "I" (_SFR_IO_ADDR(RAMPZ)) \ : "r30", "r31" \ ); \ __result; \ })) #define __ELPM_word_classic__(addr) \ (__extension__({ \ uint32_t __addr32 = (uint32_t)(addr); \ uint16_t __result; \ __asm__ \ ( \ "out %2, %C1" "\n\t" \ "mov r31, %B1" "\n\t" \ "mov r30, %A1" "\n\t" \ "elpm" "\n\t" \ "mov %A0, r0" "\n\t" \ "in r0, %2" "\n\t" \ "adiw r30, 1" "\n\t" \ "adc r0, __zero_reg__" "\n\t" \ "out %2, r0" "\n\t" \ "elpm" "\n\t" \ "mov %B0, r0" "\n\t" \ : "=r" (__result) \ : "r" (__addr32), \ "I" (_SFR_IO_ADDR(RAMPZ)) \ : "r0", "r30", "r31" \ ); \ __result; \ })) #define __ELPM_word_enhanced__(addr) \ (__extension__({ \ uint32_t __addr32 = (uint32_t)(addr); \ uint16_t __result; \ __asm__ \ ( \ "out %2, %C1" "\n\t" \ "movw r30, %1" "\n\t" \ "elpm %A0, Z+" "\n\t" \ "elpm %B0, Z" "\n\t" \ : "=r" (__result) \ : "r" (__addr32), \ "I" (_SFR_IO_ADDR(RAMPZ)) \ : "r30", "r31" \ ); \ __result; \ })) #define __ELPM_word_xmega__(addr) \ (__extension__({ \ uint32_t __addr32 = (uint32_t)(addr); \ uint16_t __result; \ __asm__ \ ( \ "in __tmp_reg__, %2" "\n\t" \ "out %2, %C1" "\n\t" \ "movw r30, %1" "\n\t" \ "elpm %A0, Z+" "\n\t" \ "elpm %B0, Z" "\n\t" \ "out %2, __tmp_reg__" \ : "=r" (__result) \ : "r" (__addr32), \ "I" (_SFR_IO_ADDR(RAMPZ)) \ : "r30", "r31" \ ); \ __result; \ })) #define __ELPM_dword_classic__(addr) \ (__extension__({ \ uint32_t __addr32 = (uint32_t)(addr); \ uint32_t __result; \ __asm__ \ ( \ "out %2, %C1" "\n\t" \ "mov r31, %B1" "\n\t" \ "mov r30, %A1" "\n\t" \ "elpm" "\n\t" \ "mov %A0, r0" "\n\t" \ "in r0, %2" "\n\t" \ "adiw r30, 1" "\n\t" \ "adc r0, __zero_reg__" "\n\t" \ "out %2, r0" "\n\t" \ "elpm" "\n\t" \ "mov %B0, r0" "\n\t" \ "in r0, %2" "\n\t" \ "adiw r30, 1" "\n\t" \ "adc r0, __zero_reg__" "\n\t" \ "out %2, r0" "\n\t" \ "elpm" "\n\t" \ "mov %C0, r0" "\n\t" \ "in r0, %2" "\n\t" \ "adiw r30, 1" "\n\t" \ "adc r0, __zero_reg__" "\n\t" \ "out %2, r0" "\n\t" \ "elpm" "\n\t" \ "mov %D0, r0" "\n\t" \ : "=r" (__result) \ : "r" (__addr32), \ "I" (_SFR_IO_ADDR(RAMPZ)) \ : "r0", "r30", "r31" \ ); \ __result; \ })) #define __ELPM_dword_enhanced__(addr) \ (__extension__({ \ uint32_t __addr32 = (uint32_t)(addr); \ uint32_t __result; \ __asm__ \ ( \ "out %2, %C1" "\n\t" \ "movw r30, %1" "\n\t" \ "elpm %A0, Z+" "\n\t" \ "elpm %B0, Z+" "\n\t" \ "elpm %C0, Z+" "\n\t" \ "elpm %D0, Z" "\n\t" \ : "=r" (__result) \ : "r" (__addr32), \ "I" (_SFR_IO_ADDR(RAMPZ)) \ : "r30", "r31" \ ); \ __result; \ })) #define __ELPM_dword_xmega__(addr) \ (__extension__({ \ uint32_t __addr32 = (uint32_t)(addr); \ uint32_t __result; \ __asm__ \ ( \ "in __tmp_reg__, %2" "\n\t" \ "out %2, %C1" "\n\t" \ "movw r30, %1" "\n\t" \ "elpm %A0, Z+" "\n\t" \ "elpm %B0, Z+" "\n\t" \ "elpm %C0, Z+" "\n\t" \ "elpm %D0, Z" "\n\t" \ "out %2, __tmp_reg__" \ : "=r" (__result) \ : "r" (__addr32), \ "I" (_SFR_IO_ADDR(RAMPZ)) \ : "r30", "r31" \ ); \ __result; \ })) #define __ELPM_float_classic__(addr) \ (__extension__({ \ uint32_t __addr32 = (uint32_t)(addr); \ float __result; \ __asm__ \ ( \ "out %2, %C1" "\n\t" \ "mov r31, %B1" "\n\t" \ "mov r30, %A1" "\n\t" \ "elpm" "\n\t" \ "mov %A0, r0" "\n\t" \ "in r0, %2" "\n\t" \ "adiw r30, 1" "\n\t" \ "adc r0, __zero_reg__" "\n\t" \ "out %2, r0" "\n\t" \ "elpm" "\n\t" \ "mov %B0, r0" "\n\t" \ "in r0, %2" "\n\t" \ "adiw r30, 1" "\n\t" \ "adc r0, __zero_reg__" "\n\t" \ "out %2, r0" "\n\t" \ "elpm" "\n\t" \ "mov %C0, r0" "\n\t" \ "in r0, %2" "\n\t" \ "adiw r30, 1" "\n\t" \ "adc r0, __zero_reg__" "\n\t" \ "out %2, r0" "\n\t" \ "elpm" "\n\t" \ "mov %D0, r0" "\n\t" \ : "=r" (__result) \ : "r" (__addr32), \ "I" (_SFR_IO_ADDR(RAMPZ)) \ : "r0", "r30", "r31" \ ); \ __result; \ })) #define __ELPM_float_enhanced__(addr) \ (__extension__({ \ uint32_t __addr32 = (uint32_t)(addr); \ float __result; \ __asm__ \ ( \ "out %2, %C1" "\n\t" \ "movw r30, %1" "\n\t" \ "elpm %A0, Z+" "\n\t" \ "elpm %B0, Z+" "\n\t" \ "elpm %C0, Z+" "\n\t" \ "elpm %D0, Z" "\n\t" \ : "=r" (__result) \ : "r" (__addr32), \ "I" (_SFR_IO_ADDR(RAMPZ)) \ : "r30", "r31" \ ); \ __result; \ })) #define __ELPM_float_xmega__(addr) \ (__extension__({ \ uint32_t __addr32 = (uint32_t)(addr); \ float __result; \ __asm__ \ ( \ "in __tmp_reg__, %2" "\n\t" \ "out %2, %C1" "\n\t" \ "movw r30, %1" "\n\t" \ "elpm %A0, Z+" "\n\t" \ "elpm %B0, Z+" "\n\t" \ "elpm %C0, Z+" "\n\t" \ "elpm %D0, Z" "\n\t" \ "out %2, __tmp_reg__" \ : "=r" (__result) \ : "r" (__addr32), \ "I" (_SFR_IO_ADDR(RAMPZ)) \ : "r30", "r31" \ ); \ __result; \ })) /* Check for architectures that implement RAMPD (avrxmega3, avrxmega5, avrxmega7) as they need to save/restore RAMPZ for ELPM macros so it does not interfere with data accesses. */ #if defined (__AVR_HAVE_RAMPD__) #define __ELPM(addr) __ELPM_xmega__(addr) #define __ELPM_word(addr) __ELPM_word_xmega__(addr) #define __ELPM_dword(addr) __ELPM_dword_xmega__(addr) #define __ELPM_float(addr) __ELPM_float_xmega__(addr) #else #if defined (__AVR_HAVE_LPMX__) #define __ELPM(addr) __ELPM_enhanced__(addr) #define __ELPM_word(addr) __ELPM_word_enhanced__(addr) #define __ELPM_dword(addr) __ELPM_dword_enhanced__(addr) #define __ELPM_float(addr) __ELPM_float_enhanced__(addr) #else #define __ELPM(addr) __ELPM_classic__(addr) #define __ELPM_word(addr) __ELPM_word_classic__(addr) #define __ELPM_dword(addr) __ELPM_dword_classic__(addr) #define __ELPM_float(addr) __ELPM_float_classic__(addr) #endif /* __AVR_HAVE_LPMX__ */ #endif /* __AVR_HAVE_RAMPD__ */ /** \ingroup avr_pgmspace \def pgm_read_byte_far(address_long) Read a byte from the program space with a 32-bit (far) address. \note The address is a byte address. The address is in the program space. */ #define pgm_read_byte_far(address_long) __ELPM((uint32_t)(address_long)) /** \ingroup avr_pgmspace \def pgm_read_word_far(address_long) Read a word from the program space with a 32-bit (far) address. \note The address is a byte address. The address is in the program space. */ #define pgm_read_word_far(address_long) __ELPM_word((uint32_t)(address_long)) /** \ingroup avr_pgmspace \def pgm_read_dword_far(address_long) Read a double word from the program space with a 32-bit (far) address. \note The address is a byte address. The address is in the program space. */ #define pgm_read_dword_far(address_long) __ELPM_dword((uint32_t)(address_long)) /** \ingroup avr_pgmspace \def pgm_read_float_far(address_long) Read a float from the program space with a 32-bit (far) address. \note The address is a byte address. The address is in the program space. */ #define pgm_read_float_far(address_long) __ELPM_float((uint32_t)(address_long)) #endif /* RAMPZ or __DOXYGEN__ */ /** \ingroup avr_pgmspace \def pgm_read_byte(address_short) Read a byte from the program space with a 16-bit (near) address. \note The address is a byte address. The address is in the program space. */ #define pgm_read_byte(address_short) pgm_read_byte_near(address_short) /** \ingroup avr_pgmspace \def pgm_read_word(address_short) Read a word from the program space with a 16-bit (near) address. \note The address is a byte address. The address is in the program space. */ #define pgm_read_word(address_short) pgm_read_word_near(address_short) /** \ingroup avr_pgmspace \def pgm_read_dword(address_short) Read a double word from the program space with a 16-bit (near) address. \note The address is a byte address. The address is in the program space. */ #define pgm_read_dword(address_short) pgm_read_dword_near(address_short) /** \ingroup avr_pgmspace \def pgm_read_float(address_short) Read a float from the program space with a 16-bit (near) address. \note The address is a byte address. The address is in the program space. */ #define pgm_read_float(address_short) pgm_read_float_near(address_short) /** \ingroup avr_pgmspace \def PGM_P Used to declare a variable that is a pointer to a string in program space. */ #ifndef PGM_P #define PGM_P const prog_char * #endif /** \ingroup avr_pgmspace \def PGM_VOID_P Used to declare a generic pointer to an object in program space. */ #ifndef PGM_VOID_P #define PGM_VOID_P const prog_void * #endif /* pgm_get_far_address() macro This macro facilitates the obtention of a 32 bit "far" pointer (only 24 bits used) to data even passed the 64KB limit for the 16 bit ordinary pointer. It is similar to the '&' operator, with some limitations. Comments: - The overhead is minimal and it's mainly due to the 32 bit size operation. - 24 bit sizes guarantees the code compatibility for use in future devices. - hh8() is an undocumented feature but seems to give the third significant byte of a 32 bit data and accepts symbols, complementing the functionality of hi8() and lo8(). There is not an equivalent assembler function to get the high significant byte. - 'var' has to be resolved at linking time as an existing symbol, i.e, a simple type variable name, an array name (not an indexed element of the array, if the index is a constant the compiler does not complain but fails to get the address if optimization is enabled), a struct name or a struct field name, a function identifier, a linker defined identifier,... - The returned value is the identifier's VMA (virtual memory address) determined by the linker and falls in the corresponding memory region. The AVR Harvard architecture requires non overlapping VMA areas for the multiple address spaces in the processor: Flash ROM, RAM, and EEPROM. Typical offset for this are 0x00000000, 0x00800xx0, and 0x00810000 respectively, derived from the linker script used and linker options. The value returned can be seen then as a universal pointer. */ #define pgm_get_far_address(var) \ ({ \ uint_farptr_t tmp; \ \ __asm__ __volatile__( \ \ "ldi %A0, lo8(%1)" "\n\t" \ "ldi %B0, hi8(%1)" "\n\t" \ "ldi %C0, hh8(%1)" "\n\t" \ "clr %D0" "\n\t" \ : \ "=d" (tmp) \ : \ "p" (&(var)) \ ); \ tmp; \ }) extern PGM_VOID_P memchr_P(PGM_VOID_P, int __val, size_t __len) __ATTR_CONST__; extern int memcmp_P(const void *, PGM_VOID_P, size_t) __ATTR_PURE__; extern void *memccpy_P(void *, PGM_VOID_P, int __val, size_t); extern void *memcpy_P(void *, PGM_VOID_P, size_t); extern void *memmem_P(const void *, size_t, PGM_VOID_P, size_t) __ATTR_PURE__; extern PGM_VOID_P memrchr_P(PGM_VOID_P, int __val, size_t __len) __ATTR_CONST__; extern char *strcat_P(char *, PGM_P); extern PGM_P strchr_P(PGM_P, int __val) __ATTR_CONST__; extern PGM_P strchrnul_P(PGM_P, int __val) __ATTR_CONST__; extern int strcmp_P(const char *, PGM_P) __ATTR_PURE__; extern char *strcpy_P(char *, PGM_P); extern int strcasecmp_P(const char *, PGM_P) __ATTR_PURE__; extern char *strcasestr_P(const char *, PGM_P) __ATTR_PURE__; extern size_t strcspn_P(const char *__s, PGM_P __reject) __ATTR_PURE__; extern size_t strlcat_P (char *, PGM_P, size_t ); extern size_t strlcpy_P (char *, PGM_P, size_t ); extern size_t strlen_P(PGM_P) __ATTR_CONST__; /* program memory can't change */ extern size_t strnlen_P(PGM_P, size_t) __ATTR_CONST__; /* program memory can't change */ extern int strncmp_P(const char *, PGM_P, size_t) __ATTR_PURE__; extern int strncasecmp_P(const char *, PGM_P, size_t) __ATTR_PURE__; extern char *strncat_P(char *, PGM_P, size_t); extern char *strncpy_P(char *, PGM_P, size_t); extern char *strpbrk_P(const char *__s, PGM_P __accept) __ATTR_PURE__; extern PGM_P strrchr_P(PGM_P, int __val) __ATTR_CONST__; extern char *strsep_P(char **__sp, PGM_P __delim); extern size_t strspn_P(const char *__s, PGM_P __accept) __ATTR_PURE__; extern char *strstr_P(const char *, PGM_P) __ATTR_PURE__; extern char *strtok_P(char *__s, PGM_P __delim); extern char *strtok_rP(char *__s, PGM_P __delim, char **__last); extern size_t strlen_PF (uint_farptr_t src) __ATTR_CONST__; /* program memory can't change */ extern size_t strnlen_PF (uint_farptr_t src, size_t len) __ATTR_CONST__; /* program memory can't change */ extern void *memcpy_PF (void *dest, uint_farptr_t src, size_t len); extern char *strcpy_PF (char *dest, uint_farptr_t src); extern char *strncpy_PF (char *dest, uint_farptr_t src, size_t len); extern char *strcat_PF (char *dest, uint_farptr_t src); extern size_t strlcat_PF (char *dst, uint_farptr_t src, size_t siz); extern char *strncat_PF (char *dest, uint_farptr_t src, size_t len); extern int strcmp_PF (const char *s1, uint_farptr_t s2) __ATTR_PURE__; extern int strncmp_PF (const char *s1, uint_farptr_t s2, size_t n) __ATTR_PURE__; extern int strcasecmp_PF (const char *s1, uint_farptr_t s2) __ATTR_PURE__; extern int strncasecmp_PF (const char *s1, uint_farptr_t s2, size_t n) __ATTR_PURE__; extern char *strstr_PF (const char *s1, uint_farptr_t s2); extern size_t strlcpy_PF (char *dst, uint_farptr_t src, size_t siz); extern int memcmp_PF(const void *, uint_farptr_t, size_t) __ATTR_PURE__; #ifdef __cplusplus } #endif #endif /* __PGMSPACE_H_ */ Contributors: Created by Marek Michalkiewicz <[email protected]> Eric B. Weddington <[email protected]> Wolfgang Haidinger <[email protected]> (pgm_read_dword()) Ivanov Anton <[email protected]> (pgm_read_float()) pgm_read_float - моих рук дело:-) Цитата Поделиться сообщением Ссылка на сообщение Поделиться на другие сайты Поделиться
ReAl 0 19 ноября, 2010 Опубликовано 19 ноября, 2010 · Жалоба Это древний. Вот посвежее: Тьху, точно, давно не заглядывал и не заметил, что они на subversion уже перелезли. http://svn.savannah.nongnu.org/viewvc/trun...amp;view=markup pgm_read_float - моих рук дело:-)Вот не помню, откуда, но знаю :-) Цитата Поделиться сообщением Ссылка на сообщение Поделиться на другие сайты Поделиться
